IMac :: Getting Error 36 On 24" When Transfer Large Files From Desktop To External Drives
Nov 20, 2010
I have a 24" iMac and it was running fine the other week and now I get this annoying error=36 whenever I try to transfer large files from desktop to my external drives. It goes about 1/4 way with the transfers then stops with the error=36 message. I've tried to reset the pram but it won't let me. It just keeps on restarting to the same gray screen with the single short beep tone over and over until I let go of the option, command, P & R buttons and restarts normally but does not reset the pram.
View 1 Replies
ADVERTISEMENT
May 25, 2012
I am a photographer. My Mac Tower and Macbook Pros display my external hard drives on the desktop. That makes workflow so much easier. I just purchased an I-Mac and have to access the external HDs through the menu. how I can display the icons for the external HDs on my desktop?Â
View 4 Replies
View Related
Nov 22, 2009
Im trying to transfer extremely large files from one external hard drive to another, a La Cie to a WD. By large i mean 100-300GB. It starts to transfer and then says a file containg that name already exists. here is how it is setup La Cie(Content) --Firewire 800---->Macbook Pro---FireWire 400--> WD(empty)
im trying the drag and drop method. Am i doing something wrong is there a free program that can do this for me?
View 3 Replies
View Related
May 16, 2009
I need to transfer some large iMovie project files (~30gb) from a Macbook Pro to a new Macbook, which has no firewire port. Can this be done easily?
View 5 Replies
View Related
Mar 17, 2012
I just bought my first imac and need direction to install files from my external hard drive.
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.3)
View 1 Replies
View Related
Oct 15, 2009
I have an IMAC and I am having problems transferring video files I download to my external hard drive. I had trouble playing the files at first because it was not readable with Quicktime. I downloaded VPN and it played with VPN. I don't want to save those files on my computer so I would like to transfer it to my external harddrive. When I try to drag it over, it won't let me drop it in. I am new to the MAC world. Is there a way to choose where it will save itself right before you download like there is on windows. I click on it and it does not prompt you, it just starts downloading.
View 8 Replies
View Related
Feb 25, 2012
What's the best way to transfer large files to a fellow Mac user?
Info:iMac, Mac OS X (10.7)
View 12 Replies
View Related
Jun 9, 2009
every time i try to copy a file that is over 6gb to my external drive i get this message "sorry, the operation could not be completed because an unexpected error occurred. (error code 0) how di i fix this error?
View 11 Replies
View Related
May 29, 2012
can data from and external storage device from a windows system be used with a mac?
Info:
MacBook
Pro
View 2 Replies
View Related
May 15, 2009
As the title says, can you combine 2 drives to one large without the expensive raid card?
View 2 Replies
View Related
Jun 28, 2012
I'm trying to transfer pictures to my macbook pro from an SD card.Â
Info:
MacBook Pro
View 2 Replies
View Related
Oct 20, 2009
When I boot up, my external drives are not on the desktop. I discovered that if the Finder is relaunched, they show up and all is well. Another issue that may be related: When powering down, the computer needs a force-quit most of the time. It hangs on the spinning gear
OSX 10.4.11
PowerPC G5 dual 2.7
Finder 10.4.7
2 internal drives
1 LaCie 1TB Raid (formated JBOD)
1 CalDigit 1TB Raid
250 GB External
150 GB External
View 1 Replies
View Related
Apr 10, 2012
my iMac desktop is large and moves when i move my mouse,
Info:
iMac (17-inch 1 GHz), Mac OS X (10.5.8)
View 1 Replies
View Related
Nov 30, 2008
My external drives transfer very slowly on my MacPro. I've been searching for answers and have turned up very little.
Just to make a note, I measured my disk speeds with both AJA System Test and copying files between drives and reading the Disk Activity in Activity Monitor.
I have 3 external drives, all MyBook Premium or Professional, 1x 500GB, 1x 1TB and 2x 1TB in RAID 0. I had them on Firewire 400 and the RAID 0 2TB one on Firewire 800. My transfers on FW were all around 24MB/sec on all drives (much less than what I should be getting with FW400). I then read somewhere that the FW bus on the MacPro uses the slowest speed connected for all FW connections. So I unplugged everything but the FW800 Raid 0 drive and my transfer rate jumped to 40-60MB/sec. This is much better, but still about half or so of what I expect it should be producing from an external RAID 0 setup.
To keep my FW800 backup drive faster, I've plugged the other two into USB2.0. The transfer speeds on both drives are now hideous, around 10-15MB/sec. This is so slow, but I'm not sure what to try to fix my speeds.
The HD's in the external drives are all 7200rpm, and all should be transferring at a higher rate. Do you have any suggestions or ideas? Ideally I'd like to get everything transferring at rates they should be transferring at, but I'll settle with my current FW800 speed of 40-60MB/sec if I can get my other two drives transferring at a non-snail pace.
Is this a common issue? I can't believe I'm the only one plugging multiple external hard drives into their Mac Pro. I hope someone has a fix or solution for this. I'm all ears!
System: Mac Pro (early 2008) Mac OS X (10.5.5) 3.2Ghz 8-core - 16GB Ram - 4x1TB SATA - GeForce 8800GT - Dell 30" 3008WFP A02 - Gateway 21" FPD2185W - 3xMyBook external drives
View 8 Replies
View Related
May 20, 2012
i have tried going to the disk utilities and remounting my external drives and checked for an option in system prefs, but my external drives (both flash drive and hard drive) just won't show up on my desktop. My computer isn't even a week old!
Info:
Mac Pro, Mac OS X (10.7.4)
View 3 Replies
View Related
Jun 18, 2008
I think I have found a bug in Finder where I cannot copy large files from a bus powered USB external. I get this error:
"The Finder cannot complete the operation because some data in "..." could not be read or written (Error code -36)"
I think I have eliminated hardware as an issue:
1. The problem is repeatable (and always happens) on my Intel Macbook Pro, Intel Mac Mini and G4 Mac Mini
2. The problem happens whether I have formatted the external as HFS+ or NTFS (I can't use FAT32 for files over 4GB, e.g. VMWare disk images)
3. I can copy the files off the external with my Windows Vista machine (mostly dormant these days) and an XP laptop (I use for work), using Explorer.
4. The same problem happens with two different external enclosures (An Xtatix Portadrive and a Beyond Micro mobile Disk). I have also tried 3 different 2.5" drives in these enclosures.
5. If I boot my Macbook Pro into Vista using Bootcamp, I CAN successfully copy the files using Explorer.
6. I CAN also copy the files OK if I use Terminal and the 'cp' command (it works for all 3 machines)
7. I have NO problems with large files and Finder if I use a powered external with 3.5" drives via USB or Firewire (HFS+ or NTFS) on any of the Macs.
As you see, I think I've been pretty thorough. It seems as though Finder must be at fault when used with a bus powered USB external.
I should also mention that all 3 of my Macs are on Leopard 10.5.3, though I did also boot a my Intel Mac Mini into Tiger with the same result (Finder failed, 'cp' worked).
I have reported the problem to Apple, but wondered if anyone else has had a similar issue...and hey, a solution would be a great bonus!
View 2 Replies
View Related
Feb 29, 2012
I have a 2011 Macbook Pro and an older (5 year old) Western Digital external hard drive. I have always used this hard drive for both mac and windows. Recently, however, whenever I go to transfer a file from the mac to the WD hard drive, the little transfer window pops up and it appears to initiate the transfer. However, it never fully starts it. It appears to "get stuck" in that initiating stage, showing zero of 3.16 gb transferred and shows an unknown transfer time. This happens no matter how long I leave it open. Again, I have used this external hard drive with my macs for the past 5 years without any problems until now. I haven't moved or modified the WD hard drive
Info:
MacBook, Mac OS X (10.5.5)
View 1 Replies
View Related
Aug 3, 2010
I just switched from a PC. All my backup (files, music, photos, etc) are stored onto a Windows-formatted HDNow i have error when i try to transfer them over
It gives me the error-36did a bit of research but none of the remedy worked (i.e. terminal>dos_clean)I have previously transferred files from the same external HD onto my macbook in which i purchased last year and don't recall having any problems. (although not all the files were transferred onto my macbook, only a few files in which i needed) What can be the alternatives for me to transfer all my files over onto my imac without having the reformat my external HD?
View 2 Replies
View Related
Jun 22, 2012
I have three external harddrives all of which are connected through different ports, all show up in finder, all show up in disk utility, but none of them will show up on my desktop. I looked at a few other posts similar to mine but the answers given to other problems have not worked. There is no way all three of my cords are causing a connection problem and I have repaired and verifyd all the drives and still nothing.
Info:
iMac, Mac OS X (10.7.4)
View 4 Replies
View Related
Nov 8, 2009
I am trying to transfer a large file (~7GB) from my macbook pro to my external drive... but seems that I keep getting an error. If I try to drag and drop from my Mac drive to the folder of my external hard drive I keep getting this message: 'The operation can?t be completed because an unexpected error occurred (error code 0).' I tried to use a UNIX command with the Terminal $mv file.xxx /Volumes/HardDrive/ at first it seemed to work, but after a while I receive this message from the Terminal: 'File too large' I am now frustrated... I need to save this large file for backup purposes and my external hard drive is not big enough to be used for Time Machine (it has 80GB out of 160 of space left)
View 15 Replies
View Related
Mar 7, 2007
I have a 38gb iMovie file on my MacBook. I also have a 160gb external HDD. I want to copy the file across, sounds simple right? It will start copying happily but when it gets to about 8-10gb I get this error message (EVERY TIME!): Sorry, the operation could not be completed because an unexpected error has occurred (Error code -1309). I really do not want to delete this file as it is a wedding video I did for a friend only a few months ago. I am trying to copy across to a Freecom II drive using USB.
View 7 Replies
View Related
Jun 4, 2014
How do I copy files fromone external hard drive to another external hard drive via mac book air
Info:
MacBook Air (13-inch Mid 2013), OS X Mavericks (10.9.3)
View 2 Replies
View Related
Feb 12, 2009
so i have been using pc all my life, but now i have a new macbook and ive been downloading a lot of things. the other day an error popped up and said i was running low on disk space... ive been lazy about "reconfiguring my external hard drive for my mac" like the apple employee told me i needed to do, but i decided i should finally do it to free up space on my computer.
i have a seagate external hard drive and i plugged it into my computer and erased everything on it so i could start using it with time machine. after it started backing everything up an error popped up saying that i only have 2.2 MB available.... so on my system preferences i reconfirmed that it says 2.2 MB of 232.9 GB available. this doesnt make any sense because i just wiped my external drive, plus i didnt have much on it to begin with.
so i guess my question is, how do i make that space available?
also, i mainly wanted to back up all of my documents, music, and movies so that i could delete some movies and documents from my computer that i dont need every day and make space for more, but then when i plug my ext hard drive back in to my computer, wont it just mirror my computer with time machine and defeat the purpose of storing things on it because they will just be deleted?
i know im lame, but im really trying to get used to my mac which i know is way easier than im making it out to be.
View 4 Replies
View Related
Mar 22, 2010
Do I need a special cord to transfer large files from one mac to another? Examples pictures etc... Can I just plug usb between the two and go? I really do not want to burn DVD or transfer to external HD....
View 2 Replies
View Related
Dec 11, 2009
I'm using SL, and these do appear to be hidden files. But they are drives (shared apparently, blue with the people on the drive as the logo) and if I click get info it says under server: file//localhost/home. The "net" drive appears as file//localhost/net. Sharing and permissions says - you can only read. I definitely don't run any servers, just browsing for the most part. I haven't noticed this drive until today.
View 1 Replies
View Related
Jul 13, 2010
I cannot transfer files to or from my Western Digital HD (WD1200D036). I have had this problem for a while and I cannot resolve it. What can I do? I cannot even reset my HD as I cannot move the important files from my HD to my Mac.
View 3 Replies
View Related
Apr 2, 2009
Does anybody know whether there is a way to prevent files, indesign and pdfs specifically, being copied onto an external drive?
View 1 Replies
View Related
May 29, 2012
i´m trying to copy pase videos, pictures and word documents from the hard drive om my iMac to an external drive. I can't because the paste function is gray and not working. I do not understand?
Info:
iMac, iOS 5.1.1
View 1 Replies
View Related
Jun 3, 2012
I'm a relatively new Mac user (Macbook Pro 15). Can anyone tell me hwo to delete files from an external drive WITHOUT having to empty the entire trash bin. I can easily send the files to trash, however this does not free up disk space until I empty the trash. Personally I don't like to empty all the time as it ceases to become an effective safety net.
Info:MacBookPro, Mac OS X (10.7.4)
View 1 Replies
View Related
Apr 1, 2012
I am unable to transfer movies from my External Hard drive to the MacBook. The error code is 36. how to get this sorted out?Â
How do I give change permissions, and give full control?
Info:
MacBook, Mac OS X (10.4.11), Mac OS X Tiger
View 2 Replies
View Related
