every time i try to copy a file that is over 6gb to my external drive i get this message "sorry, the operation could not be completed because an unexpected error occurred. (error code 0) how di i fix this error?
View 11 RepliesI am trying to copy my aperture 3 library (126GB) to an external hard drive to free up space on my local hard drive.
When it is at the final 1gb of the process I recieve an error message:
"The Finder can’t complete the operation because some data in “Aperture 3 Library” can’t be read or written.
(Error code -36)"
I have repaired the aperture library and repaired permissions and this did not work.
I'm running 10.9.3
I think I have found a bug in Finder where I cannot copy large files from a bus powered USB external. I get this error:
"The Finder cannot complete the operation because some data in "..." could not be read or written (Error code -36)"
I think I have eliminated hardware as an issue:
1. The problem is repeatable (and always happens) on my Intel Macbook Pro, Intel Mac Mini and G4 Mac Mini
2. The problem happens whether I have formatted the external as HFS+ or NTFS (I can't use FAT32 for files over 4GB, e.g. VMWare disk images)
3. I can copy the files off the external with my Windows Vista machine (mostly dormant these days) and an XP laptop (I use for work), using Explorer.
4. The same problem happens with two different external enclosures (An Xtatix Portadrive and a Beyond Micro mobile Disk). I have also tried 3 different 2.5" drives in these enclosures.
5. If I boot my Macbook Pro into Vista using Bootcamp, I CAN successfully copy the files using Explorer.
6. I CAN also copy the files OK if I use Terminal and the 'cp' command (it works for all 3 machines)
7. I have NO problems with large files and Finder if I use a powered external with 3.5" drives via USB or Firewire (HFS+ or NTFS) on any of the Macs.
As you see, I think I've been pretty thorough. It seems as though Finder must be at fault when used with a bus powered USB external.
I should also mention that all 3 of my Macs are on Leopard 10.5.3, though I did also boot a my Intel Mac Mini into Tiger with the same result (Finder failed, 'cp' worked).
I have reported the problem to Apple, but wondered if anyone else has had a similar issue...and hey, a solution would be a great bonus!
I have a Western Digital 2TB USB Hard Drive that Ive been using perfectly for a couple of years on my MacBook Pro. A couple of months ago I bought a 27inch iMac and started using it as my main computer. So I had that hard drive connected to my iMac.
I started to notice that during large transfers (be it many files or 1 big one), usually into the Gigs, I suddenly got a warning message saying that the Hard Drive was inappropriately disconnected. It doesnt appear in Disk Utility so I have to manually connect and disconnect the drive in order for it to show up again on the iMac. I tested it again on my MacBook and the same thing happened.
Another problem:
Sometimes it will dissappear from the iMac without a warning message, it just doesnt show up. (Usually after long periods of inactivity). I then have to manually disconnect and connect for it to show up.
Info:
iMac, Mac OS X (10.7.2)
I've bought a Seagate External Hard Drive, and want to copy my photos from the Macbook Pro to it. Every time I try and copy them, a message appears 'Unable to render file for export' followed by the drive details and a string of numbers. How I should be copying them? I've already accidentally deleted and appear to have permanently lost photos from iCloud, which is why I want a spare copy on an external drive.
Info:
MacBook Pro, Photographs
I'm wondering if someone with the latest Time Capsule (announced last week) can post the results of copying a large file (such as your iPhoto library or equivalent - ideally over 500MB) from the HD on your Mac to the HD on the TC over GigE.
Please report the time in seconds for the copy to complete and the size of the file. I'd like to understand if they changed the QoS on transfers to the TC HD.
I've recently purchased a NAS drive and would now like to copy about 500 GB of files onto it. Obviously this is a slow process! Is there a way I can set up the copy so that if it gets interrupted I can resume the transfer? At the moment the I just know X of 100 GB has been transferred. On the destination drive you can't see any of the files being transferred across until the entire operation is complete (on a pc you can normally see the files that have been transferred immediately) ... I'm a bit worried that if I turn my laptop off or I have any network issues the transfer will fail..
View 2 Replies View RelatedI am running 10.6.2 in Late 2008 Alu UMB. I have a Transcend 500 gig external, with NTFS partition of 250 gig. This NTFS partition has .dmg files. Among then, only a few dmg files show up with the usual dmg icon, everything else show up as blank icons, with .dmg extension, as if it were an unknown or unrecognised file. In file info the preview shown is the usual dmg icon and the file size is also right. When i double click, the dmg doesnt mount, infact nothing happens, and when i try to copy it to my internal hard drive, It says "One or more items in xxx.dmg can't be changed because they are in use". So am not able to use those dmg files.
Note: I have enabled native read/write for NTFS by editing the /etc/fstab.
I have a USB 2.0 hard drive that I have been using to back up movie files. It has let me transfer files from my Macbook Pro HD to it hundreds of times without any problems.
I have this .mkv file that keeps giving me an error when I try to transfer it to my external. I get "Sorry, the operation could not be completed because an unexpected error occurred. (Error code 0)".
I have transferred plenty of .mkv files to my external with no problems. All other files work fine when I transfer them. It will let me move my .mkv file around my Macbook Pro's internal hard drive but it won't let me transfer it to the external.
I am trying to create a new image from a DVD and burn it to a new DVD using the MAC Disk Utility "New Image" option. The source DVD is 4 G and my target folder is on my external HD which has 298G.. plenty of space. However, whenever I attempt to SAVE the existing DVD to my external HD, I am getting the error message that the file is too large. I have tried the parameter for "Image Format" of both 'Read Only' and 'DVD/CD Master' and neither of them work. My "Encryption" setting is 'None'.
View 7 Replies View RelatedIs there a size limit for importing an Excel File into Numbers? The error message says the file is too large. Has this been changed in i-work 09? The file has multiple sheets that refer to each other, but i can't even open at this point. It is 3.1 MB.
View 4 Replies View RelatedI am trying to copy the iPhoto library to my newly installed NAS drive. I have 2 libraries (3.6gb and 16.8gb). The smaller one copied across no problem but when copying the second I get an error 36 after it has copied 30mb of data.
I have tried all avenues:
- Restarted iPhoto holding down alt and opt and repairing permissions.
- Rebuilt library using iPhoto Library Manager
But I still get the same message. I have backed up the whole Mac using Superduper to a small external drive and that works fine.Part of the reason I bought the NAS drive was to back up photos, and now it doesn't work!
Also, I do when checking Console I get the following message regularly:
12/05/2012 09:16:22.050 fseventsd: scan_old: bailing out because device mounted @ /Volumes/Buffalo_Cloud has dls 0x0 and dls->fci 0x0
Info:
iMac, Mac OS X (10.7.3)
I have a 24" iMac and it was running fine the other week and now I get this annoying error=36 whenever I try to transfer large files from desktop to my external drives. It goes about 1/4 way with the transfers then stops with the error=36 message. I've tried to reset the pram but it won't let me. It just keeps on restarting to the same gray screen with the single short beep tone over and over until I let go of the option, command, P & R buttons and restarts normally but does not reset the pram.
View 1 Replies View RelatedI'm going to use a fast 300GB WD VelociRaptor HD in an e-SATA enclosure connected to my MBP via a Merax e-SATA Xpress XpressCard/34 for moving large audio file drum software during live play. I know FAT32 wont work because of it's 4gig file limitation and stability issues (file corruption). I could use the more modern and stable NTFS but that would require using something like NTFS-3G or Paragon to allow OSX to recognize it but I'm worried about slower performance going that route. Would using the OSX native HFS+ format give me the performance and large file size usage I need?
View 4 Replies View RelatedI have a full 2TB Lacie drive that i want to copy to back up and store in a safe place. I have a Seagate 2TB drive hooked up (both drives on USB) but it freezes everytime. Sometimes i get almost all the way to the end and sometimes it only gets to 150 GB.
View 1 Replies View RelatedI have 1.9TB on one drive, 645GB on another; I want to copy all that data onto a separate 6TB drive....
What's the fastest way to do this? I have already begun w/ 2 cp -pR commands, running in different Terminal windows, but seem to be getting lower disk activity numbers in Activity Monitor than I was with a brief test of a Finder copy... is that possible?
Any suggestions? Also looking for a (relatively) efficient way to verify the copied data after the fact.
I am having another problem transferring some larger folders from my old MacBook to my new MacBook. I am trying to move some very large folders and individual files from my old Mac to my new Mac, both running the latest Lion. I have tried this with both USB Flash drives and with external hard drives. Whenever I drag and drop from Finder to either the flash drive or the hard drive, the copying begins, but always gets stuck with the pinwheel at almost exactly 4.17GB. At first I thought that the formatting of the flash drive might be the culprit, but it also happens on the external hard drive that is formatted for Apple Extended.
A very "time and effort" intensive workaround is possible if I just copy fewer than 4 GB at a time, which is what I have been resorting to. But this won't allow me to transfer my Windows 7 Parallel virtual machine, since that one file is over 90GB. As additional information, it appears that Time Machine isn't bothered by this limitation, since I can backup and restore these huge files from a backup. Unfortunately, Migration Assistant doesnt seem to permit the granularity of restoring just one file. why the system hangs at 4.17GB of transfer? By the way, this happened with Snow Lion too. It didn't just start with Lion.
Info:
MacBook
Pro, Mac OS X (10.7.2), 15" MBPB, 8G RAM 750GB, 500GB
I recently purchased a Western Digital "My Passport Essential" 160mb external hard drive. When I attempt to transfer "any" type of material (JPEGS, PSD, MP3, MPEG, etc) from my 600 MHz PowerPC G3 (iMac) operating on an OS X, to the external hard drive, the file's "Date Modified" (date and time) "mysteriously" changes to the time at which I'm copying the files. For example, a file that was last saved on July 1, 2008 and then transferred (copied) on February 26, 2009 to the external drive, suddenly appears with a "new" February 26, 2009 saved date.
Because, I've always viewed my files by the "Date Modified" option at the top of the folder, I've relied on my files for its accurate date and times.
I recently bought my first imac. I seem to have an issue about copying movies from my imac to an external hard drive.I try to ''drag and drop'' but nothing is happening.I also tried to copy the movies and then paste them to the hard drive but no luck either.
View 10 Replies View RelatedI want to copy my iTunes library from one external drive (currently connected to an iBook) to a 2nd external drive (connected to an eMac). The library is almost 60GB and so can not fit on either machine's hard drive.
The music currently plays through the iBook from the first external drive.
I want to be able to play the same music on the eMac (through the 2nd external drive).
Which is the best way to go about this?
Should I:
a) Connect the 1st external drive to the eMac and manually drag and drop the music from there to the 2nd external drive, or
b)Use Silverkeeper Basckup and do a backup of the Music folder in the 1st drive to the 2nd drive, after connecting the 1st to the eMac?
or is there not much difference in doing either? Or is there a more efficient option using iTunes?
I am trying to back up all my pictures that are in iphoto to an external hard drive. I just want to copy everything that I have, put them on the external hard drive and move on. How can I do this where I can use these pictures on another computer though if needed? I know that I can move the entire iPhoto library but that wouldn't be compatible on a non-Mac correct?
View 4 Replies View RelatedI have a 250GB WD external hard drive. I formated it in MS-DOD(FAT)/ExFAT using disk utilities.I have problem copying files from MacBookPro to an external hard drive. when i try to copy it says "The Finder can’t complete the operation because some data can’t be read or written (Error code -36) " The info of the files is shown as read & write?
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.6.8)
I recently picked up a USB Hard Disk, I plan on copying large files to it (for example 20gb VMs), I am wondering whether or not finder can copy files as large as 20gb one at a time because the last time I tried to do this on a USB Stick, the file transfer would either freeze or would end up taking way too long to transfer and in the end I had to pull it out and having to reformat it. DOes anyone here know if such things will happen again copying these files?
View 4 Replies View RelatedI'm trying to copy my DVDs. I would like to find the best solution for copying the disk from my internal optical drive to an external optical drive.
View 1 Replies View RelatedI am backing stuff up to an external drive (G-Raid 1TB, if that matters), and the process will randomly stop and not allow me to cancel out the copy process once it does so. I have had multiple problems with many drives (lacie and g-raid) in the past before, on different machines (G5 tower, mac pros, intel imacs, etc) so for some reason in my head I figure it as random. I'm guessing there's a hiccup somewhere.
They're all formatted correctly to handle large files, and I know it's not good, but if it hangs up and I pull power or shut down, it'll unfreeze and remount (about 80% of the time success rate, 20% of the time it wont even show up, not even in disk utility). This also occurs when I am going from external drive to external drive and internal drive to external drive. It seems very random. And finder seems to stall out too (like it is now) and when I try to relaunch it, it will not come back until one of the drives that is causing the problem is disconnected from the computer.
I was just wandering if there is any software that people use for copying large amounts of data, or whether you just drag and drop/copy and paste with Finder?
View 2 Replies View RelatedI am trying to transfer a large file (~7GB) from my macbook pro to my external drive... but seems that I keep getting an error. If I try to drag and drop from my Mac drive to the folder of my external hard drive I keep getting this message: 'The operation can?t be completed because an unexpected error occurred (error code 0).' I tried to use a UNIX command with the Terminal $mv file.xxx /Volumes/HardDrive/ at first it seemed to work, but after a while I receive this message from the Terminal: 'File too large' I am now frustrated... I need to save this large file for backup purposes and my external hard drive is not big enough to be used for Time Machine (it has 80GB out of 160 of space left)
View 15 Replies View RelatedI have a 38gb iMovie file on my MacBook. I also have a 160gb external HDD. I want to copy the file across, sounds simple right? It will start copying happily but when it gets to about 8-10gb I get this error message (EVERY TIME!): Sorry, the operation could not be completed because an unexpected error has occurred (Error code -1309). I really do not want to delete this file as it is a wedding video I did for a friend only a few months ago. I am trying to copy across to a Freecom II drive using USB.
View 7 Replies View RelatedHow do I copy files fromone external hard drive to another external hard drive via mac book air
Info:
MacBook Air (13-inch Mid 2013), OS X Mavericks (10.9.3)
When I was copying my picture folder to external hard drive I stopped it now I dont see my orginal files on my computer. Say hidden files
Info:
MacBook Pro, Mac OS X (10.5.8)
