I installed a new HP Officejet Pro8600. It all is synched, but will not print.I think I need to uninstall the existing HP Photosmart C4480, first. Then reinstall the newer HP Officejet.how to uninstall the existing printer.
Info:
iMac, not sure of the operating system.
I tried to install a Cannon 620 printer. It seemed to go ok, showed up on the printer list when I tried to send a job, but it wouldn't come online and print. I fiddled around (bad idea) and changed the printer sharing parameters, and now whenever I try to go into system preferences, printer/fax, it freezes and I have to force quite. Same with other apps when I try to do something with the printer (like word). I tried to uninstall, but can't get to the driver to uninstall it, as it is in systems preferences. how to uninstall even though I can't get into the system pref printer options?
Info:
MacBook (13-inch Late 2008), iOS 5.0.1
My HP 3210 printer files use PowerPC software. As a result of installing Lion, they have been disabled. What should I do?
Info:
iMac, Mac OS X (10.7.3)
I have OSX 10.6 installed and I currently have my broadband connected by Ethernet connection. Airport seems to connect to my wireless router even though this is plugged in. HPSETUP appears as a device in the WI-FI drop down, however to print I need to select this from the dropdown. Can my iMac's wifi connect to this by default rather than my broadband connection?
View 3 Replies View Relatedthis may be sort of a noob question but I was hoping someone could help me out. I have an HP photosmart 8050 printer hooked up to my iMac via USB. The thing is my girlfriend uses my other 2 dell laptops mainly for school while I use my iMac for school. All of these computers are on the same network and are scattered around my house.
So being in school we need to print out a lot of documentation and wanted to just have the printer setup wirelessly. I have a modem w/ the wired/wireless router, and all my computers have internal wireless cards.
I recently updated my operating system to Mac OS X snow leopard 10.6.8. And now my HP photosmart C5000 series printer will not scan. What can I do?
Info:
Mac OS X (10.6.8)
uninstall a Brother MFC 425N Printer from my PowerMac G5 OS Tiger 10.4.11.
View 1 Replies View RelatedI have just installed OS X 10.6.8 Now my printer (HP psc 2410 Photosmart won't work. I went to HP site to get a new driver, but they have none for this OS. Now what do I do?
Info:
iMac (20-inch Early 2008), Mac OS X (10.6.8)
My macbook pro doesn't shutdown after installing kaspersky and uninstalling it.
Info:
iPhone 4, iOS 5
I have a HP Photosmart C4200 Series (C4280 to be exact). I have recently installed Snow Leopard (was using Leopard before) and this printer shows as supported in Snow Leopard.The problem I'm having, is that when I go to print a document from Microsoft Word (Office 2008) for Mac, all I get are blank pages. I printed something from Text Edit and it comes out fine, but files from Microsoft Word come out blank. Also, the "Test" pages come out fine as well.
I have been printing files for months and months now from Microsoft Word, but this is the first time I have tried in Snow Leopard.Does anyone know what is going on? I really need to print stuff since its for school.
Ever since I moved to Lion my Hp Photosmart All-In-One Printer Scanner Copier no longer scans or copies.
Info:
MacBook Pro, Mac OS X (10.7.4)
I installed (and subsequently uninstalled) two different fan control programs... Since then, my fan speed has increased somewhat dramatically. Instead of the normal 2000 rpm (approx), it now runs at 3500 to 4500 rpm with CPU temps between 55 & 65 deg. C. I'm wondering if one of the programs modified some fan setting and how I can restore the factory defaults. I'm on a Macbook Pro OSX 10.6.8 *additional note: I only have one fan running (left fan), which is why I downloaded the fan control programs in the first place... but the left fan was running at around 2000 rpm even though it was the only fan (until I installed those programs)
Info:
MacBook Pro, Mac OS X (10.6.8)
I'm currently running BootCamp with Vista, but I'm getting tired of rebooting. If I install Parallel would I have to reinstall Vista again, or can I use my current partition?
View 20 Replies View RelatedI have a HP Photosmart B110 printer/scanner and I'm running OSX 10.7 Lion, I have no dramas printing but the scanner is not recognised.If I go to System preferences> Print & Scan, it shows the printer but won't show the scanner!! I obviously want and need to use the scanner but am unable!
Info:
MacBook Pro, Mac OS X (10.7.3)
I have a 13 inch Aluminum Late 2008 MacBook. Processor 2 GHz Intel Core 2 Duo, Memory 4 GB 1067 MHz DDR3, Software Mac OS X Lion 10.7.4 (11E53). Currently I have a 160 GB SATA disk as my hard drive a d 4 GB of memory. (Is it time to upgrade or what?) I recently bought a Western Digital 1 TB internal hard drive to replace my exisiting internal hard drive. I spent a lot of time last night trying to first- connect this new hard drive to my computer so that I can then clone the existing hard drive and then hoping that I would get that done so I could install the new hard drive. No such luck.Â
My current hard drive is partitioned as follows:Â
Name:Â Macintosh HD
Format: Mac OS Extended (journaled)
Size: 132.5 GBÂ
Name:Â BOOTCAMP
Format: Windows NT File System (NTFS)
Size: 26.69 GBÂ
When I was partitioning the new drive I did so as follows:Â
Name: Macintosh HD
Format: Mac OS Extended (Journaled)
Size: 973.51 GBÂ
Name:Â BOOTCAMP
Format: MS-DOS (FAT) --- This was the only option that I was given that I thought would work. I did not have the option of "Windows NT File System (NTFS) to choose from. Question # 1: is that going to be a problem? I only run 1 program on Windows and that is the only reason I have BOOTCAMP on there at all. However, I do HAVE to have that program. Like I said it didn't give me the option to choose Windows so I didn't know where to go with this. Any help with that would be awesome.
Size: 26.34 GB (I just used the same size that was current, or close to it.) I connected the Western Digital 1 TB through an external device, partitioned it as stated above, and then used Carbon Copy Cloner to clone the drives. The first one went through fine. (It took 2 hours and I went to bed before it finished.) This morning I woke to see that it had gone through well. I then started the process with the BOOTCAMP drives. However, before I started it gave me errors stating that I wouldn't be able to run Windows off of the Cloned BOOTCAMP drive. Question #2: Is it because of the Format type I chose when partitioning?
Info:
MacBook (13-inch Aluminum Late 2008), Mac OS X (10.7.3)
my current HW configuration is the following:iMac Intel 21" Lion (latest update)modem router Asus DSL-N10HP Photosmart 5510 all-in-one..My problem is that my Mac can not 'see' the Photosmart in wifi mode and hence can not configure it as default printing and scanning device.The iMac can 'see' the router and so does the printer.What's more, I can open the HP configuration panel by typing its IP address in Safari (and this in wifi mode).Needless to say, both OSX and the HP drivers are at thier latest update.
Info:
iMac, Mac OS X (10.7.4)
after updating to Maverick osx 10.9.3 my hp photosmart scanner is not recognized with IMAC image capture. I have done all software upgrades and deleted the printer and reinstalled the printer which is on my wireless network.
View 5 Replies View RelatedMy HPphotosmart 6520 won't print using my IMAC.
Info:
iMac
Yesterday I purchased my first ever iMac (OS X 10.9.4 - Mavericks I believe).Â
I'm trying to connect my HP Photosmart C7280 printer to work wirelessly but can't seem to work out how to do it.Â
When I connect via a USB the printer is recognised in Printers & Scanners, when I remove the USB the printer disappears.Â
My Mac and printer are both connected to the same wireless network (which we get through Virgin Media) - although my printer displays "no link" for IP address, don't know if this is relevant.Â
I have tried resetting print system, I have downloaded all Apple system updates, I have downloaded the latest driver I could find from the HP site (although this might have been unnecessary).Â
One factor that may be significant is that when I view the printer details (when connected via USB) I see the Mac's name, the printer model and the status but I don't see any reference to a Driver, which from what I've read, I feel I should be seeing.
I've also read reference to clicking "use" in a drop-down menu but from the details I see in the printer pane/dialogue box? I cannot see "use" anywhere or any other drop-down menus.Â
by the way, the printer always worked perfectly well wirelessly when connected to a Windows laptop on the same network,Â
Info:
iMac, OS X Mavericks (10.9.4)
The Magic Mouse that shipped with my 27" iMac is more novelty than novel. While it is fine for browing the wen, etc... it sucks for professional use and for gaming.
I want to ditch it and use a standard old 3-button usb mouse. Is there a way to uninstall or disable the Magic Mouse capabilities?
When I want to get mountain Lion, apple store telles me that I have Maverick installed. How can I charge the M Lion version to install on an external drive?
View 1 Replies View RelatedI am trying to install an HP Laserjet 5100 printer onto my Mac (10.5.6) with little success. I have downloaded the driver and when I double click on the .dmg file, I go through the steps and install it. It says it is correctly installed. Yet, I cannot see it when I try to print something.
What am I doing wrong? Where can I go?
I have an printer. I connected this printer with USB to a computer with windows XP. I shared this printer in a network. When I acces it from another windows PC, it works fine. However when I try to use it from my mac (OS X 10.5.8) it does not work. I can find the printer on the network (System preferences-> Print and Fax -> + -> Windows -> select printer). (Note, I'm dutch, so I translated the names, I hope it is clear).
Now here the problem starts:
When I select the printer, I have to choose (Print according and here I can select various kinds of printer drivers. But the Epson stylus pro 4000 is not in the list! So I did have a look on the internet and found that this printer cannot work full functionally at OS X 10.5.x. However there was a 3.09 version which allowed some limited use. So I did download this file and installed it. But what do I have to do now? The driver still is not in the driver list in the add printer menu.
On my HP printer Officejet4620 I get an error message "waiting for printer to become available".Â
Info:
Imac with Intel Core Duo, Mac OS X (10.4.11), 512 MB memory 160GB
I am having a problem installing a printer on XP within parallels. I am using the bonjour setup wizard to install the printer. When I use the setup, I am able to see the printer and go through the necessary steps to set it up. When I choose to finish the install windows tells me I don't have permission to install the printer.
How do I change the permissions so I can install the printer?
I simply plugged in my HP C4180 All in One after starting up my MAC. It was installed in seconds. I can printer without a problem. My problem is the scan feature. When calling up scan from the actual printer, it does NOT give an option to scan to a file. I have no installation disk for MAC so I'm at a stand still.
View 2 Replies View RelatedI have an Epson stylus pro 4000 printer. I connected this printer with USB to a computer with windows XP. I shared this printer in a network. When I acces it from another windows PC, it works fine. However when I try to use it from my mac (OS X 10.5.8) it does not work. I can find the printer on the network (System preferences-> Print and Fax -> + -> Windows -> select printer). (Note, I'm dutch, so I translated the names, I hope it is clear).
Now here the problem starts:
When I select the printer, I have to choose (Print according and here I can select various printer drivers. But the Epson stylus pro 4000 is not in the list! So I did have a look on the internet and found that this printer cannot work full functionally at OS X 10.5.x. However there was a 3.09 version which allowed some limited use. So I did download this file and installed it. But what do I have to do now? The driver still is not in the driver list in the add printer menu.
Apple Genius Bar installed Mavericks on my Mac and I transferred information from the back-up, but now the Canon MP640 is not linked. Have not ben able to achieve this - the instruction is to go to Canon for latest software. Have downloaded what I believe is the appropriate software, but still cannot make the connection.
Info:
iMac, OS X Mavericks (10.9.4)
I have a mac book with my itunes account on it and the machine is also sync with my iphone. I need to return my laptop to my friend and have bounght a new Imac. Can I set up my existing itunes account with my new imac? I'm not too worried about transferring the files I can reload those later but I wanted to avoid setting up another account as it's already sync with my iphone. is that possible? or do I set up a new account on my Imac and then how do I put this on my phone?Â
View 2 Replies View RelatedON my PowerBook G4/OS X.4 (Tiger) the Canon printer MP980 connected wirelessly to my home network (Airport) worked just fine. Now I have installed Leopard and everything was lost. Reinstalled the printer, drivers. The Mac recognizes the printer, the printer shows in the printer list but when I attempt to print, I get a message: "The printer is off-line".
View 3 Replies View Related