On my HP printer Officejet4620 I get an error message "waiting for printer to become available".
Info:
Imac with Intel Core Duo, Mac OS X (10.4.11), 512 MB memory 160GB
I purchased a new hp Officejet 4620 wireless printer about 10 days ago. I followed the directions with installing it and it worked great. I did not use it until yesterday. I was not able to print from the wireless printer. How do I correct this issue?
Info:
iMac, Mac OS X (10.7.3)
I'm trying to print a .psd image from Photoshop CS5 using my Epson Photo Stylus 2400 printer. Yesterday, I downloaded a suggested upgrade and it hasn't worked since then. I used Time Machine and replaced the Epson utility with the old one. I then get a message:
Waiting for printer to become available... and nothing happens. I need to be able to print!
I'm using Snow Leopard 10.6.8
Info:
iMac intel processor, Mac OS X (10.6.8), see above
I have a MacBook Pro running on OS X 10.10.1 Yosemite. I installed a HP Officejet 4620 connected through WLAN, the printer works but cannot make the scanner work. I installed the printer connecting via WLAN. The system automatically downloaded the right driver set.
Later I installed the HP device driver downloaded from HP. After rebooting network, printer and PC the scanner worked.The fun was short lived. Three days later I could not scan. I get following error message:Scanner reported an error..HP Officejet 4620 series is currently unavailable. Please check if it is turned on and connected, or try again later.
Of course the printer is turned on and it is connected to the WLAN. I rebooted network, printer and PC. Still does not work.According the the Apple support page the printer is supported on OS X 10.10. On the HP support pages it is not listed.which printer/scanner product works reliable with OS X even after a release update.
Info:
OS X Yosemite (10.10.1)
Yesterday I could print to my Brother MFC-665CW via my wireless network. Today, without making any changes I cannot. I got the printer to print out the network configurations and they seem fine. My partner's PC can still print to it without problems.
But the mac (Powerbook G4 running OSX 10.4.11) can no longer see the printer. I tried re-adding the printer using the Print Utility. I got an error message -50. I tried reinstalling the driver and firmware.
Live functioning printer (Epson Stylist 9400FAX) stopped working with the error message
" Stopped – 'Filter' failed, 1 page" in the queue.
Info:
iMac, OS X Mavericks (10.9.4), iMAC3.2Ghz Core I5 24Gb RAM 3Gb F
We just purchased a HP Officejet 6500 Wireless printer for our home and currently have one desktop, and 2 laptops running windows xp. These machines have no problems connecting to the wireless printer. My G4 PB running 10.4.11 on the other hand has issues. The software says it is compatible with my Mac setup. I run through the HP Starter CD and install all drivers, when the installation is complete it says everything went fine. I have the printer installed and can choose to print with it. But when I do, I get the following. I have deleted and reinstalled a couple of times with out any success. Sorry for the huge photo, but it was kind of necessary to see everything, and I wasn't sure how to make it so you can click on it and enlarge.
View 2 Replies View RelatedHow do I set up an HP Officejet Pro 8500A Plus Wi-fi printer on my macbook air? I went to settings, then print and scan, and found my printer. Clicked on it to set it up and it's been configuring for over 20 minutes with no end in sight.
Info:
MacBook Air
I have been given an iMac g3 with osx 10.4.11 installed and airport card. My son will have this as his first computer. It is up and running and surfing the net using the airport connected to our home network. I have searched the forums and tried all the results I could find but am still unable to print from the iMac to my network printer.
iMac G3 10.4.11 osx slot loaded, airport wireless. Officejet all in one 6310 usb to pc running Vista. I have tried all the usual SAMBA and LPD methods listed going for generic printer, but get error 256 using printer utility, and NT_status_no_memory when using samba with all the settings, when trying LPD the printer service just stops.
I use LPD://user:password@workgroup/server/sharename and same for smb. I have set up a seperate account for the mac on the vista pc with password and started lpd service I've also edited the registry for lmcompatibility, printer sharing is enabled and both machines have the same workgroup name (WORKGROUP).
message: Incompatible printer. The Connected printer cannot be used. The Canon LBP3100 is connected via USB and registered on the system detailsI have installed the latest driver from canon.
Info:
Mac mini (Mid 2011), Mac OS X (10.7.3)
when i install printer in mac os x then a message apper that is "error reading segment header"1008:3,-38please give me solution of this message and how can i install printer in mac.
View 1 Replies View RelatedI have an HP OfficeJet Pro 8630 printer - when I hit "Control P" my printer goes offline - how can I correct that and prevent it from continuing?
Info:
MacBook Air (13-inch Mid 2013)
My printer stopped working.. I keep getting message saying " broken pipe"...
Info:
iMac, Mac OS X (10.7.3)
Got a iMac running OS 10.6, and am wanting to print from a Samsung ML-1710P printer connected via serial port to a XP PC. Everything seems to all be communicating with each other, except I eventually get a print error on the XP machine in the print manager. Can anyone help with this?
Notes:
- the computer and printer can be seen by the mac.
- when a print job is sent, the mac spools and sends it "ok"
- the XP print manager status changes to "printing" then after about 1 min changes to an error.
- the latest driver for that printer is installed on the XP machine.
- I have tried to use the Generic Postscript Printer driver, the Generic PCL Laser Printer driver and an old Mac OS10.3 driver from the Mac end. There are no newer drivers available. I have shared this successfully printer before, but only from another windows machine.
How do I delete an old printer from the Detected Printer List?
Info:
iMac, Mac OS X (10.6.8), early 2009 model imac 20 inch
Printer won't print, printer queue won't open?
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
I can not print from my iMac because I have not been able to install my printer to it. i follow all the required steps and my iMac does not discover my lexmark printer which is already connected to my wifi. I already restarted the printer along with the iMac and still it does not discover it.
Info:
iMac
I have iMac connected to a MBP 13 by ethernet cable. Both Mac have 10.10.1
The MBP prints via USB cable to an Epson printer and the printing works well.
But the Printer sharing in the second Mac is not working as seen here:
This is the Printers and Scanners control panel
[URL]
and this is the Printer sharing which is unable to find the printer inside the iMac, even though it is there as shown in the former picture:
[URL]
Info:
MacBook Pro, OS X Yosemite (10.10.1), MBP 13 mid 2010
My Mac and HP wireless printer have stopped communicating. My Mac says the printer is not connected to the network but the printer says it is. I am running 10.9.4 on my Mac. They worked fine for 3 years then they just stopped. I have reset everything on the printer and gone through all the wireless checks on my Mac. The only thing I have seen is one screen said the address was wrong, but that does not make sense since they work in the same network.
Info:
IMac, Mac OS X (10.6.2)
I have moved an Early 2008 iMac with an Intel Core2 Duo 2.4 GHz processor and OS X version 10.9.3 to a summer home where I have an HP psc 2410 photosmart all-in-one Printer. I have attempted to load the driver for this printer using System Preferences/ Printers and faxes. When I select the + I find my psc 2400 printer listed when I select add I get the message: Some of the software for the printer is missing. You may have to reinstall the software to be able to successfully print. There is the option to continue. Selecting this button I get the message: The software for the printer was installed incorrectly. Please reinstall the software from the manufacturer. This printer was purchased when I had a Mac with a power PC chip and OS X version 10.4.1 which can not be loaded into the current computer. Is there a way to load the driver software that seems to be missing?
View 11 Replies View RelatedMy epson workforce 845 printer stopped printing. When I go to print it says printer in use. I have uninstalled and reinstalled the drivers. I still have error.
View 1 Replies View RelatedMy printer won't stop printing in duplex mode. I have disabled all duplex settings and it's still printing double sided.
Info:
iMac, OS X Mavericks (10.9.1)
I have set up a network (wired) printer and can see it (e.g., ink levels) if i go to system preferences and click on printers, but when I try to print all I get is a message that it won't connect to printer ... when I do setup it has no problem finding the printer and drivers
Info:
MacBook
Pro, Mac OS X (10.6.8)
My Wifi printer is definitely connected to my Network but when I try to connect it to my iMac using the System Preferences it does not show in the available printers window. How to get connected? Just changed to BT Infinity and installed the McAfee Security package could this be the cause?
View 3 Replies View RelatedCan no longer print to my laser printer. Getting message: Unable to send PAP tickle request: undefined error: 0.
Info:
iMac, OS X Mountain Lion (10.8.5), HP Laser Jet 5000N printer
I have MacBook (10.5.8) connected to a wireless router. My printer also connected there. When printing via USB - it is OK when printing via WiFi - I am getting the message in printer queue: printer is currently offline.
View 15 Replies View RelatedAfter pressing the iPhoto icon, the software seems to be turning on but later an error message appears and I am unable to access iPhoto. I tried moving the .plist for iPhoto to Trash but this did not work.
Info:
iMac, Mac OS X (10.7)
The message-printer is offline" keeps showing when I try to print.
Info:
MacBook Pro, Mac OS X (10.7.4)
Error message when I try to print: unsupported document-format"application/vnd.cups-command". I recently had my hard drive replaced in my early 2010 21" iMac.
View 7 Replies View RelatedI've seen previous discussions regarding problems installing a Dell printer. I have a Dell 962 wireless printer. I did find the compatible Mac driver R92834 and I did install the driver. However, when I try to add the printer, I can't find the printer in the drop down list. Am I supposed to be looking for a Lexmark printer? If so, I have no idea what model is equivalent to the Dell 962 AIO. The model sticker is 4409-0d1. A search for this model returns nothing. I'm a newbie with Macs. OS is 10.4.3. Got any ideas?
