I just got my iMac yesterday, and its been awesome, but I have one question. The classic "bong" sound at startup, I know that is the result of a successful POST, but mine didn't do one after the 1st startup. I had speakers plugged in to it when I started up the 2nd time, and no sound. I unplugged the speakers, and I got the sound. Is that normal or do I need to contact Apple? I jut want to make sure nothings wrong with my iMac. I checked the POST results in System Profiler and it said Passed.
I have a Mac Pro 2x 2.66GHz Dual-Core (4 Cores) Xeon 5150 (Early 2006).The internal speaker chimes when I start up even though I have external speakers connected to the analog output on the back.
I have just ordered a Macbook Air. I have an external monitor that has speakers seperate. If I use a minidisplay port to hdmi adaptor to connect to the monitor, will the sound be able to be played out of the speakers of the Air? If not, can I connect an audio jack and have it play through the seperate speakers?Â
I searched the archives and I can't believe no one has mentioned this yet! This is a huge problem on both my Rev A and my new Rev B. When you connect an external monitor and external speakers using the headphone output, there is a high frequency ringing sound coming out of the speakers. I've managed to live with it by turning the treble to minimum and keeping the volume low enough but at the expense of sound quality. The strange part is, if you disconnect the monitor, the ringing sound stops. The problem only occurs if you have speakers and monitor plugged in at the same time. I've tried this on my Samsung monitor, my SONY TV, and my Panasonic audio receiver. The problem occurs with both Rev A and Rev B while my white MacBook and 2007 MacBook Pro all sound fine.
so i love my new 27"; it's simply fantastic.... so far. i encountered a problem when i plugged in a 1/8 to RCA to go to my surround sound system. There is a loud humming sound coming from the speakers when i connect it. i tried to wiggle it and push it further to no avail. the sound was still there. i tried using another cable and the sound was still there. then i tried plugging in my headphones, and they WORK FINE! what the hell is going on and how do i fix this problem?
does anyone who has the 24in iMac have any problem with the sound from the speakers? Sometimes when I listen to music on iTunes I will then get a screeching sound for a few seconds then it will go off.
I hope I'm not double posting. Have any of the other new iMac owners experienced weird frequencies coming from external speakers that are connected to their iMacs?
For example: I have a set of studio monitors that are hooked up to my iMac using a firewire audio interface. Whenever I'm copying data I get an extremely high-pitched frequency coming from my speakers that sounds like my hard drive spinning. Also, whenever I'm scrolling or moving the magic mouse I get a loud buzzing coming from the speakers (especially when scrolling). None of this stuff happened with my previous 20" iMac C2D. I have experienced this issue with all three of the 27" iMacs that I have gone through thus far (due to the yellow tint issue). Does this sound like something I'm just going to have to live with. All of these high pitched frequencies are driving me batty!
After re-arranging my set-up, I suddenly have no sound from my external speakers (JBL Creature II). After the first panic, I figured I would try with my MBP. Odly, they work just fine with that. Then i tried with my headphones from my iPhone - no sound at alle. I?ve resetted PR-RAM (twice), and is now stocked - and pissed.
I know that there's a headphone output jack and an audio input jack on the iMac. Is there anyway to hook up my 5.1 Logitech speakers to the iMac? What kind of adapter would I need or is it even possible?
I'm trying to connect an XLogic speaker system to an IMac desktop. There are only RCA Plugs on the speakers and the 3.5mm plug on the Mac. Can anyone suggest what cable or junction I will need to achieve my goal of connection.
I have several speakers (Logitech) which I had hooked up to my PC with three cables, black, pink, green...the Mac Mini only has one plus for Audio...what do I do to get sound out of these speakers all at once?
I just hooked up my logitech speakers to my IMac and they don't sound as good as they did on my pc. On my pc there was some settings that were the Realtek that had a bunch of audio options that made it sound much better. Is there anything like that for a mac? I can't find anything like that in the apple menu settings.
Im looking to get an imac and some speakers. Im coming from a pc computer with build in speakers in the monitor and they sound horrible, so im guessing the imac wont be much different. So what are some good speakers I could get for 100 bucks?
I have my stereo plugged into the headphone jack but would like the sound to also come from the internal speakers when the stereo is off without unplugging the jack in back.I tried going to the sound control panel but it only lists the headphone jack. Is there a way to do this?
I was reluctant to update my 27inch i5 iMac with the new graphics card firmware update since I wasn't having any flickering issues. I finally caved in and did it thinking that nothing bad will happen, well of course something did. Ever since I updated it yesterday my computer makes a distinct and random popping sound from the speakers, it is soft but audible in my quiet room when I am working and it is driving me crazy.
I have a 24" aluminum iMac G5. I have never had a problem with sound before, and feel like this problem is isolated to a certain DVD but the DVD works on EVERY other player I own. Everything pretty much plays DVDs, so that's many!
So here's my problem: There's parts of this movie that have very high pitched sounds, like electronic sounds that are just sound effects in the movie. Whenever I get to those parts in this movie (maybe even other movies for all I know, I don't play many) and the sound goes quiet, like the speakers can't handle that high pitched sound.
I feel there must be something I can do about it, right? I just use the regular default DVD player application that pops up when I put a DVD in. I tried playing with that equalizer but nothing changed.
Speakers work but cannot get any sound output. Running windows 7 on Intel iMac. Speakers sound on booting and graphics in Control panel and on toolbar indicate sound is being recieved but nothing comes out of speakers or headphones.
I am new to macs and recently purchased an imac. My problem is when I connect a usb device such as my iphone or camera there is no sound played signifying that it is connected. I am used to using windows where a noticeable tune it played everytime a device is connected or disconnected. I have tried looking in setting and such without much luck. Is there anywhere else that can turn this feature on??
I have an iMac 27 and I want to connect it to a HDTV samsung 46 full HD. I have conected from displayport to HDMI and i get the screen. But at the same time I have connected a 3,5 minijack from the computer to the RCA audio in of the TV but I dont get sound. I have checked the config of the TV and I dont find any place to activate it. Then, talking about the screen. I have few questions.
How can I stop the screen on the iMac and work only with the HDTV?
How can I config that the windows on the tv have bigger letters while they keep on the same way on the i Mac's screen?
The tv is kind of far away and is difficult to see the letters.
I was using it for a long time StartupSoundPrefPane11b3 with no problems, but this week I had to erase my hd and restore the disk from time machine. Since then I can't use anymore your program, I checked the boxes "Turn on startup volume control" and "Mute" and turn on the lock. After turn off and on again I get the startup sound. I went to system preferences, and "Startup Sound" program but the "Mute" checkbox is not active anymore. I'm running on a Mid 2007 iMac with 10.7.3 Lion software.
I'm pretty new here, though I posted over a year ago here with a few questions as a beginning switcher. My switch completed in Christmas of 2005 with a late '05 Power Mac G5 Dual-Core 2.3GHz with 1GB RAM and 250GB HDD. I decided to get another monitor and it is a Sony 19" LCD one. I also didn't get any speakers since I used headphones a lot at the time. I recently decided to start using speakers. So temporarily, I am using the Altec Lansing BX1120 2.0 Stereo speakers from Walmart for only $15. They sound great but I would like 5.1 surround sound to watch my DVDs (and to soon upgrade to BluRay & SACD/DVD-A; but that's for another thread later on). Before I go on, I would like to ask questions and provide facts with what my 'puter has. My specific products I'm looking for is at the bottom of this message.
I have a 24" aluminum iMac G5. I have never had a problem with sound before, and feel like this problem is isolated to a certain DVD but the DVD works on EVERY other player I own. Everything pretty much plays DVDs, so that's many!
So here's my problem: There's parts of this movie that have very high pitched sounds, like electronic sounds that are just sound effects in the movie. Whenever I get to those parts in this movie (maybe even other movies for all I know, I don't play many) and the sound goes quiet, like the speakers can't handle that high pitched sound.
I feel there must be something I can do about it, right? I just use the regular default DVD player application that pops up when I put a DVD in. I tried playing with that equalizer but nothing changed. Any ideas...?
For reasons unknown the internal sound option has disappeared from my MBA. The little speaker icon on the menu bar is grayed out and nothing comes from the jack. Internal speakers don't even show up as an option under sound output. I do use an Airport Express for external speakers but it's been playing happily with the internal speakers for months.
the external speakers (and the earphones) I use for my i-mac suddenly stopped playing sound from my imac. They do work though when I plug them to the i-pod. My imac speakers work perfectly. Any ideas what's happening?
Just got my 15 LED SR Macbook Pro. When I plug my bose speakers in at my desk and listen to itunes, I am getting a static pop sound. Should I take it back or is it fixable? By the way, LG panel and no yellow 1/3 of screen. Initially thought it was yellow, but I calibrated it, and now it only looks yellow if viewed from the side. Head on, white. One thing I have noticed, when I watch movies on it in the dark with the brightness turned down (cause this thing is a torch), I am getting quick flashes when a screen has high contrast light and dark. I am very sensative to LCD flat panel TVs that use a colorwheel. Like a JVC dilila, I see rainbows! Is that normal for an led flat panel to see "quick white flashes of light"?
Okay, So i have my Unibody Macbook Pro (late 2009) hooked up to external speakers (RCA Home Theater system with a standard audio cable). Everything works fine and there is no buzz or sound except for the music of course until I plug my printer in. I know the obvious solution is to unplug the printer when listening to music but the printer is shared and other people print off of it etc. and I was wondering if anyone knew why this happens.
My new 25" HP 2510i monitor arrived today, all is good except from the speaker system, I can either have the iMac's built in speakers used or the built in monitor speakers used. Is it possible to combine them both and use both?
The monitor's audio interface connects to my iMac via the headphone jack on the back of the system.
I have the Mac Pro and I have an external hard drive that I connect via the front FireWire panel on the Mac Pro. When the drive is off and the FireWire cable is connected to the computer, I get a "buzz" in the speakers. When I turn on the drive or disconnect the cable, the buzzing is gone? Any ideas?
