IMac :: How Can I Boot From The Upgrade Disk Inside XP?
Oct 22, 2010
So I have XP installed on my 27" iMac, and that's is cool news. I also have a windows 7 professional upgrade disk, that bootcamp won't recognize. I would just blow away that partition and put 7 on. I don't care for any of my data on the XP install, I just want to get 7 on there with an upgrade disk.
How can I boot from the upgrade disk inside XP? Or is there another way?
If I try and install from inside XP it tells me it can only be done (configuration sets) from Windows PE (Preinstall enviroment)
as in I need to be booted from the disk.
How do I accomplish this? I also have a 2009 late iMac, which means that the video drivers don't work out correctly, but I already remedied that with making the video driver usb drive that fixes the issue. I just need to figure out how to get to the point to install.
My computer had 1GB of RAM, so I just bought a 2GB RAM card. When I installed both cards together i can hear the hard drive start up and then nothing, no boot up, just a black screen and the "sleep" light is just solid. I know both cards are fine because I tested each by themselves and they both started up and worked well, its only when they are both in at the same time does it do this. also both slots work because i tested both of them! I tried to do the PRAM reset and it doesnt work, and I tried to do it with one card in and then reset and then shutdown and install the 2nd card and still nothing. Please give me some advice, i am soooo frustrated!!
Just bought a fantastic condition deep-blue 500 MHz G3 DV iMac yesterday for 15. Steal! The original hard drive was knackered so I've replaced it with an 80gb 5400RPM one which should be more than adequate. I'm aiming to get OS X on it. My 350 MHz G3 runs is well, so this should scream. Unfortunately, OS9.0 and OS9.1 disks in the optical drive still produce a flashing folder icon. I need to boot OS9.0 in order to flash the iMac's firmware before I can stick OS X on it, but it just won't boot at all. I'm thinking it could possibly be a knackered optical drive, but before I go to the trouble of finding a workaround, I wondered if anybody here might have some ideas.
My PowerMac thinks the optical drive is open. No matter what I do, I cannot get the disk inside to load and I cannot open the drive to get it out. I'v tried f12 several times and have eject in my menu bar.
Info: PowerMac, Mac OS X (10.5.8), MDD: G4 single, 2 GB Ram, 160 GB HD
I just want to let you know that I am really thankful for your help.
This is a 3-year old iMac version 10.4.11 I upgraded Safari as recommended a few days ago, and since then, Safari has not worked at all. At the same time, I was warned that my startup disk was full. Following the advice from some other mac help sites, I cleared the copies of my iTunes library to free space. I now have 6.72 Gigs of free space on my hard drive, but my computer is still running super slow. Just about every other thing I click on in Firefox gives me the rainbow wheel. I ran Techtools and everything passed but the Directory Scan and Volume Structure.
As soon as a friend can loan me a hard drive, I was planning on backing up everything and re-installing. Is this the best thing to do, or is there something else to try first?
I have a mid-2009 13" MacBook Pro that's having a strange problem. It crashed hard last night while I was typing something- just froze solid, couldn't force quit, then the mouse pointer stopped. Shut it down with the power button, started it again, got the "not permitted" symbol (circle with a line through it). Restarted with my Tiger emergency USB boot drive and the hard drive didn't show up in Disk Utility. Whoa! Restarted with a Cmd - Opt - P - R, no change.
I pulled the hard drive and put it in an external enclosure that I have. It mounted just fine on my iMac so I backed up all of my data, then plugged the drive in to the MacBook to see what would happen-and behold the MacBook booted just fine with the drive attached in the external enclosure! It worked perfectly! At this point, I had no drive installed in the MacBook, the MacBook's hard drive was attached via an external USB enclosure, and I booted the machine via the Lion USB rescue utility. I ran Disk Utility thinking that it would have all sorts of errors to report, but the partition showed no problems. I repaired permissions for good measures, then put the drive back in to the MacBook. Again, I got the "not permitted" symbol.
I tried booting from the USB rescue drive- when I went to Disk Utility the drive showed up but the system hanged when I selected it. I restarted with the Snow Leopard DVD inserted but it froze before loading the setup process (I assume when it was trying to mount a file system from the HD).
I run Windows 7 in a Boot Camp config on this machine as well, so just for fun I tried to start from the Windows partition. To my surprise, it booted just fine from Windows. On top of that, once in Windows I had no trouble accessing the Mac partition.
I decided at that point that maybe something had gone awry that I couldn't see and that I should repartition the drive. I put it back in the external enclosure, booted the MacBook from the Snow Leopard DVD, used Disk Utility to repartition the drive, put it BACK in the MacBook and tried to boot from the Snow Leopard disc again- and it crashed in the same place. I rebooted from the Lion rescue drive and tried to use Disk Utility to check the drive- DU crashed when I selected the hard drive.
As a last-ditch effort, I swapped out the RAM and tried again. No go. At this point, I'm really hoping it's a problem with the hard drive, but seeing as though it works great from an external enclosure, I don't know what to think. I don't have any other 2.5" SATA drives to test in the machine so I have to assume that other than a failed SATA controller, firmware, or other logic board problem, it must be the drive, right?
Info: MacBook Pro (13-inch Mid 2009), Mac OS X (10.7.3), 4 GB RAM, 160 GB Hitachi HD
Well this is an ongoing saga with my iMac. Looks like my third hard drive has gone south after 4 years. All Seagate Barracuda drives. But now I can not even boot from the the snow leopard dvd to at least run the disk utility. I tried the following: holding down 'c' and nothing, hold down options and I get the mouse cursor but nothing else.
I just bought an 800 MHz iMac G4 , and whenever I try to boot into target disk mode it shuts itself down. I am connecting to an intel iMac, and the g4 has no OS installed on it (I am trying to install tiger using my dvd install dvd, the one with the black background and grey x which the G4 won't read). Does anyone know what could be causing this issue? I've already tried reseting the PMU and PRAM.
i have read various threads about this but can't find a cure, here is what's happening:
1) Was running disk utility and said i have a corrupted disk 2) OSX runs fine but i can't reboot into startup disk in order to repair disk 3) Can only boot into OSX now by holding down Option key and selecting OSX 4) Can't use this method to boot into install disk or external drive.
Remedies, I have done the following:
1) Repaired permissions 2) SMC reset 3) PRAM reset 4) Wont allow me to safe boot 5) Won't allow me to boot from install disk 6) Won't install SL disk to try and repair install
The problem is that the mac will not boot period.When I press the Option on start up, it takes me to a screen where I could select to boot from the Macintosh Hard disk or Recovery 10.9 disk.Choosing either of these still does not boot up the computer.
I think that the hard disk is damaged but what I do not understand is why I can still get the option to choose the Hard disk or the Recovery disk.I am waiting to hear from Apple Support on when I can take my imac to the genius bar and I was wondering if there is anything I can do before then. Intel imac 27-inch bought refurbished in November 2010 with imac apple care.Intel quard core processor, 4 Gig RAM, 1 terabyte HD
My iMac won't boot up. I think its HDD is dead . Is there a way for me to use target disk mode to boot from my laptop HDD so that I can rescue my iMac HDD?
I've had a 24" iMac (alu) for about a year. Now I bought a Mac Pro (Love it!). Therefore i wanted to sell the iMac, but:
All the time I've had it, dust has been building up inside the screen. I thought it was inside the glass cover, but I carefully removed that and cleaned it and the surface of the LCD element. That didn't do it...
From what I can see, the dust is inside the LCD element. Building up on the white lit surface behind the LCD crystals. (See the attached image).
We have some new Intel iMacs and have transferred some information from our previous G4 PM (one MDD and one Quicksilver) to the new iMacs. For some reason the G4's will now not boot up and kernal panic on the gray Apple boot screen. This has happened to all the G4's we have in our office. They are running OSX 10.2.8 and the iMacs are running OSX 10.4.4. We can still mount the drives from the G4's using FireWire Target Disk mode.
I have tried zapping the PRAM etc but they still wont boot. I have also tried running the OSX 10.2 Installer disks to try and reinstall OSX on the G4's but the installer cannot see the drives?
I tried running the disk utility. It finds the hard drive but wont let me verify/repair permissions (the option is grayed out). It will only let me verify/repair the disk, but it finds no errors. The installer cannot find the disk at all.
We have more than one hard drive in the G4's and the target disk mode will only mount the system drive, it doesnt see the others, so we cannot retrieve out information. Whats going on. Never had this problem before.
Anyone have any idea what is wrong. Never had this problem before using the FireWire transfer.
I have a 1Ghz PowerPC G4 iMac and want to delete everything and start again with Leopard. (it seems to be within the system reqs.) Problem is the DVD drive isn't functioning properly. It sees the OSX DVD but won't boot from it. Question - What's the best alternative method? Create a boot firewire disk?
I'm getting a new iMac 27" (1TB) this week and was wondering, which 2TB hard drives Apple installs.
I have read that they use WD and Seagate, but which models exactly? (caviar green or black) If you could post the infos of your iMac that would be .
Also, I want to upgrade to a 2TB drive. I know, I have to stick with the brand that comes with my iMac, because of power issues. However, I have also read that Apple uses a special OEM drive and an upgrade won't work (heat problems remain, a special firmware is necessary) Is that true?
I see a great deal of debate between the quad i5 and i7 but nothing between the two i5's. I'm not super techy so I really can't tell what the benefits or disadvantages there are between the two. In fact, I didn't even notice that there are two different ones until I was poking around on apples site.
Specs:
3.6 i5 with 4mb lvl 3 cache and HT and TB
-or-
2.8 quad core i5 with 8mb of lvl 3 cache with TB but NO HT
*you can build identical iMacs both with the 5750 (5850m) and the 3.6 is only 50 bucs more.
Seems that the more I read about refurb imacs the more I notice dust on the inside of the screen
I have two specs of dust trapped on mine, they haven't annoyed me yet but I'm considering getting suction cups and cleaning it. Would this be the best approach or sending it in?
I haven't done it and I'm slightly scared to do it
A while back I saw a link on macrumors that listed which specific core2duo chip was placed in various macs (example-core2duo E8400, etc.)
I was wondering if anyone knew where I can find this information again? I specifically was looking for my model (2008 24" imac) but would a site where I could find others as well.
And if you are going to post "search google" or the like dont bother as I ALREADY have searched google and cannot find this information easily.
Since I do Hd Video editing and the iMac does not have an external eSata port I am willing to replace my dvd super drive with a hard drive if possible?
there is a small speck of something on the inside of my iMac screen. at first i thought it was a dead/stuck pixel, but closer observation reveals that it's a little particle on the inside of the screen. i've tried tapping the glass lightly to try to dislodge the speck but so far no luck.
is this something that i can fix myself? i've recently had the lcd replaced in my computer, could it have gotten in there when they did that? should i take it back and ask them to clean the inside of the glass? i assume it would be a quick process, will it be covered under warranty?
The top left of my iMac Alu gets really, really hot. Much more then the rest of the body, alot of the time it hurts to touch the top left corner. So what's causing all this heat?
I bought a used iMac that was supposedly in "mint condition."
Anyhow the screen is majorly condensated and I want to clean it. I saw a video on YouTube of some guy using a roller to do this.
Does anyone know of any good products to use to clean the inner LCD and back part of the glass? I also need to be careful where to do this so not to attract any dust.
has all my art course work on. When pressing the power button there is no start up, screen stays black. There is a noise from the Disc Drive, when you put your ear close you can hear the Disc spinning, occasionally it starts to make a loader noise like its trying to spin to full speed maybe, but stops before it can. Green light can be seen from bottom, tried unplugging and waiting, tried pressing the cmd R-P keys down at start up. Also tried as suggested on the apple website to use a paper clip to manually eject the disc.
Does anyone know the maximum operating temperature inside the new 27-inch iMac? I've read that they shouldn't be operated beyond 35 degrees Celsius [95 degrees F]. But that's the ambient temperature, not the computer's internal temperature.
I ask this because I have been running iStat for years. It monitors various things, including internal temperature. I always keep an eye on this during warm days, even when I have the air-conditioning on. So it would be good to know the maximum temperature.
In April 2011 I bought an iMac 27 ". In November, begin the problems with gray spots in the corners. I took it to Apple technical support here in Chile and the part was replaced because the warranty was in effect.In April this year, again began to appear stains. Again I took it for service, but this time I should paid around $ 1,000 for the repair (obviously i said NO).How can a piece fails so soon and Apple doesn't takes over the situation, forcing their loyal customers (all my computers are Apple), to pay for the repair of a factory fault?Is there any legal way to force Apple to answer for the repair or replacement of the part (LCD)?
i just opened my imac g4 1.25 ghz 17" (lamp imac) and found a wire that is taped at the end and apparently not connected somewhere.. as you can see in the pics, the one i'm holding with an orange tip at the tip.. i dont really know the history of this imac.. :c
is this a cause for concern on my part? i'm replacing/upgrading the dvd rom and hard disk.. that's why i saw that wire.
I got tiger install discs for my emac but I cant get it to run the install. I tried putting the disc in and clicking the restart button on the screen that says "Welcome to Mac OS X 10.4 Tiger", but when I click it it just restarts my computer and does nothing. I then tried the alternate install it did the same thing it did nothing but restarted my eMac. I then tried restarting my computer while holding c key nothing once again. Then I tried holding down apple, option, f , and o keys and then typed in cd boot and also tried cdrom boot nether of them worked so i restarted and tried dvd boot/dvdrom boot nothing worked on all the occasion i got a grey screen with a circle with a line through it. What do I need to do to get these install discs to work?
I have a MacBook 4,1 with Intel Core 2 Duo processor 4GB Ram. It is taking over 10 minutes to boot up past the gray apple screen when I turn it on. First I cleared the PRam (?) then I checked the disk using Disk Utility Verify, and it said the disk needed repairs. So I ran the disk repair and it said it was unable to fix the errors on the HD.
I did a little research and tried booting into the Single User mode, then running /sbin/fsck -fy. It said that it found errors but could not fix them. I ran it two more times as suggested and got the same result each time. I then tried rebooting and now instead of taking 10 minutes to boot up, it takes about 5 minutes on the gray apple screen and then just turns off. I started in Verbose mode to try to troubleshoot the error and it appears the last thing to come across the screen before power down is a message "Apple Yukon 2: RxRingSize <= 1024....etc".
I decided next I would run the Apple Hardware Tester. The test came back with an error code "4SNS/1/40000001:IG0C-0.265". I am very good at searching the web but I could not find any errors that had the IG0C or IGOC or any combination at the end, but plenty of 4SNS/1/40000000(1) errors with different endings. From what I can tell people are saying anything with 4SNS/1/4000000 is a logic board failure, but this computer was literally just booting this morning until I did the /sbin/fsck -fy.
I am considering purchasing diskwarrior but want to make sure it can help my situation before I purchase it. My imac will not boot from the internal hard drive (Intel processor) When I use disk utility to try and repair the disk, I get error messages and it won't repair. I can see the HD but cannot repair it. When I connect using target mode with my mac book pro, the hard drive does not appear on my host (macbook pro) computer. I have reloaded OS X (Leopard) onto a firewire external drive and can boot my imac that way but I can not find my original internal Macintosh HD. Will disk warrior be able to help with this scenario. I would really like to access that internal Macintosh HD and retrieve my files.
