I bought a used iMac that was supposedly in "mint condition."
Anyhow the screen is majorly condensated and I want to clean it. I saw a video on YouTube of some guy using a roller to do this.
Does anyone know of any good products to use to clean the inner LCD and back part of the glass? I also need to be careful where to do this so not to attract any dust.
We got a new furnace today and during the replacement, soot got everywhere. My PowerMac G4 Digital Audio was running the entire time, sucking and blowing the soot (you couldn't see it, but it did happen). My white Apple keyboard and Mighty Mouse are grey as well.
Any tips for cleaning it out? I wiped off one of the HDDs, and it had some soot on it and I'm a bit paranoid about the cleanliness of my computers.
My Mac mini (mid-'07) was also running for the entire time, although because it only has the exhaust vent I'm not as worried, but if you've got tips for cleaning that, I am looking for an excuse to open it .
PS: I'll probably open and clean everything that has either slats on the top or a fan to bring air in that was on.
I notice people saying to use water when cleaning the screen, well that just smears the smudges. So, is there any product I can use such as Windex, 409, etc, on the screen of my iMac or is my only option the absurdly overpriced cleaners from the Apple Store?
View 4 Replies View Relatedthere is a small speck of something on the inside of my iMac screen. at first i thought it was a dead/stuck pixel, but closer observation reveals that it's a little particle on the inside of the screen. i've tried tapping the glass lightly to try to dislodge the speck but so far no luck.
is this something that i can fix myself? i've recently had the lcd replaced in my computer, could it have gotten in there when they did that? should i take it back and ask them to clean the inside of the glass? i assume it would be a quick process, will it be covered under warranty?
In April 2011 I bought an iMac 27 ". In November, begin the problems with gray spots in the corners. I took it to Apple technical support here in Chile and the part was replaced because the warranty was in effect.In April this year, again began to appear stains. Again I took it for service, but this time I should paid around $ 1,000 for the repair (obviously i said NO).How can a piece fails so soon and Apple doesn't takes over the situation, forcing their loyal customers (all my computers are Apple), to pay for the repair of a factory fault?Is there any legal way to force Apple to answer for the repair or replacement of the part (LCD)?
Info:
iMac, Mac OS X (10.7.4)
I have the dreaded " unexpected error occured. (Error code 0x8002006E)" problem.
Basically it doesn't want to burn DVDs ( fine on CDs though ).
I've read various ways to fix this such as zapping pram, SMC reset etc. and none worked. I also read that a cleaning disc might do the job.
So my question is, are these discs safe in a MacbookPro machine? And as I recall these discs have little bristles on one side - which way up should they go ( facing up or down )?
I cannot see how to remove the subtle "smudges" that accumulate. It is like there are fingerprints on the screen, and even with a soft paper towell and gentle cleaning fluid, there is no real improvement.
I know this sounds silly, but the cool screen on the laptop is a part of its attraction, and it is natural to want to make it nice.
y Macbook Pro booklet 'Everything Mac' WARNS: 'The battery in your Macbook can be replaced only by and Apple Authorized Service Provider, or an Apple Retail Store' (page 31). I was even warned, 'mess with the battery and you lose guarantee rights'.
OK - I wont touch the battery, but, hey Mr Apple, how do I clean my screen?
So I look it up on my Apple sanctioned 'Macbook pro users guide' in pdf:
'To clean your MacBook Pro screen, do the following: Shut down your MacBook Pro, unplug the power adapter, and REMOVE the battery.' (page 109)
Appart from the contradicting information, we have to remove the battery to clean our screen?!?
Does anybody have any good tips on cleaning your screen.
View 4 Replies View Relatedwhat should i used to clean the aluminum unibody, when it comes to the lcd screen i know alcohol and other solutions are bad for lcd because of the thin flim layer but the macbook pro has glass so it should'nt hurt the screen to use those kind of products.
Info:
MacBook Pro, Mac OS X (10.6.8)
Screen showing static stripes after cleaning. What could be the problem?
Info:
MacBook Air
I've had a 24" iMac (alu) for about a year. Now I bought a Mac Pro (Love it!). Therefore i wanted to sell the iMac, but:
All the time I've had it, dust has been building up inside the screen. I thought it was inside the glass cover, but I carefully removed that and cleaned it and the surface of the LCD element. That didn't do it...
From what I can see, the dust is inside the LCD element. Building up on the white lit surface behind the LCD crystals. (See the attached image).
I was working on my 15" (2.2GHz) MBP when a tiny little bug started crawling across my computer screen. I tried just blowing and waving it off, but it kept on just crawling around, paying no attention to my protests. So I smushed it, like it deserved. I gently pressed against the screen with my thumb and that should have been that - a little wipe and back to work.
There is a problem. It turns out, the little bug was INSIDE the screen! I didn't have the lights on so it was just backlit and I couldn't tell that it was inside! Somehow it got in between the glass and the reflector (or something like that) and is now a mushy mess (albeit a very small one - 2mmx1mm) right in the center of the screen.
How can I clean this mess? I JUST (as in 3 weeks ago) had the display replaced through AppleCare but I'm pretty sure this kind of things falls squarely between the "acts of nature" and "acts of negligence" clauses in the warranty.
I've removed the display and bezels, but chickened out once it came time to pull the LCD. Plus, I don't even know if it is possible to further dismantle the LCD anyway so...
Anyone know if it is possible to separate the layers of an LCD? I'm not even sure what those layers are. Maybe over time the bug will just dehydrate and burn away, but I doubt it.
My screen has condensation inside
Info:
iMac
I am about to sell my current iMac because I have got a new one.
1. I wanted to restore the iMac as new. It originally game with Tiger if I erase the disk, do I have to install tiger, the upgrade to leopard and then upgrade to snow leopard?
2.Is there a way to delete everything except some programs like Photoshop, iLife 09 and iWork?
3.Is there a way to "reset" the iMac so when the buyer turns the computer it starts with the setup and welcome movie?
I'm getting a new iMac 27" (1TB) this week and was wondering, which 2TB hard drives Apple installs.
I have read that they use WD and Seagate, but which models exactly? (caviar green or black) If you could post the infos of your iMac that would be .
Also, I want to upgrade to a 2TB drive. I know, I have to stick with the brand that comes with my iMac, because of power issues. However, I have also read that Apple uses a special OEM drive and an upgrade won't work (heat problems remain, a special firmware is necessary) Is that true?
I see a great deal of debate between the quad i5 and i7 but nothing between the two i5's. I'm not super techy so I really can't tell what the benefits or disadvantages there are between the two. In fact, I didn't even notice that there are two different ones until I was poking around on apples site.
Specs:
3.6 i5 with 4mb lvl 3 cache and HT and TB
-or-
2.8 quad core i5 with 8mb of lvl 3 cache with TB but NO HT
*you can build identical iMacs both with the 5750 (5850m) and the 3.6 is only 50 bucs more.
Seems that the more I read about refurb imacs the more I notice dust on the inside of the screen
I have two specs of dust trapped on mine, they haven't annoyed me yet but I'm considering getting suction cups and cleaning it. Would this be the best approach or sending it in?
I haven't done it and I'm slightly scared to do it
A while back I saw a link on macrumors that listed which specific core2duo chip was placed in various macs (example-core2duo E8400, etc.)
I was wondering if anyone knew where I can find this information again? I specifically was looking for my model (2008 24" imac) but would a site where I could find others as well.
And if you are going to post "search google" or the like dont bother as I ALREADY have searched google and cannot find this information easily.
Since I do Hd Video editing and the iMac does not have an external eSata port I am willing to replace my dvd super drive with a hard drive if possible?
View 2 Replies View RelatedSo I have XP installed on my 27" iMac, and that's is cool news. I also have a windows 7 professional upgrade disk, that bootcamp won't recognize. I would just blow away that partition and put 7 on. I don't care for any of my data on the XP install, I just want to get 7 on there with an upgrade disk.
How can I boot from the upgrade disk inside XP? Or is there another way?
If I try and install from inside XP it tells me it can only be done (configuration sets) from Windows PE (Preinstall enviroment)
as in I need to be booted from the disk.
How do I accomplish this? I also have a 2009 late iMac, which means that the video drivers don't work out correctly, but I already remedied that with making the video driver usb drive that fixes the issue. I just need to figure out how to get to the point to install.
The top left of my iMac Alu gets really, really hot. Much more then the rest of the body, alot of the time it hurts to touch the top left corner. So what's causing all this heat?
View 6 Replies View Relatedhas all my art course work on. When pressing the power button there is no start up, screen stays black. There is a noise from the Disc Drive, when you put your ear close you can hear the Disc spinning, occasionally it starts to make a loader noise like its trying to spin to full speed maybe, but stops before it can. Green light can be seen from bottom, tried unplugging and waiting, tried pressing the cmd R-P keys down at start up. Also tried as suggested on the apple website to use a paper clip to manually eject the disc.
View 6 Replies View RelatedDoes anyone know the maximum operating temperature inside the new 27-inch iMac? I've read that they shouldn't be operated beyond 35 degrees Celsius [95 degrees F]. But that's the ambient temperature, not the computer's internal temperature.
I ask this because I have been running iStat for years. It monitors various things, including internal temperature. I always keep an eye on this during warm days, even when I have the air-conditioning on. So it would be good to know the maximum temperature.
there are 2 lines on headphones, it broke from the first line, so both lines are inside?
View 4 Replies View Relatedi just opened my imac g4 1.25 ghz 17" (lamp imac) and found a wire that is taped at the end and apparently not connected somewhere.. as you can see in the pics, the one i'm holding with an orange tip at the tip.. i dont really know the history of this imac.. :c
is this a cause for concern on my part? i'm replacing/upgrading the dvd rom and hard disk.. that's why i saw that wire.
We are getting a white screen with flashing file icon with question mark inside the file.
Info:
iMac
Just weeks after buying my new unibody MacBook Pro in late December 2008, I noticed a few dust specks. I was in Shanghai (where there were no Apple Stores), so I waited a few weeks until I was supposed to go to Sydney.
When I arrived in Sydney, I booked a Genius Bar appointment. After the Genius inspected the screen and attempted to wipe the screen with some iKlear, he told me that he would check if there were any new screens and that if there were, he would replace it today.
So, I waited for about four hours for the repair, then came at the time he told me to collect it. I waited for another two hours, as the Genius also found out that my AirPort Card was faulty, so they were going to replace that as well.
It was about ten o'clock at night when I got back my MBP with a new screen. I thought everything was all right, until I found out that the person who repaired my screen had misaligned the top and bottom, so the bottom stuck out 2mm, or rather, the screen was sunk back 2mm. I couldn't go back to the store the next day, since I was bound to go back to Shanghai early next morning since I had school on Monday (I'm a student).
After about two weeks with the new screen, I noticed that the hinge had gotten noticeably looser, and when I moved it, it wobbled back and forth for a few seconds. Then, a week from then on, I noticed a dust speck in the lower left corner. I also had one in the center of the screen. The summer holidays were in two months, so I decided to just hold on for a little longer.
Since the summer holidays have rolled around, I'm going back to Sydney in July. Do you think that Apple would replace my screen the second time?
EDIT: I also found out that my MBP has some type of problem. It is extremely dependent on the battery, and I have to plug in the charger, or it shuts down instantly (or in a few minutes). After the crash, the battery lights would blink on and off (all of the lights). I'd have to remove the battery cover, pull out the battery, put back the battery, close the battery cover and plug in the charger so that the lights would revert back to the normal lights.
I went to a dealer in Shanghai about it and they told me that it might be the battery's problem, so I got a new battery for testing out, but then the computer shut down after about one hour of usage. I'm almost definitely sure that it is the logic board's problem, and do you think that Apple would replace my logic board for free? (I have never dropped my MBP, or have any reason for it to suddenly turn faulty.)
I'm sure this should be simple but I can't figure it out.
I have my iMac connected to my TV and am using Plex to watch stuff on the TV.
What I'd like to do is turn my imac screen off without turning off the second monitor output (i.e. tv) as the imac screen is a bit bright/distracting (even on lowest brightness) when watching in the dark.
I just want to clean off my computer, so it runs a little faster. It's getting slow and starting to take a long time to think.
View 1 Replies View Related