PowerPC :: 15" IMac G3 Won't Boot After Upgrade Hardware
Jul 13, 2009
Just bought a fantastic condition deep-blue 500 MHz G3 DV iMac yesterday for 15. Steal! The original hard drive was knackered so I've replaced it with an 80gb 5400RPM one which should be more than adequate. I'm aiming to get OS X on it. My 350 MHz G3 runs is well, so this should scream. Unfortunately, OS9.0 and OS9.1 disks in the optical drive still produce a flashing folder icon. I need to boot OS9.0 in order to flash the iMac's firmware before I can stick OS X on it, but it just won't boot at all. I'm thinking it could possibly be a knackered optical drive, but before I go to the trouble of finding a workaround, I wondered if anybody here might have some ideas.
View 1 Replies
ADVERTISEMENT
Jun 8, 2008
iMac intel core duo...
My computer had 1GB of RAM, so I just bought a 2GB RAM card. When I installed both cards together i can hear the hard drive start up and then nothing, no boot up, just a black screen and the "sleep" light is just solid. I know both cards are fine because I tested each by themselves and they both started up and worked well, its only when they are both in at the same time does it do this. also both slots work because i tested both of them! I tried to do the PRAM reset and it doesnt work, and I tried to do it with one card in and then reset and then shutdown and install the 2nd card and still nothing. Please give me some advice, i am soooo frustrated!!
View 17 Replies
View Related
Oct 22, 2010
So I have XP installed on my 27" iMac, and that's is cool news. I also have a windows 7 professional upgrade disk, that bootcamp won't recognize. I would just blow away that partition and put 7 on. I don't care for any of my data on the XP install, I just want to get 7 on there with an upgrade disk.
How can I boot from the upgrade disk inside XP? Or is there another way?
If I try and install from inside XP it tells me it can only be done (configuration sets) from Windows PE (Preinstall enviroment)
as in I need to be booted from the disk.
How do I accomplish this? I also have a 2009 late iMac, which means that the video drivers don't work out correctly, but I already remedied that with making the video driver usb drive that fixes the issue. I just need to figure out how to get to the point to install.
View 2 Replies
View Related
Mar 2, 2009
i recently bought a used imac g5 1.8ghz version 10.3.5.
is there any way i can change the processor to an intel processor as i cant seem to upgrade my os (and a lot of other programs) running on the current version.
View 2 Replies
View Related
Jan 22, 2010
I've got an old iMac 1.8GHz PowerPC G5 that I love to use for surfing the web etc.
I'm finding that I can't view anything that requires Flash as my system (10.3.9) won't allow me to download the latest Flash or Firefox.
I tried asking in the local Apple store how I could upgrade my OS but the guy said they don't sell the OS upgrade anymore.
Is there anything I can do to upgrade my OS so that I can download newer versions of software like Flash or Firefox?
I have another computer (imac intel) but I really don't want to have to get rid of this one as I like it and apart from the OS issue, it still works fine.
View 2 Replies
View Related
May 1, 2010
I was planning to upgrade our family's computers to a new MBP 13 inch with a 320 HDD and a iMac 3.06 GHz base model.
I was going to do a the Apple financing of no interest for 18 months since the 13 inch MBP came out but after reading online that an iMac update may be out in the near future I am wondering if I should wait.
Would like advice on whether I should just buy the 2 computers now and not worry or should I wait for next iMac. We have five kids that are using the computers and iPhones/iPods and speed is what they want for web-based games. The iBook is fine for me doing Quicken, e-mail and normal stuff but is seizing up sometimes. Hard Drive space is biggest issue since iMac only has around 160 gig HDD.
Everything I have read I believe that these 2 computers will be fine. We hold computers for 5 years and so I am getting to end of life on the ones I have.
My wife has also been using a 2006 circa MacBook Pro 17 inch that I use for work and loves it. She thought the 13 inch MBP keyboard was smaller but I told her I believe they are the same.
View 4 Replies
View Related
Apr 10, 2009
I'm still hanging in there with my powermac g5 from 2004 (dual 1.8 g5, 2gb ram, ati 9800xt 256mb).
I do a lot of photo processing, and some video editing. This summer i'll be upgrading my SLR (10mp to 15mp), and I'll also be shooting 720p 30fps video.
I'm thinking I should upgrade my computer the same time as the camera. The g5 has leopard and CS3, Apeture, Final cut pro. these programs are really chugging along (sigh, the g5 used to be SOOO fast).
SO my question is... will the new imac (3.06, 4gb ram, ATI HD) be a noticeable bump in performance, worth the upgrade? Also, how much should I sell my g5 for (including the aluminum 20" apple cinema display).
View 3 Replies
View Related
Oct 14, 2007
I picked up this G4 (M6498, 17", 800/256/80HD) from a lady in her 80's whose son sent her a new G5, but I'm having trouble getting it to boot on HD or CD. When I turn it on all I get is a file icon alternating between mac face and "?". Boot from IMAC CD: same thing - I hear the CD track switching a few times periodically but that's it. Boot from OS9 Install CD: same thing. I'm not that familiar with iMac, although I've had a few other Mac machines on and off through the years AppleIIe, PowerMacG3). Any suggestions what to try next?
View 2 Replies
View Related
Dec 25, 2008
I have a 700MHz iMac G3, which froze during DVD playback and it needed to be rebooted. Now it will not boot, the gray screen comes up with the loading circle, but it will just shut down after about a minute. I have reset the PRAM, PMU and it is running 10.4. No beeps or anything when it shuts down, it just turns off.
View 13 Replies
View Related
Dec 4, 2009
I have an old IMac G5 without an Intel processor. The other day I heard a whistle sound coming out of it. The next day I turned it on, got the apple and a revolving pinwheel. The picture of the apple was a little broken up. After a minute the pinwheel stopped. Tried to boot of the leopard CD. Same thing happened. Looked inside for swollen capacitors. Did not find any. Does anyone have any ideas as to what can be wrong.
View 2 Replies
View Related
Jan 9, 2010
I woke up this morning and my imac wouldn't wake from sleep. then when it finally did I had a all black screen with a few red pixels at the top. the imac wouldn't do anything so I had to hold the power button down and restart. now when I try to turn it on, I hear the apple sound, I get the grey screen (10.4) with the white apple and a spinning circle, then it goes to a light blue screen and just sits there. I still have a cursor and it moves with my mouse.
View 5 Replies
View Related
Dec 11, 2008
I just bought an iMac with a G4 processor from a friend... The only problem is that apparently some vital file was deleted and as a result, it will not start up. I have a Tiger recovery disc, but because I'm only being shown the gray apple screen and the loading circle, I can't actually use it. Any ideas?
View 4 Replies
View Related
Aug 8, 2007
The iMac forum is clogged with news of the new iMac, so I decided to post my problem here: I just bought a friends old iBook G3 for writing and surfing the web. It's slow and full of his junk. He doesn't have the original disks, so I was wondering, would the install disks from my Intel iMac work on it?
View 8 Replies
View Related
May 12, 2010
I just bought an 800 MHz iMac G4 , and whenever I try to boot into target disk mode it shuts itself down. I am connecting to an intel iMac, and the g4 has no OS installed on it (I am trying to install tiger using my dvd install dvd, the one with the black background and grey x which the G4 won't read). Does anyone know what could be causing this issue? I've already tried reseting the PMU and PRAM.
View 11 Replies
View Related
May 17, 2007
I have an imac G5 20" that is approximately two years old. About 2-3 weeks ago it started acting a bit flakey....it would lock up on std apps (firefox), it would always lock up after being revived from sleeping etc. I ran the hardware test and everything checked out. Then a few days ago it wouldn't boot. I get the chime, I hear the drive spinning, then the fans kick into high gear and I get a screen with a folder in the middle with a "question mark icon" and a "finder icon" displaying alternatively inside the folder. So I booted up the hardware test dvd and the test failed 27 seconds in with the following error code:
2GMC/2/15: built-in
Logic Board Error Detected
Are there any other steps I should be taking before taking in for service?
View 4 Replies
View Related
Dec 16, 2008
Originally my iMac G5 (1.6 GHz 17 inch) was failing to boot up. It would get to the grey screen and the apple and it would just stay there and pretend to be a rocket ship with it's little fan whirring as fast as it could after five minutes. So I reset the SMU, fan stopped, still wouldn't boot. Booted it off the 10.5 install cd (which it was running fine until it wouldn't start up). It wouldn't see the Macintosh HD for a while unless you went to disc utility > partitions and changed it from current to one and instead of applying just let it sit there before switching it back to current. Took about 10 minutes of sitting there.
I did disk repair said there was no problem. Disk permission repair said there was a few problems and said it repaired them. To be safe I backed everything up using target disk mode (where the fan tried to play rocket again even though I reset the SMU), erased my hard drive and reinstalled. Now it shuts down randomly when it goes idle, and takes 10 minutes to start up past loading the dock to load the apple bar Mac HD icon and whatever is on the desktop (which is a single empty folder).
View 1 Replies
View Related
Feb 3, 2006
We have some new Intel iMacs and have transferred some information from our previous G4 PM (one MDD and one Quicksilver) to the new iMacs. For some reason the G4's will now not boot up and kernal panic on the gray Apple boot screen. This has happened to all the G4's we have in our office. They are running OSX 10.2.8 and the iMacs are running OSX 10.4.4. We can still mount the drives from the G4's using FireWire Target Disk mode.
I have tried zapping the PRAM etc but they still wont boot. I have also tried running the OSX 10.2 Installer disks to try and reinstall OSX on the G4's but the installer cannot see the drives?
I tried running the disk utility. It finds the hard drive but wont let me verify/repair permissions (the option is grayed out). It will only let me verify/repair the disk, but it finds no errors. The installer cannot find the disk at all.
We have more than one hard drive in the G4's and the target disk mode will only mount the system drive, it doesnt see the others, so we cannot retrieve out information. Whats going on. Never had this problem before.
Anyone have any idea what is wrong. Never had this problem before using the FireWire transfer.
View 5 Replies
View Related
Jul 25, 2008
Does anyone know the exact name and part numbers for Wireless upgrade kits for the following machines:
G5 Dual 2.0 ghz - (main board has 8 slots for RAM upgrade)
Mac Pro Quad 3.0ghz
I've been searching around in circles trying to find this out and I'm just getting no where!
View 6 Replies
View Related
Nov 29, 2007
Has anyone tried to upgrade their old iMac G5 with a new Intel core Duo processor? If so how do I go about installing one?
View 6 Replies
View Related
Jun 11, 2007
I have an iBook G4 1.07 GHz 30 gb 256 RAM with Panther. It was working fine until my HD got close to being full. Now I can't get it to boot past the Apple screen. It will either freeze there, or move on to the blue screen and freeze before the progress bar enters. I want to re-install Panther but I can't get any CD to boot during startup by holding "C", including the Panther OS CD, the Hardware Test CD, or the Tech Tool CD. I am able to boot to single user mode, where I type fsck -fy, and I recieve no errors with the hardware. I had this issue beore and my HD had to be replaced by Apple.
View 6 Replies
View Related
Oct 20, 2008
I curently have 10.3.9 with a PowerPC G4 dual w/ 1.25 processors and 2 gig of ram. I want the highest upgrade I can get that will be compatibe with my software which is:
Quark 6.5
Acrobat 7.1
Acrobat Distiller 7.0
Illustrator CS1
Photoshop CS1
Microsoft Office (don't know what version but I've had it for years)
I really can't afford to go buy all the software again and I don't want my system to crash. Any suggestions?
This upgrade is mostly spawned due to the recent purchase of a new iPod Nano... Not supported by my current OS! Man, I didn't read the requirements, shame on me. However, the dang thing will work on my kid's PC w/ XP Pro. I only got the Nano cause it's mac - he wanted the Zune that ONLY works w/ PC.
View 2 Replies
View Related
Oct 17, 2010
Got a Powerbook G4 with a "messed up" HD. Couldn't fix it, so got a firewire drive and ran a bunch of utilities from my newer intel iMac. Cloned the Powerbook's drive to a USB hard drive, did all repairs on the USB drive, formatted the Powerbook, cloned the USB drive BACK to the Powerbook, but it just gives me the flashing question mark when I try to boot.
What is REALLY weird is I can boot my iMac FROM THE CLONE ON THE USB DRIVE and it works fine.In Drive Genius the Powerbook drive (in TDM) shows as a single drive, but if I go to "Repartition" then it shows 3 smaller partitions on the drive; I believe they're called "Apple Free Space" or something like that (can't check right now, I'm running Repair on it AGAIN at the moment).
I feel like I'm missing something simple, like the machine just doesn't see one thing that tells it "Oh, yeah! There's an operating system on this drive!" I have tried partitioning from Drive Genius and Disk Utility. Have done clones back and forth with Drive Genius, Disk Utility, and Carbon Copy Cloner. Same results each time.
View 6 Replies
View Related
May 21, 2012
I just recently bought 8gs of Corsair Mac RAM, links at the bottom.So they I changed the RAM sticks, not the first time I've upgraded RAM, just like I have every other time.But after switching the RAM the mac won't boot. Tried swapping back the old ones and still nothing.
View 1 Replies
View Related
May 15, 2010
I have a 2 week old iMac 27", i7, 2tb Hard Drive, 16gb RM
In the second week the boot up times became very slow.
I would turn the machine on and get the chime within 5 seconds or so.
Then just a black/blank screen.
Eventually after about 10mins I would get a white screen then it would boot up normally.
Now the machine just doesn't get to the white screen. So I get the chime and then just darkness. It does sound like the machine is on (usual quiet imac whirring).
I've tried various key commands when I turn the machine on including pressing C with the install disk in the dvd drive and the alt, control, P, R pram reset.
I've also tried unplugging all the cables, leaving the machine for a minute and switching back on. I did manage to perform the PRAM reset once. I reset the machine and it booted fine.
But now when I switch it on just darkness.
I've called after sales and will try to get the machine replaced but in the meantime is there anything I could try that might make the machine work? I need to do a remix this weekend (deadline Monday) so really need to get it working.
View 3 Replies
View Related
Jun 19, 2012
I have upgraded my mbpro with an SSD and After ist it doesnt Boot?
Info:
MacBook Pro, Mac OS X (10.7.4)
View 1 Replies
View Related
Jun 25, 2014
Just got my MacBook Air back from a certified Apple repair shop - I'd had maintenance done, including upgrading to Mavericks (10.9.3). Plugged it in, started it up and never got beyond the startup screen - Apple logo and spinning wheel after 5, 8, 10 minutes...
Tried starting in Safe Mode, but once the load bar progresses about 1/5 of the way, the bar disappears, the wheel spins and then the screen goes black.
View 3 Replies
View Related
Apr 12, 2010
i just upgraded my MBP13 with 4gb and a 500 Hitachi drive. the process went smoothly. i didnt quite understand the time machine OSX reinstall process, i was mostly afraid of having to re-install every other programs. So i went the easy way and downloaded super duper to clone my drive and did the switch.
it use to take around 25-30sec to boot. now it takes more like 45+. I also noticed a few setting had changed after the upgrade. namely, little snitch (i think..) was opening a window showing me inbound transfers, my desktop image was reset and other small things like that. is it all normal? is there anything i should do to speed the boot time?
another note, there is a cd in the drive at boot, but its always there as it was when the boot time was faster. i just dont have anything to put it in so it seems like the best option to always keep it there.
View 8 Replies
View Related
Apr 7, 2012
I am running OS 10.5.8 with Windows XP dual boot on my MacBook that I purchased in late 2008.Can I easily upgrade to Lion at this point without having to reinstall the Windows XP/dual boot etc?
Info:MacBook, Mac OS X (10.5.8)
View 1 Replies
View Related
Apr 25, 2012
I have a mid-2010 13" Macbook Pro. I wanted to upgrade to 8G of ram so I bought this: url...When it arrived in the mail I installed it and booted the laptop. The apple logo comes up, the spinner starts spinning and then after awhile freezes. I figured that I recieved bad RAM so I sent it back to apple and they sent me new memory. I installed the new ram and the same thing happened again. Booting in verbose mode (Apple-V) doesn't give anything useful.This time I decided to run memory tests. I booted into single user mode (which sees 8G of memory and works fine) and ran memtest overnight. It ran 6 or 7 passes without finding any memory errors.My next plan is to try to my DVD reinstall/repair the OS to see if that will help but I don't want to do that because I would have to downgrade to Snow Lepoard and then reinstall Lion and that takes long enough to try to avoid.
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.3)
View 3 Replies
View Related
May 19, 2012
I was upgrading rame in my 2011 mac mini and removed the first module without incident but upon removing the second module the clip on the left broke and upon trying to reseat the 2 new ram modules so I could at least boot my mac the lower one is loose (which I expected but upon inserting the top one the clips did not grip it and not they are both stuck loosely in the mac mini which will not boot.
After having installed rame in a PC laptop and my mac ro I have had 2 successful ram upgrades so was not impressed to find that the ram upgrade process in the mini has some really bad clips.
So now what do I do and to complicate things even further there is some stuff on the mini I need.
View 11 Replies
View Related
