Windows On Mac :: Boot From Firewire Disk
Oct 31, 2009
I have a cramped windows partition on my hard drive which is now full, I'd love to reclaim the space by moving it to my Firewire hard drive which has much more available to dedicate to Windows. I used the "Restore" feature of Disk Utility creating an identical copy but when I restarted my computer to boot from it there was no choice of a firewire drive. I checked in the Startup Disk pref pane it wasn't to be seen, and that didn't even show the current Windows partition that was an option when I restarted. When I get info on the volumes in disk utility it says EXACTLY the same thing about each. So needless to say, I'm slightly annoyed but somehow I think I'm trying to get it to work in a way that it can't.
View 2 Replies
ADVERTISEMENT
May 5, 2012
I have a bit of a problem: I cant access my Mac because I lost the password. I recently changed my passwords on several macs, including an old PPC PowerMac G5 from ca 2005. I run 10.5.8 on this and it works flawlessly. I need to use this machine for important work.
So this is what I have tried so far:
1) Tested with all known passwords I have used in the past.
2) Tried to boot from a 10.6 install DVD
3) Tried to boot from just C and later Command C
4) Tried a different install DVD 10.4 (I dont have the original 10.5 DVD)
5) Tried to use T and Target Disk Mode from an iMac with Lion. (disconnected all other FW disks etc.)
6) Tried different Firewire cables
7) Tried different Firewire connections.
It starts obediently and show every sign of Mac-Happiness. But I simply can't get the darn thing to boot. I think it normally should have booted using 10.6?
View 3 Replies
View Related
Jun 16, 2012
I just purchased a LaCie triple interface (500GB disk to use as a bootable external drive to support our family's family of mac's, all running 10.6.8 including a 2006 Core Duo iMac, a 2007 Core2Duo iMac, a Core2Duo Mini, and a 2010 MacBook Pro.
The firewire drive does not appear as a bootable option on any of the computers, attached to either of the iMacs via the Firewire 400 port (through a 400 to 800 adaptor), or attached via the Firewire 800 port on the MBP. This is the profile of the LaCie via System Profiler on the iMac?
FireWire Bus:
Maximum Speed: Up to 400 Mb/sec
Rugged FW USB3:
Manufacturer: LaCie
[code]....
View 3 Replies
View Related
Dec 13, 2010
I have a friend who's oldish-Unibody MacBook Pro started giving him the folder with question mark-flashing symbol on boot-up. I guess it could be PRAM, but in any case, he wants to get his data off the hard drive. The computer wouldn't boot up from the install disk (holding 'c' on boot), all I have managed is to put it into Target Disk Mode, with my own MPB. The funny thing is, that it works, but all that mounts on my computer is the Install Disc (in his disk drive) and his hard drive shows up in my disk utility (see below), but it will not mount, and if I try to repair it, it gives me an error and DUPLICATES the original 'root' drive. Does this mean the hard drive itself is damaged and we need to go to a 'data specialist' to get everything off or is there anything else I could try?
View 2 Replies
View Related
Sep 6, 2008
I have a 1Ghz PowerPC G4 iMac and want to delete everything and start again with Leopard. (it seems to be within the system reqs.) Problem is the DVD drive isn't functioning properly. It sees the OSX DVD but won't boot from it. Question - What's the best alternative method? Create a boot firewire disk?
View 1 Replies
View Related
May 13, 2010
I have a 1TB MyBook from Western Digital. When I connect it via Firewire 800 to my MBP in Windows 7 (Bootcamp) it is recognised but when I start copying (read or write) it just hangs after a while or becomes very slow. If I connect it via USB it works. Do I need some drivers ? If yes, where can I found them? I found this on WD but I have the previous generation i.e. without the digital screen. If I go to the software download, it says that the drivers won't work with the previous gen.
View 1 Replies
View Related
May 15, 2009
So here is my bright idea. I still may want to have Windows on my iMac for work projects *sigh* I think I came up with a solution, I rather not partition my iMac (when I buy it) 1TB drive for Windows. Don't want Windows on my main disk - I need the storage for Mac things, personal stuff etc. Is it possible to boot from a Firewire connected external HDD to run Windows?
View 4 Replies
View Related
Oct 3, 2010
I want to copy files from my old PowerBook G4 (12") to my self-built Windows PC. I've connected the PB to my tower's Firewire PCI card, put the PB in target disk mode, and Windows prompts me with the found new hardware wizard. After the wizard finished, I did not see my PB in My Computer. It does not show up in Disk Management, either. It does appear in the Safely Remove Hardware window as "UNKNOWN MODEL AND VENDOR IEEE 1394 SBP2 Device", and in the Device Manager as "SBP2 Compliant IEEE 1394 device". How can I get this to show up so I can backup my old files?
View 2 Replies
View Related
May 26, 2009
I'm currently in the process of trying to install Win7 on my Macbook Pro (purchased July '07) using an ISO burned to a DVD with Disk Utility. Unfortunately, the DVD isn't bootable, and while the symptoms match what's in this blog post, the author's solution involved using a Windows-only program.
I'd like to know if it's possible to re-burn the ISO without the version number in the filenames as in the original solution, but with Disk Utility or something else that a Mac can use.
View 8 Replies
View Related
Oct 22, 2009
Is it possible to install Windows 7 on an internal disk via Boot Camp and then remove this disk and use it as an external drive? I have two drives for my mini, one in use and one in an external case; unfortunately, neither have room for everything plus Windows. If the answer to this question is no, then I'll buy a bigger drive. I'd just like to avoid this if possible (I already have a ton of external drives and not enough ports to plug them into).
View 4 Replies
View Related
Jan 13, 2009
I want to partition my disc, but boot camp cannot verify the disc. How can i fix this? I want to install windows 7
View 4 Replies
View Related
May 1, 2009
I recently got a new hard drive and I want to install Mac OS X 10.5 and Windows XP on it.
Is it possible to format one partition with the Mac GUID for OS X and the other partition as a Master Record for Windows XP?
Or does Mac OS X/Windows XP dual-booting has to be done through the bootcamp?
View 4 Replies
View Related
Aug 30, 2009
I recently installed windows 7 (7001) on a new drive (750gb) and re-formatted my old windows 7 drive (80gb) to be used as a backup for OS X. After that the windows boot drive was not available at start-up. Here is how it went:
original set up:
HD (os x)
Windows drive (80gb)
after new drive:
HD (os x)
windows drive (80gb and 750gb) I had windows 7 installed on both drives and at windows boot was given two choices of windows 7.
This worked fine until I reformatted the old 80gb drive to be a second mac drive and at start-up the windows boot drive was not visible only HD (os x). The windows drive is still visible on the os x desktop (all files are visible) but not under "disk startup" in the preferences pane.
current set-up:
HD (os x)
mac backup (80gb)
windows 7 (750gb) not bootable
I tried booting from windows 7 disk to repair but it does not recognize any bootable windows drive. Should I go through bootcamp utility to repair the windows drive?
View 5 Replies
View Related
Nov 15, 2009
My problem is that when I try to boot to the XP installation disk, I get the very fast, flashing, gray apple, followed by a question mark folder, followed by the ghostbuster symbol, without the ghost.
The disc keeps spinning, but the windows installation screen never appears.
I'm new to installing windows with boot camp.
Anybody know what I'm doing wrong?
View 1 Replies
View Related
Jul 14, 2010
Have had boot camp working just how I wanted it (default boot into W7) since day 1, but have just had a problem! All of a sudden, the MBP boots into OSX by default. If I hold option (alt), I do have the option to boot into windows, but under disk utility in OSX, it cant see my W7 partition! Even when I boot into W7 manually, boot camp control panel only has OSX as the only boot disk! I have searched and returned a few instances of this, but all have the complication of people using NTFS tools, I havnt done that.
View 1 Replies
View Related
Mar 25, 2012
MacBook Pro 15" (15-inch Core 2 Duo) late 2006 this apple macbook boot lion from usb or firewire ext hdd or usb stick which of 3 better must boot Lion on ext device? or none at all?
View 14 Replies
View Related
Oct 13, 2010
Is it possible to boot from an external Firewire DVD Drive? It certainly isnt from an external USB DVD. Real answers only please, not "I think so" ones based on HDDs or rumours you may have heard!...
Background:
I've got an MCE Optibay in my Mid-2010 i7 MBP. When installing Bootcamp it refuses to install from the external USB DVD drive. In the end I pulled the 2nd HDD out and reconnected the internal DVD. It then worked fine without a hitch. Then I reinstalled the 2nd HDD and all was fine for a few days.
Now I want to resize my Win7 partition (bigger, as MS Visual Studio's bigger than I thought, and I might stick some games on). I can shrink the OSX partition fine with Disk Utility, but windows won't grow the Win7 one because the empty space is before the Win7 partition, not after it. Apparently this can be done with GParted. Guess what? I can't boot the Linux based GParted CDROM from the external USB DVD drive! So, will a Firewire one work where USB fails, and solve my alternative OS booting issues? If I buy one I can then either use GParted, or delete the Win7 partition and start again without having to pull the laptop to bits all over again, only to put it back once I'm done, and possibly have the same issues in the future. Obviously I don't want to blow extra money getting a Firewire DVD drive though if it's a waste of money...
View 8 Replies
View Related
Apr 7, 2009
I setup boot camp yesterday and it messed up, blue screen of death, unresponsive, etc. I deleted the partition and I tried making a new one. 40GB out of my 250GB (173 Free). I got a error that said i needed to restore my system, i do not have a external hard drive and i couldn't do that. Then i figured out what this error means:I read it has something to do with not having enough memory, where i have to defrag something, basically it was a long explanation but it made sense (I just deleted a 50GB file).So i was able to make a 5GB partition, and i'm like, "Ok, it works, ill try a 32". I tried a 32 partition and it just sits at "Partitioning Disk". If i open disk utility i can see
View 1 Replies
View Related
Nov 27, 2010
I always get this error when I try to boot up to my Windows on Bootcamp: No bootable device -- insert boot disk and press any key
I installed Windows 7 through Bootcamp and I got everything installed perfectly!
I partitioned my Mac's hard drive into 3 before the Windows installation:
-Mac OS
-Data For Windows
-System for Windows itself
It all worked fine and i could drag and drop anything into that Data Hard drive through Windows very easily. However, when I came back to my Mac OS and partitioned my Mac Hard Drive into 2 parts(Which makes 4 partition now) and tried booting back up to my Windows, it gave me that error. I then decided to re-partition it like before which was Mac, Data and Windows. Booted it back to Windows and it gives me the same error again. I have an attached Picture showing how my partitions look now. Does anyone know how to fix it? I think it's because what my Windows is booting from is the Data Hard Drive but not my Windows 7 Hard Drive with the OS on it. Is there a way to change it's place or to tell it which Hard Drive to boot from?
View 6 Replies
View Related
Jun 13, 2012
I am trying to install Windows 7 Home Premium 64-bit on my MacBook Pro purchased late 2011 and running Lion. The Windows software was purchased online and downloaded. I then copied the .iso file to a dvd. When I try and install Windows through Boot Camp it doesn't recognize that there is a disk in the drive to install Windows. I sure hope I didn't waste my money. Has anyone installed Windows 7 from a OEM download?
Info:
MacBook
Pro, Mac OS X (10.7)
View 1 Replies
View Related
Oct 1, 2010
is it possible to have boot camp and have the windows os stored on a usb/external hd?
View 2 Replies
View Related
Dec 11, 2010
I tried to install Windows Vista (64bit) using Boot Camp. I get to the window where you select the disk partition you want to install Windows on, and there aren't any options. How can I get the newly created partition (the one I made with Boot Camp Setup Assistant before restarting) to show up on that list? Or, where do I find the "driver" that it requests instead?
View 12 Replies
View Related
May 3, 2008
I'm looking to install a Windows partition on my MB to revisit my Counter-Strike days. Does Boot Camp require a physical disk or can I use an ISO image for the install?
View 5 Replies
View Related
Jul 14, 2009
In my attempt to install Windows XP via Boot Camp, I accidentally inserted an SP1 disc instead of the SP2 disc that I have. The installation proceeded to the point where it does for most who attempt this: the screen where you are prompted to press ENTER. I could not proceed and therefore restarted the iMac and held down the mouse button upon start-up to remove the CD.
HERE IS THE PROBLEM:I can not boot into OS X because the keyboard shortcuts (those that might allow me to select which partition to boot from and/or reset PRAM) seem to be disabled. Instead, a reboot always ends at a black screen with a blinking DOS-esque cursor, or the prompt: "No bootable device -- insert boot disk and press any key."
I have attempted inserting my SP2 disc at this point, to no avail. My keyboard seems to be disabled, as if the SP1 install proceeded just enough to establish itself as the boot drive without drivers for the keyboard. I've tried using all 3 USB ports, disconnecting other USB devices. Oddly, my bluetooth mouse works to eject the CD on reboot...
View 9 Replies
View Related
Sep 20, 2009
If I log into Windows as a normal user (not administrator) and open the Boot Camp Control Panel, I'll be missing the Startup Disk pane. The only ones available are Brightness, Keyboard and Trackpad.
Is there any way to get the startup disk tab to appear while logged in as a normal user? I don't like the idea of having to run as an administrator all the time in Windows.
View 7 Replies
View Related
Mar 8, 2008
Can I boot to an .iso on a firewire drive? I've been having trouble with my disc drive lately, so this is how I'm trying to work around it
View 1 Replies
View Related
Mar 8, 2009
I recently had to take my mac mini to pieces to upgrade its RAM to 2GB. I initially had problems with booting up - it would get to the white screen with the apple logo and think for about 2 minutes then restart and repeat the process indefinitely. I managed to fix this by removing the clock battery for a while. I also zapped the PRAM after installing. But now, the strange problem is that OS X wont boot up (it will get to the white screen, think, then restart) if my firewire devices are connected. In case this helps, I have two HDDs and a DVD burner connected in daisychain to the firewire port. It definitely boots up fine with any other peripherals/connections. Once OS X has booted successfully, I can then connect my Firewire devices which seem to work fine.
I have tested my new RAM with memtest and rember and everything seems fine. After upgrading my RAM, I would also get two alerts on start up - "Do you want the application "configd" to accept incoming network connections" and "Do you want the application "mdnsresponder" to accept incoming network connections ". I have fixed this problem with the help of this post: [URL]. Aside from the horrible idea that I have damaged some hardware, does anyone have any clues as to how I can mend this? A wise colleague of mine said that if it was a windows machine, he would look at the BIOS settings as he thinks my computer is trying to boot from one of the HDDs, and that I should try to find a list of boot drives and remove the firewire HDDs if they're on it. I know macs don't run BIOS, but is there anything similar I could check?
View 2 Replies
View Related
May 11, 2010
If I have a SSD enclosed in an firewire case can I use the same hard drive to boot both the MBP and the iMac?
View 11 Replies
View Related
Jul 2, 2012
I need to start up my macbook via a firewire cable from my imac. is this possible and what cable do I need exactly.
Info:Mac OS X (10.7.3), itouch
View 4 Replies
View Related
Oct 18, 2010
how do you connect 2 macs via firewire WITHOUT target disk mode? i repeat WITHOUT TARGET DISK MODE.
View 9 Replies
View Related
