Windows On Mac :: No Bootable Device - Insert Boot Disk And Press Any Key
Nov 27, 2010
I always get this error when I try to boot up to my Windows on Bootcamp: No bootable device -- insert boot disk and press any key
I installed Windows 7 through Bootcamp and I got everything installed perfectly!
I partitioned my Mac's hard drive into 3 before the Windows installation:
-Mac OS
-Data For Windows
-System for Windows itself
It all worked fine and i could drag and drop anything into that Data Hard drive through Windows very easily. However, when I came back to my Mac OS and partitioned my Mac Hard Drive into 2 parts(Which makes 4 partition now) and tried booting back up to my Windows, it gave me that error. I then decided to re-partition it like before which was Mac, Data and Windows. Booted it back to Windows and it gives me the same error again. I have an attached Picture showing how my partitions look now. Does anyone know how to fix it? I think it's because what my Windows is booting from is the Data Hard Drive but not my Windows 7 Hard Drive with the OS on it. Is there a way to change it's place or to tell it which Hard Drive to boot from?
I have a mac mini. I used boot camp Assistant to install windows 7, and to make the partition screen stayed black and I get the following poster: "no bootable device- insert boot disk and press any key".
Not only will holding Option while booting not work, but all of the other boot tricks (safe mode, single user mode, etc), will not work. I am at a loss. I also don't have an optical drive in this particular MBP. I have an SSD where it once was.
I'm receiving the "no boot-able device insert boot disk and press any key" error every time I go to turn on my macbook air. The screen chimes, turns on and then goes black. I've been holding down the option key and that seems to work but do I have to do this every time I turn my computer on from now on?
I have a Macbook pro and when I turn on the computer the message: "NO bootable devices, insert a boot disk and press any key" appears. I click the button "alt" and I choose the option Macintosh HD and the computer works. But I can't do this procedure always. This problem started after install the Paragon software to save my files on the external hd. How can I fix that?
I'm trying to install windows xp professional sp3 from an iso I torrented. I burned it to a disc, but my computer can't find the disc during the start of installation ("No bootable device, press any key").
So earlier after installing a windows 7 ultimate 64 bit RTM copy into bootcamp, things started acting up;
After installing some updates for 7, rebooting, it took about a minute to get the HD icons up to even choose one, and after that it was fine, except then the windows partition eventually just had a blinking cursor in the top right and stayed there.
I went into OSx, removed the 7 partition completely! my HD is one partition for Osx, but when I boot now, it takes yearsssss to just boot to osx, but if I hold option, then I instantly get a Macintosh HD (that's it) and it will go straight away.
What do I need to do? Reinstall SL? Please god no.
Partitions seem to be all messed up, maybe I will re create a windows install, and remove it again. (Xp this time)
Edit, This happened on 2 different MBP's one a 2.8 duo after I put on 7, they both take forever to boot to OSx. (With no BC partition even on)
I first installed Windows XP when I got my early 2008 Mac Pro. Boot Camp was probably beta back then, but I cant say my experience has changed much through Vista 32 bit or now Windows 7 64 bit. The way to dual boot, holding ALt during boot, has worked 1/10 times. Literally. The boot symbols are usually delayed, so I know when I choose the win partition, it gives me the "No bootable device" error. Two times have I had heavy OS X crashes after these boot-up "games". This last time I had to completely reinstall OS X (or upgrade to SL). How could this be, im not even booting into OS X when I am trying to boot into win.
I even have a separate hard drive for my Win partition. Not to mention the stream of driver issues you encounter when you finally manage to get inside Windows. I actually had my apple wireless and mouse working in Windows 7, but then I installed Boot Camp drivers of the DVD, and now theyre dead. I know. Its Windows, why would I miss it? Gaming or apps, regardless. Apple shouldnt include a program that functions so poorly, if they insist on higher standards elsewhere. It only reflects badly upon them. I consider myself a decent level mac user, venturing into command line troubleshooting if needed. But BootCamp remains a mystery to me.
I have the latest 17" i7 macbook pro and installed windows 7 64 bit on 100 gb partition. Long story short, I decided to delete the partition for now and install another time. It deleted fine, but every time I turn the computer on, it will load and say " no bootable device" but if I turn on holding option, the mac partition shows up fine and loads normally when I click on it. I just need help completely getting rid of the partition. My Mac hd says 500gb capacity. So its not partitioned any more.
I have this student's laptop who's hdd was corrupted as. Only 10% worked, able to slightly read through external drive reader which took ages to read. Couldn't get testwin or chkdsk to repair it (under windows)Anyway, got him to replace the hdd and he also wanted windows on there. Either XP or 7 on there.Upon trying to boot from the windows 7 or windows XP disc, I get "no bootable device found - insert boot disc and press any key"Thus tried booting while holding C down, and tried booting while holding "option" down", problem is..i think his bios is corrupted as well. I get a white screen upon powering up. No mac logo. When I hold down "option", the mouse arrow pops up but nothing to click on.
I have been trying to install Windows 7 (yes, legit copy) to my Macbook Pro the whole day, but I keep on getting this error message saying "Press any key to boot from cd or dvd . . . ."
When I press any key on the keyboard, nothing happens. I know this copy works because I've tried this on VMWare 3. (I'm going to Boot Camp of BIOSHOCK!)
What I've Tried:
Deleted partition, recreate partition and choose the Windows 7 disk as startup disk.
I am running Leopard on a 1st gen macbook. I used boot camp assistant to partition the disk, and then went to install windows. I didn't back up bc I am an ass. Then I got to the part where I had to choose a partition. I reformatted the Boot Camp partition to NTFS. I then realized that the partition is too small. I have to get back into Leopard to fix the partition problem. Now, I can't reboot to Leopard. Holding alt or the apple key or both does not prevent the windows dvd from booting. When I eject the DVD, it tells me "no bootable disk." I never installed Vista. I don't understand how I could have overwritten anything or caused any data loss.
I want to create a minimal recovery boot disk for SL. I've followed how-to's on creating one for 10.4 and 10.5, but so far it I couldn't get it to work with 10.6. If you have successfully done this, or can point me to a pre-made image or how-to.
I am trying to install Windows 7 Ultimate onto my Mac Mini using Boot Camp Assistant. On the Windows 7 install it reboots three times. On the third time, it boots to black screen with "Press any key to boot from CD or DVD...." When I try to hit any key on my Apple Wireless Keyboard, it does nothing. Same thing when I hook up a wired USB HP keyboard to the mini. It is entirely unresponsive. I have tried letting it run for a while to see if it would move on. I have tried changing the startup disk in Mac OS X to the Windows partition but I get nothing but a blank black screen with a flashing underscore.
My brother is a windows user and as a gift i thought I'd get him an update to windows 7. I've bought the 32bit upgrade from software4students and selected digital download. Unfortunately it gives me a .exe download manager so i've downloaded the file on a windows pc and now transfered it back to mac as I'm trying to relearn how to do stuff the mac way (fairly new user ). So i now have the following files on my mac:windows 7 32bit imageas a .img file indows boot image as a .00 file Read me file and i want to make a bootable dvd. Disk Utility will let me make a new image from my usb with the files on, which just seems to be creating a .cdr file of everything on the stick. I was looking at the dvd options and it will let me burn the .img file to a dvd but wont let me include the windows boot image. Currently I'm creating a .cdr file of everything and then i'm going to burn that onto the DVD. This didn't work, it created a 16GB .cdr file as it captured all the empty space on my usb stick... Is this going to work? is there a more efficient way of creating this DVD on mac?
if y'all are kind enough to respond to this, can you keep it in baby language. I have very, very poor knowledge of the world of technology, and jargon will only confuse me! Step by step would really I have a PC I need to reinstall windows xp on, so i downloaded a torrent copy of xp from the net ( i know it's illegal, but i had a licensed copy, and my horrible ex decided to take it when he left, so i don't feel so bad ) onto my mac. I expanded the .rar file, and was left with three icons. one says image.img and has a little pic of the harddrive on it, and has about 650 MB of info. the other two are small (4kb and 24 MB), and just show a blank page icon, and say image.ccd and image.subNow, I assume I need to get those files onto a c.d, which when inserted intomy P.C will automatically begin the install process on my P.C.
so i have a windows XP professional disk, SP2 and all. i am trying to install windows, i get as far as partitioning the disk, but once it says "please insert XP disk" i do that, and it will think for a few minutes, and make a loud noise [coming from the mac] then a message pops up and says 'please insert installation disk.' the disk is brand new, what am i doing wrong? should i be partitioning the windows side larger?
I set up a 32g partition for windows xp pro. Loaded the disk and formated the partition to FAT. Hold option at startup and load windows. Upon loading windows i get the following message "There is no disk in the drive. Please insert a disk into drive." I have tried leaving the xp disk in, I have tried taking it out before loading windows and putting it in afterwords, nothing works. I can not eject disk while in windows.
I would like to make my usb memory bootable. Is it any way to get the drive to show up in startup items in sys.prefs? I have tried with fdisk, hdiutil and diskutil but have not been able to select my drive. I thought it was going to happen with fdisk. Typing fdisk /dev/disk1 gives me this.
I tried to install ubuntu with bootcamp on a different hard drive. Something happened and now when I turn on my computer it says no bootable devices. It doesn't even see my OSX hard drive. I tried booting up my computer and holding down option. It doesn't work. I have a wireless microsoft keyboard. Is it not letting me hold down option because the computer finds the wrieless keyboard to late. Some one said u have to hold down the option key before the mac sounds happens. The keyboard lights don't come on till after that. Should I get a USB keyboard? I have to press the start button on the keyboard to act as the option key when I'm in osx. Would the computer know that the start key is the option key on boot up?
software asked for automatic update. i agreed. started update. but after automatic restart. it just black screen with " no bootable device -- insert boot disk and press any key" plus i have music CD inside..
When I start the Mac the text "No bootable device, insert boot disk than press any key". Is it because I tried to install XP? If I put xp in my superdrive it starts the installing guide but I've tried to delete this partition.
I've installed some updates and now everytime I restart its saying no bootable device press any key and the only way to get into os x is to hit options and click the harddrive.
i sent my 2008 macbook into the service centre to get fixed and i got it back today and turned it on. When i tried to get onto the windows side of my laptop it came up with ' no bootable device -- insert boot disk and press any key'. So i later find out they have deleted my windows partition and just left the mac side. so im stuck on the side with no partiton i was wonder if there is a way to get back onto OSX because i cant call the store because they reopen on monday.
why that when i try to press hold the 'control' key after on my imac there is still pop out error - no bootable device in a black screen.its look like no connection between my wyerless keyboard and my imac..??help me...im new with apple computer.
