PowerPC :: Firewire Target Disk Mode Won't Show Up In Windows - Back Up Old Files

Oct 3, 2010

I want to copy files from my old PowerBook G4 (12") to my self-built Windows PC. I've connected the PB to my tower's Firewire PCI card, put the PB in target disk mode, and Windows prompts me with the found new hardware wizard. After the wizard finished, I did not see my PB in My Computer. It does not show up in Disk Management, either. It does appear in the Safely Remove Hardware window as "UNKNOWN MODEL AND VENDOR IEEE 1394 SBP2 Device", and in the Device Manager as "SBP2 Compliant IEEE 1394 device". How can I get this to show up so I can backup my old files?

View 2 Replies


ADVERTISEMENT

Power Mac :: Used Target Disk Now G4 Only Starts In Target Firewire Mode?

Apr 27, 2012

How do I get the G4 to not start up in Target Disk Mode?

Info:
iMac

View 1 Replies View Related

OS X :: Use Firewire Without Target Disk Mode?

Oct 18, 2010

how do you connect 2 macs via firewire WITHOUT target disk mode? i repeat WITHOUT TARGET DISK MODE.

View 9 Replies View Related

Hardware :: Why Does Target Disk Mode Depend On Firewire?

Oct 17, 2008

...why does Target Disk Mode (let's call it TDM for short) depend on Firewire? TDM first went away with the MacBook Air, and now we've lost TDM for the latest non-pro Macbooks.

Since I don't think Apple would invite all of the subsequent grief caused by the lack of TDM if USB were an easy out for more or less the same job, what is it that I'm missing?

View 5 Replies View Related

Intel Mac :: Firewire Cable For Target Disk Mode?

Feb 18, 2012

I'm using a Late 2010 27" i5 iMac and a Late 2009 15" MacBook Pro. I'm going to reformat and reinstall the iMac this weekend but need to grab all my Music/Documents (you know the drill) from it. Last time I did this, I did it over a 100mbps network, needless to say it was absolutely horribly slow. So, today I'm going to pick up a cheap-ish firewire cable and target my laptop as a disk using target disk mode. 

Which type of Firewire cable do I need to buy? It's either a 4-pin or 6-pin choice, no 9-pins available at the shop I intend to visit. I have no idea what the difference is between them - hardware is definitely not my game. Both ports look like this (taken from Apple's docs, Firewire 800):

Info:
iMac, Mac OS X (10.7.2), 27" Quad, 2010

View 6 Replies View Related

OS X V10.5 Leopard :: Can't Boot By Firewire Target Disk Mode Etc

May 5, 2012

I have a bit of a problem: I cant access my Mac because I lost the password. I recently changed my passwords on several macs, including an old PPC PowerMac G5 from ca 2005. I run 10.5.8 on this and it works flawlessly. I need to use this machine for important work.   

So this is what I have tried so far: 

1) Tested with all known passwords I have used in the past.

2) Tried to boot from a 10.6 install DVD

3) Tried to boot from just C and later Command C

4) Tried a different install DVD 10.4  (I dont have the original 10.5 DVD)

5) Tried to use T and Target Disk Mode from an iMac with Lion. (disconnected all other FW disks etc.)

6) Tried different Firewire cables

7) Tried different Firewire connections. 

It starts obediently and show every sign of Mac-Happiness. But I simply can't get the darn thing to boot. I think it normally should have booted using 10.6?  

View 3 Replies View Related

MacBook :: No FireWire Cable For Target Disk Mode

Aug 31, 2014

I have an original MacBook1,1 running Snow Leopard 10.6.8. It will not start up, I have tried everything on this Apple web page , Mac OS X: Gray screen appears during startup, besides an erase and reinstall and I don't know what to do. It won't read the Snow Leopard update disk (My other two Macs do). When I restart In Verbose Mode, it always stops right after 'Airport: RSN handshake complete on en1'. When i started my other Mac in Verbose Mode, after 'Airport: RSN handshake complete on en1', it went straight to the login window. I called Apple support and they said that I need to perform an erase and reinstall but first I need to get an install disk for Mac OS X Tiger 10.4. and get some things off using Target Disk Mode. I do not have a FireWire cable and do not want to have to go and buy one. I have an Ethernet cable and a male - male USB cord. The two other Macs that I have are an iMac7,1 running Snow Leopard 10.6.8, and a MacBook6,1 running Mavericks 10.9.4.

Info:
MacBook, Mac OS X (10.6.8)

View 1 Replies View Related

IMac PPC :: G4 Doesn't Show Up On Host When Started In Target Disk Mode?

Jun 13, 2012

First thing to say is that the G4 starts fine (remarkably quickly in comparison with the new iMac) and appears to run okay. However, on running the disk utility I’ve found that there is a problem with the hard drive and it won’t verify either the hard drive or repair the permissions. Like many of its kind the optical drive has failed and therefore I can’t use the installation CD to reinstall or anything else. My daughter has been using the G4 for some years but has upgraded to MBP and wants me to take her files and put them on another hard drive and then wipe the G4 clean. At the moment the disk utility will not work at all. So I’ve been attempting to start it up in TDM via FireWire. The G4 starts up okay in TDM (the FireWire symbol appears on the screen) but there is no sign of it on the new iMac. In the light of what I’ve said so far does it seem probable that I will ever be able to get the start-up disk to work? I have connected the two computers via a Wi-Fi network and have been able to see the disc but when I have run the disk utility it has always reverted back to the G4’s own program.

Info:
iMac, Mac OS X (10.7.4), 24" Late 2009

View 5 Replies View Related

PowerPC :: IBook Shutting Down In Target Disk Mode?

Dec 11, 2006

I'm trying to zero the data on an iBook hard drive before selling it. When I connect it to my Powermac via firewire in Target Disk Mode, it shuts down completely about 30 minutes into the proceedure (and yes, the power adapter is connected).

This has now happened 3 times in a row.

View 4 Replies View Related

PowerPC :: IBook Won't Start In Target Disk Mode?

Nov 23, 2008

I've got an early '08 MacBook and an iBook G4. The iBook will only work for a few minutes before freezing completely.

I want to use my MB to get info off the iBook, but when I follow the instructions to start the iBook in Taget Disk mode, the MacBook asks if I want to 'initialise' the harddrive. What's that about?

How can I get the data off my iBook (ideally without re-installing the OS)?

View 3 Replies View Related

PowerPC :: IMac G4 Won't Boot Into Target Disk Mode?

May 12, 2010

I just bought an 800 MHz iMac G4 , and whenever I try to boot into target disk mode it shuts itself down. I am connecting to an intel iMac, and the g4 has no OS installed on it (I am trying to install tiger using my dvd install dvd, the one with the black background and grey x which the G4 won't read). Does anyone know what could be causing this issue? I've already tried reseting the PMU and PRAM.

View 11 Replies View Related

PowerPC :: G4 Will Not Boot After Using Target Disk Mode Connected Intel IMac?

Feb 3, 2006

We have some new Intel iMacs and have transferred some information from our previous G4 PM (one MDD and one Quicksilver) to the new iMacs. For some reason the G4's will now not boot up and kernal panic on the gray Apple boot screen. This has happened to all the G4's we have in our office. They are running OSX 10.2.8 and the iMacs are running OSX 10.4.4. We can still mount the drives from the G4's using FireWire Target Disk mode.

I have tried zapping the PRAM etc but they still wont boot. I have also tried running the OSX 10.2 Installer disks to try and reinstall OSX on the G4's but the installer cannot see the drives?

I tried running the disk utility. It finds the hard drive but wont let me verify/repair permissions (the option is grayed out). It will only let me verify/repair the disk, but it finds no errors. The installer cannot find the disk at all.

We have more than one hard drive in the G4's and the target disk mode will only mount the system drive, it doesnt see the others, so we cannot retrieve out information. Whats going on. Never had this problem before.

Anyone have any idea what is wrong. Never had this problem before using the FireWire transfer.

View 5 Replies View Related

Windows On Mac :: Installing Windows 7 In Target Disk Mode?

Aug 31, 2010

I am trying to install Windows 7 on my 24" iMac. But the DVD drive it playing up and is not accepting the CD. I am wondering if there was a way I could use my Macbook to install it over Firewire or something similar ? Even USB ?

View 3 Replies View Related

PowerPC :: IBook Display Stopped Working / Boot IBook Via Target Disk Mode?

Aug 13, 2010

I have a G3 iBook and just the other day the display stopped working. There were no signs of the display going bad, it's just went. Am I able to boot the iBook via Target Disk Mode on my PowerBook and run the iBook Hardware Test CD on it? Also, can I reboot my PowerBook and choose the iBook as the startup volume?

I know how to do Target Disk Mode but the latter I'm not sure about.

View 19 Replies View Related

OS X :: Won't Work With Kernal Panic / No Safe Mode And Target Disk Mode

Jul 6, 2010

I have a 15" mbp with 10.6 Intel core duo, 4gb ram with a boot camp and ubuntu partition through parallels. The other day I was installing xcode from apple's website, which failed 3 times after downloading saying the package couldn't be expanded. I left my computer for a while and came back where i then had to log in again. it rejected my password numerous time (i'm positive it was correct). when i restarted my computer i got a kernal panic screen when the apple logo came up. it told me to restart the computer which i did. didn't work. i restarted with the osx cd to use the disk utility. when it checked the drive it found a bunch of errors, which i then tried to correct. it went for a couple minutes then told me they couldn't be fixed and i should try to back up my data and reinstall osx. i don't know how to back up my hard drive when i can't log into my account. i've tried to boot in target disk mode and copy some files that way, but the only disk the other computer sees is my windows partition- no mac partition.

i've also tried these, none of these have worked: restarting in safe mode resetting the ram and pram booting with different sticks of ram all result in a kernal panic.

my windows partition still works fine though (as much as i hate to say it) the only things I really care about on my computer are my files from school and my itunes library. is there any way i can get these files off my computer?

View 2 Replies View Related

OS X :: Firewire Target Disk - Snow Leopard Install

Aug 28, 2009

I have a Macbook Pro with an inoperative slot-loading Superdrive. I purchased Snow Leopard today, planning to use my Mac Pro w/working Superdrive in Firewire Target Disk Mode to install the OS on my Macbook Pro. I can mount the Snow Leopard install via TDM, but the installer informs me that I cannot install Snow Leopard from "this volume" (presumably because the Target Disk Mode connection isn't recognized as an optical drive?). I've also tried to use "Remote Install OS X," but because my MBP is not an Air, it doesn't have the necessary firmware to select a network boot on startup by holding Option. Am I out of luck until I get access to a firewire external DVD drive?

View 7 Replies View Related

OS X :: Using The Console On A Slave Disk In Target Disk Mode?

Mar 19, 2010

Trying to troubleshoot a macbook pro 2.4 ghz with c2d so I start it up in target disk mode connected to my imac. (The current issue I am having are kernel panics on start up asking me to power off and restart). I am trying to see what the console output for the mbp is, but when I choose the mounted disk and go to applications there and run console, I get the console messages of my imac? What am I doing wrong guys?

edit: for the time being I ll just restart it in verbose mode, see what I get from that.

View 5 Replies View Related

OS X :: Pc Can't See G5 In Target Disk Mode?

Jul 16, 2010

this isnt fully a mac problem but my windows 7 laptop cant see my g5 in target disk mode any ideas how to make it work? i have macdrive installed so even the hfs hd should show up

View 1 Replies View Related

MacBook Pro :: FireWire Target Disk - Computer Won't Boot - Data Specialist?

Dec 13, 2010

I have a friend who's oldish-Unibody MacBook Pro started giving him the folder with question mark-flashing symbol on boot-up. I guess it could be PRAM, but in any case, he wants to get his data off the hard drive. The computer wouldn't boot up from the install disk (holding 'c' on boot), all I have managed is to put it into Target Disk Mode, with my own MPB. The funny thing is, that it works, but all that mounts on my computer is the Install Disc (in his disk drive) and his hard drive shows up in my disk utility (see below), but it will not mount, and if I try to repair it, it gives me an error and DUPLICATES the original 'root' drive. Does this mean the hard drive itself is damaged and we need to go to a 'data specialist' to get everything off or is there anything else I could try?

View 2 Replies View Related

Mac Pro :: Target Disk Mode Will Not Mount?

Apr 27, 2008

I need some pictures from my g4 digital audio onto my macbook, so I started the power mac up in target disk mode with the firewire cable attached, and it didn't mount. I have restarted both computers, and still the disks don't show up in disk utility. Could I have a bad cable, or is something else the problem?

View 1 Replies View Related

OS X :: Migration Via Target Disk Mode?

Jul 18, 2010

I'm purchasing a new MBP and I'd like to migrate my files using target disk mode, rather than Migration Assistant. Are there any good support articles online that outline best procedures for doing this?

Transferring my documents should be pretty simple, but I just want to make sure that when I transfer my iPhoto/iTunes libraries and the like that I'm transferring the right files to reconstruct those libraries, without transferring over any old files that are unnecessary from my previous system.

View 1 Replies View Related

MacBook Pro :: Usb 3 Target Disk Mode?

Jun 30, 2012

Is it possible to boot a macbook pro retina using an external usb3 hdd (=hdd of my previous macbook pro), and boot via target disk mode, so I can carbon copy everything to the flash memory of the new macbook ? 

In principle it sounds simple, but does anyone know if it can really happen? Can it boot from usb3 in the first place? (it's faster than usb2 and fw800 so I don't see why Apple wouldn't support it). 

It's important to find out before I go ahead and buy the new laptop.

View 2 Replies View Related

OS X :: Target Disk Mode Not Mount Any Drives

May 12, 2007

I thought having a Macbook and a PC and keeping data sync'd between the two would be easy, or so Apple et al would have me believe. So far I've not only found out that their IP over FireWire, the only feasible way to transfer the large amounts of data I have, is seriously lacking (i.e. I haven't been able to get it to work!) but also that when I try to ease my woes by connecting the Macbook as a FireWire drive in Target Disk Mode, it fails to deliver again. The first time I connected my Macbook to my PC over FireWire in Target Disk Mode, it popped up in My Computer no bother. Alright, so the only partition I could access was my XP partition on the Macbook (thank goodness I have that or I'd be right up the creek!), but I suppose it's to be expected, what with OS X and Windows having different file systems ETCETERAH.

So I'll copy all my media files to the XP partition and then copy them to my XP PC from there, I thought. Every following time I've connected in Target Disk Mode, I've received nothing but a 'removable disk' icon in My Computer which, when clicked, asks me to 'insert media'. WTF, Apple?! So not only can I not have my OS X drive show up in Windows on my PC, but now I can't even have the XP drive show up?! I didn't change anything, I didn't do anything differently, I literally just rebooted OS X to copy the files I wanted from the Apple partition to the XP one. Sorry to come across all 'angry like', it's just not the first, second, or third problem I've encountered since 'switching'. For a company who prides itself on how its products 'just work', it's becoming an eye-opening experience. However, I understand it's probably something I've done incorrectly, rather than the fault of Apple or Microsoft. So I ask you, what am I doing wrong?

View 3 Replies View Related

OS X :: Booting Up From A Computer In Target Disk Mode?

Jul 12, 2008

I'm just curious if it's possible to put my Mac Pro into TDM, connect it to my MacBook Pro, start it up holding option to choose a start-up disk, and use the Mac Pro's HD to boot up. I'd experiment myself, but the Mac Pro is packed at the moment, and I'd like to know if anyone knows for sure that it will or will not work before digging it out.

View 11 Replies View Related

OS X :: Can We Boot USB Target Disk Mode Into New MacBook

Oct 22, 2008

Can we target disk mode through usb 2.1 into the new MacBooks?

View 6 Replies View Related

OS X :: Hard Drive Using Target Disk Mode?

Aug 29, 2009

I want to use my MacBook (10.4) as a Hard Drive using target disk mode.

I am connecting it to my Mac Mini (10.5).

It is not showing up on my desktop.

View 8 Replies View Related

IMac PPC :: Installing OS 10.4 From DVD In Target Disk Mode?

Apr 14, 2012

I have a iMac PPC and a iMac intel. Can I install OS 10.4 from a DVD in the intel iMac running Snow Leopard to the iMac PPC in target disk mode?

Info:
iMac, Mac OS X (10.5.8), PPC G5

View 13 Replies View Related

Intel Mac :: Can't Exit Target Disk Mode

Jun 14, 2012

I tried to login to my brand new iMac (running Lion 10.7) via Target Disk Mode so as to transfer my data from my old machine. However, the passwords didn't work. This is not a disaster, however, I am now unable to exit Target Disk Mode. I have tried removing RAM and restarting holding down alt+cmd+R+P to reset the PRAM but it just goes straight back to Target Disk Mode. No matter whjat I do it goes back to Target Disk Mode with the padlock and opassword box.

Info:iMac, Mac OS X (10.7.4)

View 7 Replies View Related

PowerPC :: Using Target Mode With Older G4?

Oct 23, 2006

Ok well i got my mac pro and i want to target disk all my old documents over from the second hard drive, that is not the boot drive. On my power book when i did target disk mode both hard drives showed up but on my mac pro only the boot drive showed up. Is there a setting or something i'm missing? What can i do to fix it?

View 2 Replies View Related

MacBook :: How To Get System Profile In Target Disk Mode

Jul 30, 2009

I need to get an iBook G3's system profile (CPU speed, memory, drive config., etc.), but have no video (black screen). Hard drive is ok. Can this be done in Target Disk Mode somehow? I have NO external monitor.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved