I recently got a new hard drive and I want to install Mac OS X 10.5 and Windows XP on it.
Is it possible to format one partition with the Mac GUID for OS X and the other partition as a Master Record for Windows XP?
Or does Mac OS X/Windows XP dual-booting has to be done through the bootcamp?
I'm currently in the process of trying to install Win7 on my Macbook Pro (purchased July '07) using an ISO burned to a DVD with Disk Utility. Unfortunately, the DVD isn't bootable, and while the symptoms match what's in this blog post, the author's solution involved using a Windows-only program.
I'd like to know if it's possible to re-burn the ISO without the version number in the filenames as in the original solution, but with Disk Utility or something else that a Mac can use.
I have been trying to burn a .cdr file to a dual layer dvd using Disk Utility. I got it to work once, but I tried four times. I think that it must be very sensitive or something, because I can't figure out any other factor that affects it.
Has anybody else run into this problem, and if so, what's your solution? I think it may have to do with vibrations of the disk drive or something, but I would be lying if I said I knew that for sure...
I have a MacBook 4,1 with Intel Core 2 Duo processor 4GB Ram. It is taking over 10 minutes to boot up past the gray apple screen when I turn it on. First I cleared the PRam (?) then I checked the disk using Disk Utility Verify, and it said the disk needed repairs. So I ran the disk repair and it said it was unable to fix the errors on the HD.
I did a little research and tried booting into the Single User mode, then running /sbin/fsck -fy. It said that it found errors but could not fix them. I ran it two more times as suggested and got the same result each time. I then tried rebooting and now instead of taking 10 minutes to boot up, it takes about 5 minutes on the gray apple screen and then just turns off. I started in Verbose mode to try to troubleshoot the error and it appears the last thing to come across the screen before power down is a message "Apple Yukon 2: RxRingSize <= 1024....etc".
I decided next I would run the Apple Hardware Tester. The test came back with an error code "4SNS/1/40000001:IG0C-0.265". I am very good at searching the web but I could not find any errors that had the IG0C or IGOC or any combination at the end, but plenty of 4SNS/1/40000000(1) errors with different endings. From what I can tell people are saying anything with 4SNS/1/4000000 is a logic board failure, but this computer was literally just booting this morning until I did the /sbin/fsck -fy.
Info:
MacBook, Mac OS X (10.5.6)
I had windows vista installed but suddenly the audio decided to become faulty, after spending a day trying to fix it i realized I have a windows 7 install disc so i might as well just replace vista with windows 7. I didnt take care of vista or ever register it so it became quite a task to upgrade so i just deleted the partition and went to create a new one and just do a full install of windows 7.
I made the partition but the wrong format, so i removed it through boot camp assistant and created another, except now it keeps giving me the "back up the disk and use disk utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using boot camp assistant again" Now, I'd love to do this, except I have no idea what I'm doing and WHY this error has occured. After becoming frustrated I switched from my imac to my macbook pro and received the same error when trying to create a partition. So any help on exactly what I need to do would be a HUGE help. I only use windows for music production (I know, seems backwards, but I use Sony Acid and FL Studio so I'm stuck with Windows)
I am having an issue Partitioning my Internal HDD because some files cannot be moved it was able to Partition a while back when Installed Vista but I deleted that Partition as I needed a bigger one for Windows 7 Beta It says I need to "Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume." does that mean I have to reformat my entire HDD? as I don't want to do that.
View 1 Replies View RelatedI'm running 10.5.7 and Boot camp - is there any way to force my Mac to always ask which disk to start up without always having to hold the option key?
View 1 Replies View RelatedI need to boot into Disk Utility to repair my OS X partition but don't have my Snow Leopard install disc with me. I tried using a Leopard disc from my previous computer but got a gray screen when I tried it. Is there a way to create a new CD that will allow me to access Disk Utility from startup?
View 5 Replies View Relatedso i got this message "Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again." what do I do
View 3 Replies View RelatedI have used bootcamp to partition my disk and install windows vista onto my uMB. Now I want to partition the disk again to create a tri boot setup where I can either install ubuntu or the dev preview of snow leopard (I haven't decided yet). Can I just do this with disk utility and shrink my OS X partition in order to create a new partition or will this cause problems with the disk? I would really like to not do a fresh install of OS X because I have had to do this twice to fix disk problems relating to bootcamp.
View 12 Replies View RelatedWell this is an ongoing saga with my iMac. Looks like my third hard drive has gone south after 4 years. All Seagate Barracuda drives. But now I can not even boot from the the snow leopard dvd to at least run the disk utility. I tried the following: holding down 'c' and nothing, hold down options and I get the mouse cursor but nothing else.
View 2 Replies View RelatedYesterday I decided to Install Windows Xp on my Mac. I tried to partition it but BootCamp said, "Verifying failed. BootCamp can't partition disk." So I started reading about this problem on the Internet and I found out that I have to use the Mac OS X Installation Disk and use the Disk Utility to "Repair" the disk. I started Disk Utility and clicked "Repair". Many files were missing so it tried to repair it. So now when I start the Apple-logo and the loading-circle is "frozen", so it just loads and loads and loads and loads, and nothing happens. I decided to format the disk from Disk Utility but I can't format it! I can't do nothing! So now I cant start my Mac! If it is possible to take a backup or something before I format it, or keep the files it would be lovely!
View 1 Replies View RelatedI made a partition in my Tiger Macbook to install WIN. Now i want to delete the partition. Tried to do that with Boot Camp, and the application says it' done, but the partition is still there. Tried with Disk Utility, and I am not able to click the "Remove" button (as on the image).
View 1 Replies View RelatedI deleted my Boot Camp partition in Disk Utility (as usual, Windows wasn't working and wouldn't fix). I resized my Macintosh HD partition to cover the whole drive and repartitioned. Now Disk Utility says that the partition's capacity is 160 GB and that I've used 40 GB and that 70 GB is available. My Boot Camp partition was 50 GB. I've read that to fix it I have to boot from my install DVD, go to Disk Utility, set the number of partitions to one, and delete the entire drive so that there's zero data left. Then I'd reinstall OS X and restore from a Time Machine backup. As of now, I have no external hard drive.
View 2 Replies View RelatedI used Carbon Copy Cloner to back up to an external hd. Do I now erase the hd reistall the mac os, then pull my files and apps fom the ext hd?
Info:
imac 24", Mac OS X (10.5.6)
Problem: MBP frozen on boot up screen with Apple logo and turning gear (which freezes after a while aswell)
Solutions attempted: disk repair via custom recovery- disk utility, PRAM
Device: MacBook Pro 15" (early 2010) running 10.9
Additional info-
Never had any issue with the device and this seems to have happened all of a sudden. Installed an SSD a few months ago, and just realised the ssd did not have a recovery partition. However I connected my older hardrive via USB to access recovery which seemed to work fine.
NOTE: for the past few weeks, every now and then I was unable to power the device off and whenever this occurred, there seemed to be a few bugs (ie unable to empty thrash-error 50 and enable to increase/decrease volume/screen brightness). However, holding the power button and restarting it seemed to have fixed it.
Had the same issue but this time around MBP failed to boot up.
Info:
MacBook Pro, OS X Mavericks (10.9.3)
Is there any way I can boot up my external hard drive as a start up disk along with my internal hard drive?
View 3 Replies View RelatedI am willing to either dual boot windows 7 and mac os x on a computer i just built with i7 processor or just install mac os x on that computer. I have download iatkos v1.0 and snow leopold. the computer can boot on either one. My problem is after I selected the language I was asked where I wanted to install the program,I was stuck there.
View 2 Replies View RelatedI am happy with my MBP and I have an old laptop running XP . I want to know why one should dual boot . And waht methods can be adopted to dual boot Mac OS X snow leopard with windows 7 .
View 12 Replies View RelatedI have bootcamp with Snow Leopard and Windows 7 in my macbook (latest white one).
I mainly use Snow Leopard.
Both OS are working fine until I restart my mac in Snow Leopard yesterday.
After starting song appeared and it directly go to Windows 7.
I pressed Option (Alt) key and chose Snow Leopard but it still go into Windows.
I even changed boot option in Windows > Control Panel > Boot Camp Option to OSX but it doesn't work.
At the moment I have Windows 7 32 bit OS. I've always wanted either an iMac, or atleast the Mac OS. I've recently found out it's only £20.99, and i've always thought it was a lot more than that, which is a bargain! The only thing which is stopping me from buying it at the moment, is that certain programs which I use reguarlarly won't work on Mac, and I really need those programs. Is their anyway I could dual-boot it with Windows 7, so I give Windows 7 say only 8gb of my hard drive, and Mac the rest?
Info:
Windows
7
Is a usb keyboard needed to switch between OS X and Windows in bootcamp when holding down the option key, or should the Apple bluetooth wireless keyboard work as well?
View 11 Replies View RelatedI plan on purchasing a Mac Mini server in the upcoming months and I'd like to be able to dual boot Windows on it when I need to. However the Mac OS Server (as far as I can tell) doesn't come with the Boot camp utility. So here's my conundrum: Do I ignore the server version of Mac and install Snow Leopard client with boot camp assistant or do I just use Disc Utility to create a second partition on one of the Mini drives and install Windows like any other computer? and keep using the server version of Snow Leopard?
I guess what I;m asking is which of these is the better option?
Installing Client and using Boot Camp Utility?
Or Creating a Partition manually and installing Windows on that?
(would my second option even work and would installing boot camp drivers after that process do any good or would it just bunk the Windows install?)
I have a Windows Ultimate DVD. I want to make a back up of it and use this DVD when I need to install Windows on my machine. If I make a disk image of this DVD and then burn the image back to a DVD will it function or do I need another tools? ( like toast )
View 1 Replies View RelatedI've a lot of files in Mac and my time machine back up drive now. Since most of my files are spreadsheet, doc, MP3 files and they can inter use in my Mac and Windows 7 PC. There are 4 Mac partitions and one PC partition in Mac Disk utility I can use. Do you know which partition I can use and Windows 7 PC will see them. In this case, I can just use that partition transfer the files form Mac to PC?
View 2 Replies View RelatedI just recently bought my first macbook pro. I had a 500 GB WD elite passport drive. I partitioned it to Mac os extended (journaled)- for time machine and FAT for windows and mac file transfer and storage. I used disk utility to partition the drive. These two drives are detected in my mac, however when I plug in the external drive into my windows- no pop up appears telling me to open files. So I go into my computer and click on the (F) drive in my case. Windows vista then proceeds to tell me the drive must be formatted before it can be used. What problem do I have. All I want is 2 partitions one for time machine and another that will allow for data transfer and storage. I have looked but cannot seem to find and answer. I have a 160 gb hard drive, what amount of space do you recommend for the time machine partition.
View 4 Replies View RelatedI was burning an ISO to a dvd in Disk Utility, and it gave me the message "Verification of the burn failed" So, I tried running the dvd, and I didn't get any error messages. Do you think the disk/iso/whatever is good to use?
View 5 Replies View RelatedBy using boot camp, I finally managed to install XP on my Macbook Pro. I can extend the monitor but the problem is that the extended monitor is in Black&WHite and totally jagged/off centered. I tested the adater and the cable with other machine and they work fine, so definitely issue is not the cable and the adapter. I really need to use Dual monitor for some software that I use on XP, so this is really really important to me.... My MacbookPro is 2.16ghz with 2GB of RAM, and the video card is ATI Radeon X1600. Maybe I need to install different driver for the card? If anyone has done the same please please let me know exactly how you did it
View 18 Replies View RelatedI have an Intel Macbook with 10.4.11 running, and I wanted to upgrade to Snow Leopard. I've heard that the $29 upgrade disc will work with 10.4, and I have a couple questions.
1. I lost the original 10.4 install disc that came with my computer - would that be a problem?
2. I'm in a college CS program, and I'd like to be able to dual boot Windows onto the laptop. I think in order to do that, I have to do a clean install of OS X after installing Windows - can I do that with the upgrade disc?
I am a complete n00b when it comes to OSX just to warn you lol. Im just wondering, if one did a dual boot of windows alongside OSX, is it possible to access those files on the windows partition from OSX and likewise, is it possible to access those files on the OSX partition from wndows? Also, will Time Capsule only back up files from OSX or from across the whole mac? Sorry if this is a stupid question, as I am looking into buying a macbook and was wondering if this is possible.
View 2 Replies View Related