My husband and I bought the family edition of Leopard last night, along with iLife08. I installed iLife while he installed Leopard. No problems on either Mac.
However, when I went to install Leopard, once I double clicked to start the install, it seems like my Mac won't "read" the disk. I get the spinning rainbow and there's lots of chugging sounds happening, but after almost an hour (yeah, I'm patient), it was pretty apparent that nothing was actually happening.
I'm really perplexed...it's not a disk problem, as it installed fine on my husband's Macbook...and it's not a drive issue as iLife installed just fine a few minutes before trying Leopard.
I have an old Macbook via 2007 and I'm trying to update my operating system (currently OS 10.5.8) to Snow Leopard, but the disk is not reading in the disk drive. And unfortunately, Snow Leopard is only on a DVD, it can't be downloaded.I figure I have 2 choices:
1) take it in and spend $49 to have them do diagnostics and then tell me they probably need to replace the superdrive
2) I could buy an external optical drive. But I would need to know which one would be compatable with my old *** Macbook.
When i put in my Leopard install disc and hold the option key to boot from the disc, my macbook pro spits the disc back out. It will not load it. So i took my Tiger install disc and booted it and completely erased and repaired my HD. But still my macbook will not boot to the Leopard disc upon startup. It simply trys to load it, then sends it back out.
I just got my 2008 Mac Pro. I will also be buying a used MacBook Pro with Tiger installed. Will my Mac Pro Install Disc (with Leopard) work with my MacBook Pro?
I was trying to import a cd into my macbook pro this afternoon and it went in and clicked into place but then started making a huming sort of noise, but was you could hear it was not spinning, about 20 seconds later it ejected. I tried it multiple times and restarted my computer but nothing seemed to help. The disk drive isn't bent out of shape or anything and I've never had a problem with it until now.
Restore is where I got a little confused. I don't have the original Leopard Install disk which I'm pretty sure I need to restore.
BUT I what i need to know is if i could potentially just download a Leopard Install disk in the form of a .dmg file and burn it to a DVD and use that to restore?
I work in an office where we've picked up a few new MBPs. These machines have Snow Leopard and I'd like to install it on my machine running Leopard. Is there any way that I can install 10.6 on my machine using the Disks that came with the new machines?
I just bought a brand new 13 inch Macbook Pro. Is it possible for me to use the Mac OS X install disk that came with it to install Leopard on my June 2006 Macbook, which is currently running Tiger? I've attempted to do so a couple of times and have gotten an error message.
While upgrading from Tiger 10.4 to Snow Leopard 10.6 (Mac Box Set purchased from apple store) on my macbook pro the installation process froze up. Tried several times with same outcome. Even wiped the disk & reinstalled original software (tiger 10.4). No disk repairs necessary. So starting with a clean slate snow leopard still wont make it through the installation process.
My HDD died recently and I cannot get booted into OS X. It just hangs on the grey screen with the apple. I am (was) running 10.6.8
I am having a lot of trouble trying to boot from my install DVD. First of all I purchased a new HDD which came with Lion pre-installed on it. This worked fine, except when I tried to restore my latest time machine back up it used up 200GB of my disk space but nothing is restored? No doucments or music anywhere, photos, nothing. There is no change at all except half my storage has disappeared. I had posted another question on here and the reply said to use setup assistant, which I could not locate in Lion?�I then tried to install Snow Leopard back over Lion but it would not let me. I tried to boot to the install disk but it just hung at the apple screen again.
I gave up and bought another brand new HDD but it won't recognise it on boot up. I just get a flashing folder with a ? in it. I tried to boot into the install DVD and again it wouldn't do it.
I then went back to my original HDD, and tried to boot to the install DVD from that (I hadn't tried this first off as my install disk was elsewhere and I purchased the Lion HDD as a stop gap measure) and it STILL wouldn't do it? This is now the original disk with the original install DVD (10.6) issued with my macbook pro when I purchased it and it will not boot to the DVD. Why why why?! It is almost enough to make me bin the lot and switch to windows.
My son made me a DVD-r of mp3 files and a dvd on his new mac. I cannot get it to read on my system. Other CDs and dvds work fine so know disk drive is ok. I have tried the disk on windows based computers and it works fine. Is my computer too old to read or do you have a suggestion on how to read? When I insert the disk, nothing comes up on the desktop to click on to read.
this isn't an isolated issue - there are threads about this over at Apple and InsanelyMac: I'm unable to install Snow Leopard. When I run the installer, it'll tell me that "Mac OS X cannot be installed on "Macintosh HD", because this disk cannot be used to start up your computer" (Macintosh HD being my OS X volume, obviously). I'm seeing this issue on a relatively new 1.8ghz Macbook Air with a 128gb SSD - however, as far as I can tell from the other threads, the problem also affects iMacs and Macbooks.
Some people apparently attributed the issue to a PGP installation they had on their harddrive. Others found a file called backup.backupdb in their root - deleting it fixed the problem. However, most people don't have any of that installed on their computers and the upgrade still won't work. - if anyone has found a solution to the issue, please let me know :-( I'm stuck here. I don't have an external drive for the MBA and booting from a network drive has never worked on this particular machine - so I can't do a clean install, either.
I have a Macbook Pro with an inoperative slot-loading Superdrive. I purchased Snow Leopard today, planning to use my Mac Pro w/working Superdrive in Firewire Target Disk Mode to install the OS on my Macbook Pro. I can mount the Snow Leopard install via TDM, but the installer informs me that I cannot install Snow Leopard from "this volume" (presumably because the Target Disk Mode connection isn't recognized as an optical drive?). I've also tried to use "Remote Install OS X," but because my MBP is not an Air, it doesn't have the necessary firmware to select a network boot on startup by holding Option. Am I out of luck until I get access to a firewire external DVD drive?
I've been a long time lurker on these forums and you've helped me out numerous times when my computers decided to stop working.
I got my Snow Leopard disk in the post today but unfortunately my disk drive in my Macbook Pro seems to finally be well and truly knackered.
I should be able to borrow a usb/firewire disk drive from a friend, so would I be able to install ok from this external drive, and is there anything I would need to mess around with to make it work?
So I just bought Adobe Production Suite via Adobe's Education site. It doesn't run well on Snow Leopard at all. So what I decided to do was to use my Mac Mini to run AE in leopard. But the only disk for leopard I have is the one that came with my 13" MacBook Pro. Is it possible to install Leopard on my Mac Mini with the Install Disk that came with my MacBook Pro?
I have an early 08 MBP that shipped with Leopard. I upgraded it to Snow Leopard quite a long time ago. I feel like doing a clean reinstallation but my Leopard disk is spoilt.
Is it possible for me to do a brand new clean installation just using that Snow Leopard upgrade disk?
I am trying to upgrade from leopard to snow leopard on my MacBook Pro. However, every time I insert the install disk, the machine whirs for a moment, and then ejects the disk with no error message. I tested my drive with a different dvd and it works just fine. All of my other software is up to date.
Info: MacBook Pro (13-inch Mid 2009), Mac OS X (10.5.8)
Hey guys, I was just wondering if its possible for me to upgrade to snow leopard using the 10.6.7 grey install disk? A friend of mine is willing to lend me his but I'm not quite sure if it can. So my question is, can I use his grey install disk with version 10.6.7 to upgrade to snow leopard or do I need the retail snow leopard disk?
I have cracked my OS X 10.6.4 install disk, (which, it seems to mean that my iLife application disk wont work either). Is there any way to get a replacement? I don't always live near internet access, so Lion isn't really an option.
Basically, my friend got his new MacBook Alu for Christmas, but currently all the hard disk is doing is reading constantly, even when he has nothing running.
I have noticed a lot of disk activity reading and writing, it maxes out in bursts up to a couple of minutes at a time and overall seams to be reading and writing a lot of the time, with no processor activity at all. There is no obvious culprits in the activity monitor but terminal displayed large number of read and writes for mds, but spot light is not indexing (no dot in Mag glass) and this has been happening from months now.
Possibly longer noticed it when recieved replacement drive due to crook seagate, may have been doing this but could not hear it. Running last Snow Leopard on iMac 27 mid 2011 i7 custom with 8 gb of ram. also should note this unit has had load of issues Bad Ram, some software problems would not sleep (software) none of which have ever manifested on any of my other (older) macs. Also have noted that this drive activity does seem to coincide with using safari on occasion??
I have replaced may Snow Leopard Family pack and have found that the replacement disk is also faulty. It stalls at around 40 minute mark and does not install. I have confirmed a general problem from two store sources. I also have similar problem with copies i bought from US. There is a noticeable defect along the outside edge of disk and swirling to a coma form of about a centimeter. Seems like a quality control issue at the disk creation instead of information burning. I have had no problems with the single versions of the OS.
I was upgrading from Tiger to Snow Leopard (I asked a worker in the Apple store and he assured me it was okay to do so) and about 15 minutes into the installation I got a message saying "Unable to install. Please retry". Then when I retried it says "The contents of this disk can't be changed. Mac OS X couldn't be installed on this disk."
I have a black MBP and it is Intel based and I fit the system requirements
