Software :: FireWire Not Detected In IMovie
Mar 15, 2008
I have an old JVC GR-DVL920U digital camera and am attempting to connect it to my (new) macbook with a firewire..iMovie does not detect any camera connected. I initially attached the cable to the camera, then into the firewire port, then turned the camera on to VCR mode. When that didn't work I tried restarting the camera, unplugging and plugging back the firewire and even restarting the computer with the firewire plugged in.
The computer is not detecting and device being plugged into the firewire port. I even tried with a USB and didn't capture any detection. My still digital camera (Canon SD1000) plugs in with the USB and has no problems, my (old) ipod shuffle plugs directly into the USB port and there are no problems.
View 6 Replies
ADVERTISEMENT
Mar 30, 2012
i have mac mini. I connect a video camera to my computer via firewire. i try capture video in fcp and imovi, but firewire not detected. when i open imovy and import video, then show the massage "camera not connected".
Info:
Mac mini, Mac OS X (10.7.3)
View 7 Replies
View Related
May 23, 2008
Is it possible to get Imovie (or anything else) to recognize my NV-EX3 camcorder (on OSX) via FireWire? NV-EX3 works fine on all PC's, browsing forums and www and contacting MAC and Panasonic has not provided a solution, this seems to be impossible!
View 2 Replies
View Related
Mar 12, 2009
I need to import my movies via firewire, but can only do it through my brother's macbook, as my new macbook does not have firewire. Therefore, I imported 100 GB worth of movies onto his computer, then transferred the iMovie Events and iMovie Projects folders onto a hard drive, then transferred them from the hard drive to MY macbook. Now they are sitting on the desk top. How do I get them into iMovie on my macbook, now that I have transferred the files from my brother's macbook onto my macbook's desktop?
View 1 Replies
View Related
Feb 16, 2009
I currently have my second MBP that I got from Macmall and both in a matter of two weeks have had similar issues. The first I managed to get returned and replaced, that is a seperate and complicated story in and of itself. This particular issue started with a boot up sequence that was taking about 5-6 mins. After going through the drill with Applecare thought I could restore using Time Machine. That's when I found out that the FW400 port no longer worked to power my Oyen Digital 250G FW drive. Any thoughts as to what might be the problem? This is my second MBP and Oyen Digital FW drive. I had them both replaced!
View 10 Replies
View Related
Oct 12, 2009
I just got a Mac Mini (March 2009 model) and want to connect it via Firewire to my Sony TRV-22 camcoder. The camcorder has a Mini DV Firewire jack on it (I think this is called a 4-pin connector sometimes too). But on the Mac Mini, I can't tell if I need a 6-pin or a 9-pin. Can someone point me to a good cable so I can dump some MiniDV tapes into iMovie?
View 5 Replies
View Related
Jan 21, 2010
I googled it and it didn't help out as much. I have this Shure Mic and it has MIDI input and would like to have some kind of adapter to firewire. I know there is an USB adapter, but i would like to use firewire. It can be firewire 400 or 800. I like to record some songs for GarageBand.
View 3 Replies
View Related
Jun 22, 2012
can I put firewire connector 400 in the firewire port 800?
Info:
iMac, Mac OS X (10.7.4)
View 9 Replies
View Related
Sep 25, 2007
i need more firewire ports for my macbook, do they sell firewire hubs?
where can i find them?i googled for it, but it was very confusing, found a lot of USB hubs and some other stuff, but not a FIREWIRE HUB perse.
View 5 Replies
View Related
Jun 27, 2010
I have a somewhat old Seagate FreeAgent external drive (like this).
It has a switchable port controller, one has a USB2 and eSATA and the other has two FireWire 400 ports [URL].
Now, on the FW controller it says "Dual FireWire 400".
What is Dual FireWire 400? And does it implicate that I can use both ports together somehow and get FW800 by that?
View 5 Replies
View Related
Mar 6, 2008
Every time I open imovie it works well enough, until i try and record my voice. It automaticaly shuts down imovie, and really frustrates my teacher and I. It's imovie 4.
View 3 Replies
View Related
May 2, 2009
I love the old iMovie HD, and would like to keep working on projects with it. If I install iLife '09 , will it erase the old version of iMovie HD?
View 3 Replies
View Related
Jun 2, 2010
I have a very old purple iMac, circa 2000, with an old version of iMovie. I copied the files onto a USB and tried to open/import them onto my new Intel Core 2 Duo, 3.06 GHz iMac. However my new iMac with iMovie '09 won't recognise the files when I try to import them. They stay greyed, not allowing me to import them.
View 2 Replies
View Related
Mar 16, 2012
In iMovie how do I find out how big my iMovie is in terms of GB's? It seems to big to save to a cd disc, can I use a memory stick?
Info:
MacBook Pro, iOS 4.3.2
View 1 Replies
View Related
Apr 11, 2010
I recently purchased an LG Flatron monitor to use as my second display for my MacBook Pro (unibody). I had it working with great results for about a week, but today when I plugged it in, the monitor is not detected. I have been looking through other's problems trying many of the same things, to no avail. [URL]
View 2 Replies
View Related
Apr 22, 2008
I have a IDE Sony DVD RW DW-Q120A. It does not get detected in Leo, neither pre-installation nor post-installation. Also tried a friend's Sony DW-G120A, which works in his Leo but not mine. However, all DVD RW do work with IDE to USB.
View 6 Replies
View Related
Feb 14, 2012
For the last couple of month or two, my MacBook Pro hasn't always been recognising all of my 4Gb of RAM and only detecting one of the two 2Gb RAM installed.
I thought it might have been a hardware problem but I have been able to restart OS X when it only detects 2Gb and after it has rebooted it would see all 4Gb of RAM but recently (last week or so) when I restart this no longer happens and it still only detects 2Gb not matter how many times I restart.
The 4Gb of RAM installed is the factory shipped RAM and I haven't opened my MBP to make any modifications.
For some reason when I boot into Windows 7 through BootCamp it detects all 4Gb of RAM.
I am having real trouble running some applications that I need due to the fact that I only have half the installed RAM available.
Info:
MacBook Pro, Mac OS X (10.6.8), Intel Core 2 Duo 2.66GHz, 4GB RAM
View 8 Replies
View Related
Mar 24, 2012
I bought a 4-port USB hub (Gear Head if it matters) and it's supposed to just plug in and work. I normally use a USB mouse & keyboard, thus taking up 2 out of 2 of my MacBook Pro's USB slots. I bought the Hub so I could add in a light or speaker for late night gaming sessions and quiet videos respectively. The light on the USB Hub turns on, but it isn't detected by my MacBook Pro. Anything I plug in to it recieves enough power to turn on (Speaker's Power light turns on, Mouse's laser will turn on, etc...) but they aren't detected by the MacBook Pro. IE; Mouse won't move on screen, keyboard will not type, speaker isn't shown as an option for outgoing sound device, etc...
Info:
MacBook Pro, Mac OS X (10.6.8)
View 7 Replies
View Related
May 24, 2012
Installed a new Seagate Momentus XT 750gb into my mid 2009 mbp. When I tried to install my leopard the HDD was not detected.
So I put in the original HDD and installed leopard into the Seagate via USB with success. Prior installation I formatted the Seagate already.
Then I install the Seagate into the mbp again but still it cannot be detected.
Info:
MBP 2.8G Intel Core 2 Duo, Mac OS X (10.5.8), 4Gb RAM
View 2 Replies
View Related
Sep 25, 2010
Before my HP Photosmart C3100 worked fine with my Imac 27" i was able to print and scan without any issues. But lately after i haven't scanned for a while over the summer i tried scanning again and it always says NO SCANNER selected in the open scanner box from the print & fax panel from the system preferences. It prints fine but whenever i open scanner dialog box it says NO scanner selected? Why is it not recognizing the scanner part of the printer anymore?I tried uninstalling and installing the printer again didn't work
View 10 Replies
View Related
Sep 25, 2010
I have a western digital hard drive which I am using as backup it's setup with time machine but now when I connect that hard drive to other PC OR MAC it do not detect or sync and I want it to work on other computers how would I change that.
View 4 Replies
View Related
Apr 27, 2009
I have no effing clue what happen... I just rebooted my computer and then started having issues displaying on my primary and secondary monitors. At first primary monitor was not displaying but second was working... then vice versa... now I can't get second monitor working... I have no idea what to do...
I did the detect windows... recheck cables all work...nothing is hardware malfunctioning so its something in the software
You can see two monitors are detected in spaces but nothing displays
Again the monitor is working tested it on macbook and works fine... its software. Is there a reset monitor option?
View 3 Replies
View Related
Sep 16, 2009
My Mac Pro, used very little as yet in this life following a fortuitous acquisition from my former company, is failing to recognize one of the three hard disks. I have a 320 gb system disk running Snow L, and two 500 gb disks which are currently empty of data. Following boot, the second of the 500 gb drives isn't available - it doesn't appear on my desktop, or in Finder, or in the side bar when I launch Disk Utility.
The system profile information returns a single line saying there was an error when trying to detect information about my disks - it doesn't give me information on any of them. In its previous life this disk was a mirrored RAID array (with the other 500 gb drive) used a shared file server for standard office documents etc in what I would call a modest load environment - it was no media studio!
View 4 Replies
View Related
Feb 4, 2010
Using both smcFanControl and istat, I cannot get a reading on my fan speeds. I can hear my exhaust fan spinning, but these programs tell me it is always at 000 rpm. Also, I don't think the fan control is working, as I don't hear an increase in fan speed when I make adjustments.
Does anyone know how I can get these apps to recognize my exhaust fan?
View 5 Replies
View Related
Mar 2, 2012
my 3g dongle is not detected in both usb ports on my new mac book pro?
View 2 Replies
View Related
Apr 14, 2012
I'm running Mac OS X Lion (latest version) on a MacBook Pro mid-2010 model. OS X Lion was installed via recovery tools a few days ago. Today I plugged in a brand new Crucial M4 SSD via USB and it got detected. I restarted the laptop in recovery mode using cmd + R and chose to install Lion on the external SSD. For this I first had to partition the SSD before it showed up as a valid drive where Lion could be installed. The installation went almost to the end, but then stopped rather strangely for a very long time. So I decided to cancel the installation and restarted the laptop normally. Since then the Crucial M4 SSD is not being detected at all (doesn't even show up in Disk Utility).
Info:
MacBook Pro, Mac OS X (10.7)
View 7 Replies
View Related
Apr 29, 2012
Itunes only detected iphone but not ipad in the Device Bar. Both are connect to the WiFi. I would like to sync my Ipad through WiFi mode.
View 1 Replies
View Related
Jun 9, 2012
I have a MacBook Air and am trying via DVI cable to connect another display? The Mac will not detect the other screen. Any suggestions would be terrific. Do I need to "install" the old screen?
Info:
iPhone 4S, iOS 5.0.1
View 1 Replies
View Related
Dec 5, 2014
I have an early 2011 Macbook Pro 13 it was working OK but now has come up no batteries detected and I have tried a pram reset, smc reset and a new battery but still no luck. I did manage to get it to work for a while by turning it on with the power adapter connect then restarting it but at the point of the restart I pulled the power and it came on with the battery.
If I start it with the power adapter connected and then pull the power it will boot to the login screen briefly then go into sleep until I reconnect the power. When the power adapter is connected it just has a solid green light at all times never changes even if I do the smc reset.
Info:
MacBook Pro, OS X Yosemite (10.10), Early 2011
View 2 Replies
View Related
Jun 2, 2014
my mac wont' detect the battery and cannot be turned on unless it's plugged in. What should I do?
Info:
MacBook Pro, OS X Mavericks (10.9.2)
View 1 Replies
View Related
