OS X :: Detected - NO Scanner Selected?
Sep 25, 2010
Before my HP Photosmart C3100 worked fine with my Imac 27" i was able to print and scan without any issues. But lately after i haven't scanned for a while over the summer i tried scanning again and it always says NO SCANNER selected in the open scanner box from the print & fax panel from the system preferences. It prints fine but whenever i open scanner dialog box it says NO scanner selected? Why is it not recognizing the scanner part of the printer anymore?I tried uninstalling and installing the printer again didn't work
View 10 Replies
ADVERTISEMENT
Apr 15, 2012
I have Snow Leopard Mac OS 10.6.8, and I am trying to install my multifunction Canon printer. It detects and prints fine, but it won't detect my scanner or fax. I have no hard line for the fax - I use CableVision's wireless router for phone and internet. Is there a way for me to use either function (scanner or fax) with my Mac? I have an older Canon stand-alone scanner, Canoscan N1240U, and it won't detect that either...
Info:
PowerMac, Mac OS X (10.6.8)
View 5 Replies
View Related
Jun 20, 2012
how to get the scanner on a Canon MP800 scanner/printer to scan with Lion software. I've installed the Canon Version 3.0.4 driver but it still doesn't work.
Info:
iMac (24-inch Early 2008), Mac OS X (10.7.4)
View 2 Replies
View Related
Feb 10, 2012
I have a HP Photosmart B110 printer/scanner and I'm running OSX 10.7 Lion, I have no dramas printing but the scanner is not recognised.If I go to System preferences> Print & Scan, it shows the printer but won't show the scanner!! I obviously want and need to use the scanner but am unable!
Info:
MacBook Pro, Mac OS X (10.7.3)
View 2 Replies
View Related
Apr 11, 2010
I recently purchased an LG Flatron monitor to use as my second display for my MacBook Pro (unibody). I had it working with great results for about a week, but today when I plugged it in, the monitor is not detected. I have been looking through other's problems trying many of the same things, to no avail. [URL]
View 2 Replies
View Related
Apr 22, 2008
I have a IDE Sony DVD RW DW-Q120A. It does not get detected in Leo, neither pre-installation nor post-installation. Also tried a friend's Sony DW-G120A, which works in his Leo but not mine. However, all DVD RW do work with IDE to USB.
View 6 Replies
View Related
Feb 14, 2012
For the last couple of month or two, my MacBook Pro hasn't always been recognising all of my 4Gb of RAM and only detecting one of the two 2Gb RAM installed.
I thought it might have been a hardware problem but I have been able to restart OS X when it only detects 2Gb and after it has rebooted it would see all 4Gb of RAM but recently (last week or so) when I restart this no longer happens and it still only detects 2Gb not matter how many times I restart.
The 4Gb of RAM installed is the factory shipped RAM and I haven't opened my MBP to make any modifications.
For some reason when I boot into Windows 7 through BootCamp it detects all 4Gb of RAM.
I am having real trouble running some applications that I need due to the fact that I only have half the installed RAM available.
Info:
MacBook Pro, Mac OS X (10.6.8), Intel Core 2 Duo 2.66GHz, 4GB RAM
View 8 Replies
View Related
Mar 24, 2012
I bought a 4-port USB hub (Gear Head if it matters) and it's supposed to just plug in and work. I normally use a USB mouse & keyboard, thus taking up 2 out of 2 of my MacBook Pro's USB slots. I bought the Hub so I could add in a light or speaker for late night gaming sessions and quiet videos respectively. The light on the USB Hub turns on, but it isn't detected by my MacBook Pro. Anything I plug in to it recieves enough power to turn on (Speaker's Power light turns on, Mouse's laser will turn on, etc...) but they aren't detected by the MacBook Pro. IE; Mouse won't move on screen, keyboard will not type, speaker isn't shown as an option for outgoing sound device, etc...
Info:
MacBook Pro, Mac OS X (10.6.8)
View 7 Replies
View Related
May 24, 2012
Installed a new Seagate Momentus XT 750gb into my mid 2009 mbp. When I tried to install my leopard the HDD was not detected.
So I put in the original HDD and installed leopard into the Seagate via USB with success. Prior installation I formatted the Seagate already.
Then I install the Seagate into the mbp again but still it cannot be detected.
Info:
MBP 2.8G Intel Core 2 Duo, Mac OS X (10.5.8), 4Gb RAM
View 2 Replies
View Related
Sep 25, 2010
I have a western digital hard drive which I am using as backup it's setup with time machine but now when I connect that hard drive to other PC OR MAC it do not detect or sync and I want it to work on other computers how would I change that.
View 4 Replies
View Related
Apr 27, 2009
I have no effing clue what happen... I just rebooted my computer and then started having issues displaying on my primary and secondary monitors. At first primary monitor was not displaying but second was working... then vice versa... now I can't get second monitor working... I have no idea what to do...
I did the detect windows... recheck cables all work...nothing is hardware malfunctioning so its something in the software
You can see two monitors are detected in spaces but nothing displays
Again the monitor is working tested it on macbook and works fine... its software. Is there a reset monitor option?
View 3 Replies
View Related
Sep 16, 2009
My Mac Pro, used very little as yet in this life following a fortuitous acquisition from my former company, is failing to recognize one of the three hard disks. I have a 320 gb system disk running Snow L, and two 500 gb disks which are currently empty of data. Following boot, the second of the 500 gb drives isn't available - it doesn't appear on my desktop, or in Finder, or in the side bar when I launch Disk Utility.
The system profile information returns a single line saying there was an error when trying to detect information about my disks - it doesn't give me information on any of them. In its previous life this disk was a mirrored RAID array (with the other 500 gb drive) used a shared file server for standard office documents etc in what I would call a modest load environment - it was no media studio!
View 4 Replies
View Related
Feb 4, 2010
Using both smcFanControl and istat, I cannot get a reading on my fan speeds. I can hear my exhaust fan spinning, but these programs tell me it is always at 000 rpm. Also, I don't think the fan control is working, as I don't hear an increase in fan speed when I make adjustments.
Does anyone know how I can get these apps to recognize my exhaust fan?
View 5 Replies
View Related
Mar 2, 2012
my 3g dongle is not detected in both usb ports on my new mac book pro?
View 2 Replies
View Related
Apr 14, 2012
I'm running Mac OS X Lion (latest version) on a MacBook Pro mid-2010 model. OS X Lion was installed via recovery tools a few days ago. Today I plugged in a brand new Crucial M4 SSD via USB and it got detected. I restarted the laptop in recovery mode using cmd + R and chose to install Lion on the external SSD. For this I first had to partition the SSD before it showed up as a valid drive where Lion could be installed. The installation went almost to the end, but then stopped rather strangely for a very long time. So I decided to cancel the installation and restarted the laptop normally. Since then the Crucial M4 SSD is not being detected at all (doesn't even show up in Disk Utility).
Info:
MacBook Pro, Mac OS X (10.7)
View 7 Replies
View Related
Apr 29, 2012
Itunes only detected iphone but not ipad in the Device Bar. Both are connect to the WiFi. I would like to sync my Ipad through WiFi mode.
View 1 Replies
View Related
Jun 9, 2012
I have a MacBook Air and am trying via DVI cable to connect another display? The Mac will not detect the other screen. Any suggestions would be terrific. Do I need to "install" the old screen?
Info:
iPhone 4S, iOS 5.0.1
View 1 Replies
View Related
Dec 5, 2014
I have an early 2011 Macbook Pro 13 it was working OK but now has come up no batteries detected and I have tried a pram reset, smc reset and a new battery but still no luck. I did manage to get it to work for a while by turning it on with the power adapter connect then restarting it but at the point of the restart I pulled the power and it came on with the battery.
If I start it with the power adapter connected and then pull the power it will boot to the login screen briefly then go into sleep until I reconnect the power. When the power adapter is connected it just has a solid green light at all times never changes even if I do the smc reset.
Info:
MacBook Pro, OS X Yosemite (10.10), Early 2011
View 2 Replies
View Related
Jun 2, 2014
my mac wont' detect the battery and cannot be turned on unless it's plugged in. What should I do?
Info:
MacBook Pro, OS X Mavericks (10.9.2)
View 1 Replies
View Related
Jun 20, 2010
I have installed Mac OS X on vmware. When I put my usb drive, it is detected on the host OS not on Mac OS X which is running on vmware.
View 1 Replies
View Related
Oct 27, 2010
Four days ago my Macbook pro stopped working while I was doing internet. I had to shut it down but it never booted up again. I tried multiple times to format it with disk utility but it never worked utile at my 25th attempt, disk utility finally detected it so I formatted it but when I tried to install OS X, the disk couldn't be detected just as before. I thought that my HD was dead so i bought a new western digital scorpio blue 320 GB 5400 rpm. Now, it's the same story as before, my new hard drive is never recognize by the installation cd.
More infos:
- The drive is turning (it has power)
- With my first HD, i couldn't open the OSX partition but I could open the Windows partition.
- With my new HD in, the installation cd of OS X and windows cant detect the hard drive.
View 5 Replies
View Related
Jan 7, 2011
I have a 2009 model of Mac Mini and I have a 32" Samsung TV as the primary display hooked up though MiniDVI converted to VGA and it works properly. But my second Sony 19" monitor hooked up though DisplayPort Converted to VGA does not receive signal. It is detected by Display but no signal is being sent to it. When I have only the monitor though the DisplayPort hooked up it doesn't receive signal but when I have one only though the MiniDVI it displays fine so I know its not the Monitors.
View 1 Replies
View Related
Jan 9, 2011
I have a macbook pro and i used my old phillips tv for a 2nd screen. Bought a DVI-I to DVI-I cable, and was working just fine. For xmas I got a Dynex 26inch. I noticed it has a VGA and not DVI input, so I figured I would buy a DVI-I to VGA adapter and still be able to use the same cable. I go to hook it up and my TV says no signal.
On my laptop it detected the tv as BBY LCD TV, but still has no picture. Is there a setting I need to change? Or is the better route going with a new DVI-I to VGA or HDMI cable?
View 5 Replies
View Related
Jan 21, 2009
I have a ~year old 24" iMac (2.8 GHz Core 2 Duo) that I just suddenly started having a problem with. I use headphones pretty regularly and they are almost always plugged into the headphone jack. Recently, I lent my headphones to someone and, when I plugged them back in, the machine doesn't detect them. The audio works just fine coming out of the internal speakers, it's just that it *always* comes out of the internal speakers, no matter if the headphones are plugged in or not.
I took a look at the Sound Preferences panel and, sure enough, it doesn't detect the headphones as plugged in (just the internal speakers). Does anyone have any suggestions on troubleshooting? I'm not sure it matters, but I did just recently upgraded to 10.5.6. The headphones worked after the upgrade, but it may be that this is the first time they were *re*plugged in after the upgrade.
View 2 Replies
View Related
Jan 22, 2009
when i entered any disc (dvd/cd), my mac cant detect it and instead there's like an alarm sound. after a few minutes, it automatically eject the disc without giving any error message whatsoever.
i'm using Model Name:MacBook
Model Identifier:MacBook5,1
Processor Name:Intel Core 2 Duo
Processor Speed:2 GHz
View 4 Replies
View Related
Aug 18, 2009
I upgraded to 10A432 last week. Today I plug in my headphones and to my surprise they dont work. If the headphones are plugged in audio comes out of computer speaker. Under Sound in Syspref it doesn't see the headphone. My mac is still under the 90 day warranty but I am studying in Purdue and don't know where the nearest apple store is.
View 3 Replies
View Related
May 12, 2010
I have a Hanns-G 22in monitor that I'm trying to connect to my new Macbook Pro. There's a DVI cable connected from the monitor to the macbook pro with a little converter cable. I've tried what seems like every iteration of sleeping, turning off, and turning on both the laptop and the monitor to no avail. The monitor always remains black as if it's connected to nothing. I know the monitor is good, too, as I use it for my PC on a daily basis.
View 9 Replies
View Related
Jul 16, 2010
I just upgraded my late model Penryn MBP from the stock Hitachi 200GB 5400rpm drive to a Seagate 500GB 7200rpm drive. Performance wise, I'm happy. XBench is indicating a significant gain on the disk test (especially in the sequential test) and I loved being able to use Quicksilver almost as soon as I saw the menubar. However, when I turned on the machine, it did not recognize the drive automatically, and I had to hold down the Option key in order to get it to boot from the disk. I cloned my old HD using CarbonCopy Cloner. Once I did that everything was (obviously) fine. How can I get the MBP to recognize my new disk as the default boot volume?
View 2 Replies
View Related
Mar 15, 2008
I have an old JVC GR-DVL920U digital camera and am attempting to connect it to my (new) macbook with a firewire..iMovie does not detect any camera connected. I initially attached the cable to the camera, then into the firewire port, then turned the camera on to VCR mode. When that didn't work I tried restarting the camera, unplugging and plugging back the firewire and even restarting the computer with the firewire plugged in.
The computer is not detecting and device being plugged into the firewire port. I even tried with a USB and didn't capture any detection. My still digital camera (Canon SD1000) plugs in with the USB and has no problems, my (old) ipod shuffle plugs directly into the USB port and there are no problems.
View 6 Replies
View Related
Jun 14, 2012
After installing the 10.7.4 Update, my MacBookPro 15 inch, early 2011, says "No Wi-Fi hardware detected".After resetting the PRAM and the SMC, functionality came back, but only until i have to shutdown the Book. After turning it on on again, again "No Wi-Fi hardware detected" under the Wi-Fi symbol in the menue bar. Again, after resetting PRAM (waiting for 3 chimes at startup), Wi-Fi hardware is detected again and working properly.
Info:
MacBookpro, Mac OS X (10.7.4)
View 3 Replies
View Related
