I just purchased a used Epson 3170 Perfection Photo Scanner. When I try to use Image Capture, the software recognizes the scanner as a device. But I get the message "Failed to open a session on the device."
Note: From the Epson site, I downloaded an Epson ICA Driver v5.2.6 for Image Capture because "This driver corrects possible issues when using Apple's Image Capture utility with an Epson scanner."
"failed to open a session on the device" - HP Officejet 5610 scanner
Info:
MacBook Pro, Mac OS X (10.6.8)
Most of my attempted fixes use only my MacBook, OS X 10.7.3 (current Lion), iTunes is 10.5.3(3) 64-bit (current version). Phone is AT&T 4S, 16 GB v. 5.0.1 (9A406, current version).I have used iCloud match on this phone, but now have it shut off. When I use iTunes to view the music on the iPhone, I see 1864 songs. iTunes sees this as 1864 items, 5 days, zero bytes). All are streams. All are greyed out. I can't delete them. I can't overwrite them becuase I can't sync.
This problem is on every computer I have tried. 4 different computers, all running either Lion, Snow Leopard, Windows 746x or Windows 8. I have tried the following: Reset all settings on iPhone, then restored from iCloudRemove all applications and settings, then restored phone from iCloudremoved iTunes, reinstalled (windows only)Turned off iTunes match on Mac, Windows and iPhoneRemoved all device support for iPhone, then re-installed itRestarted iPhone, Mac and PCReinstalled Windows from scratchTried a Mac that had never synced this phone before.Tried new installation of OSX (install Snow Leopard, upgrade to Lion)Tried DIAGNOSTICS on Windows iTunes (all passed, including Device Connectivity, then it reported 'sync failed to start')Tried one post that insisted my iCloud settings on my Mac and in the iPhone control panel needed to match, so I tried that too.
Has anyone been able to get their Epson scanner to open in Photo Shop CS3? I can open the scanner only from the Epson Scan utility.
CS3 on my desktop (Dual G4 MDD) will allow me to open the scanner directly in the File/Import menu of Photoshop with Twain.
Info:
MacBook Pro, Mac OS X (10.6.8)
I have just updated my Mac Pro to OS X 10.9.3, then my Epson Scan driver cannot work anymore... (Though the printer works...)
My Epson belongs to the "Epson Stylus SX 430" series, according to here:OS X: Printer and scanner software available for download this all-in-one machine should be compatible with OS X 10.9.3, but I can not find the proper driver software... I have downloaded some new softwares from official web. of Epson, but it did not work... It seems that Epson did not have a effective software for OS X 10.9.3....
Mac Pro: OS X 10.9.3
Epson Stylus SX 435W, Scanner cannot work because of invalid software.
I have a Epson Perfection 636u scanner from 1999 and am thinking of getting a new iMac. On the Epson support page, it lists the newest driver from 1999 and says that it will work on Macintosh system 7.5 to 8.6. (here is a link http://www.epson.com/cgi-bin/Store/s...s&platform=All). Any chance of this working on Tiger? I don't see myself buying a new scanner because I use it just a few times per year.
View 4 Replies View RelatedI reattached my Epson Perfection 1650 Photo scanner to my Mac G4 (Sawtooth) desktop today after updating the drivers and all to OS 10.4, which is what is on my computer. (The updated drivers also work for 10.5, which is on my laptop, but that doesn't matter here.) When I hit the Smart Panel icon on the desktop, the computer went to Classic mode, for some reason, even though the updated software is for OS X. I was able to get a Twain window, but when I clicked on any of the options for scanning, I get a message saying that the scanner is not recognized (something about a bus). I looked at all the available FAQs at the Epson Web site, but they are not helpful or relevant. For example, one told me to turn off Scan Monitor in Extensions, but of course, there is no Extensions Folder in OS X. One other FAQ suggested reinstalling the software that came with the scanner, but that was way back when I used OS 9.2.2, so how could I then bring it up to 10.4?
Most of the other FAQs were for people with Windows, so of course, those didn't help at all. The Ready light is on; all the cables are plugged in properly. I'm ready, willing, and able. I can't get Epson support, because the scanner is out of warranty, and the Epson online helpers (private) want a good deal of money to provide an answer. Granted, I don't have to pay them unless I am not satisfied with the answer, but I'd rather not have to sell the farm, when I could get a new scanner for only about twice what they are asking to give me an answer. OR (breathlessly hoping) if I can get some ideas here. I have a lot of pages to copy and send to someone, and now I'll have to copy them manually at the local store or across town, at my mother's, and then send them through the mail. It all seemed so straightforward and simple: scan and send to the eager recipient.
I have upgraded my MacBook pro to Lion. Since this latest upgrade, my epson perfection 2480 scanner is not compatible with the latest upgrade. How do I make sure that whatever I buy now is compatible?
Info:
iMac, 2007 imac
I have an iMac with a 2.8 GHz Intel Core 2 Duo processor and am running Mac OS X 10.7.3. My Epson Perfection V700 Photo Scanner worked great with Snow Lepord but now does not work with Lion. I downloaded the driver for Mac OS X 10.7 but I continue to get the message "Cannot communicate with the scanner. Make sure the scanner is on, correctly setup and connected with no errors in the scanner. If using an SCSI connection, restart your computer."
I have connected the scanner with USB and then with Fire wire and then both. I have deleted and redownloaded the driver files. I could not get communication. Can anyone help. The scanner and iMac are too large to drag to a genius bar.
I have MACBOOK G4 OSX 10.4.11. Which driver do I need for the Epson Stylus PHOTO RX620 (and where do I get it?
Info:
MacBook
I can't get my Epson scanner to launch on my iMac.
Info:
iMac, Mac OS X (10.5.8)
I have an Epson Perfection v500 scanner and am having problems getting the Image Capture app to recognize it. The included epson scan software will not work with Snow Leopard- this includes the newer "snow leopard compatible" drivers and app.Anyone else have problems with the Image Capture app and Epson scanners?
View 1 Replies View Relateda new epson v600 scanner will not communicate with my iMac running OS X 10.8 - get the blinking yellow error light. Epson says the scanner is fine. I have updated all Apple software, incl. Epson drivers.
View 5 Replies View RelatedNew iMac and Yosemite -I can't get my Canon scanner to behave nicely. It's an 8800F. I have installed the latest Canon drivers (today) and MP-Navigator and I can at least scan OK. But I would like to be able to scan directly within applications (as I was able to on my old OSX 10.6 system), ie, by selecting the scanner as a device within the application.
But the scanner does not show as a device in applications, or within Image Capture.
Info:
iMac, OS X Yosemite (10.10.1)
I recently updated to Lion. So far the only thing that really annoys me is that every time I open Safari it opens to the last page(s) I visited. I want it to open to a blank page. For the life of me - I cannot figure out how to get it to do this.
View 3 Replies View RelatedTrying to burn 21 photos to disc and the following message appears "The disc can't be burned, because the device failed to calibrate the laser power level for this media." Tried burn from iPhoto, and from copied files on desktop. I have previously burned to disc using a variety of brands, without problem.
View 7 Replies View Relatedit wont give me the choice to open the computer with another username and password then the one already registered.
Info:
iMac
When I close Safari by clicking the red dot and then re-open Safari none of my tabs re-open. How do I get Safari to open all my tabs from the last session?
Info:
Safari, Mac OS X (10.7.4)
I need to open a VNC session with a remote redhat server using my MAC and SSH
View 1 Replies View RelatedWhen I want to install an application using a .dmg file and I click the .dmg file then I get the message
The following disk image failed to mount
Reason: Device not configured
I started using iBook with version Mac OS X 10.3.2 and now I am using Mac OS X 10.4.2. If you need to know, I have 9GB available in my iBook. NZ
when i open safari then all tabs of previous session are loading. we want just load the tab what i have click.
Info:
Shake 4, Mac OS X (10.7.2)
P.S. Also cleared cache and History. Running OS 10.7.4 and Safari 5.1.7.
Info:
MacBook Pro, Mac OS X (10.6.8), 2.2 GHz Core i7, 4 GB 1333 MHz DDR3
I was having problems with the external drive where I store my Time Machine backups, so I tried plugging and unplugging the drive but could not mount the drive. I ran Disk Utility and tried to verify the disk, which told me the disk needed to be repaired. I tried to repair the disk only to get an error message that Disk Utility could not repair the disk and it needed to be reformatted. So I tried to erase the disk with Disk Utility only to get the error message "Volume erase failed: Media kit reports not enough space on this device for requested operation". I am not sure what else to try at this point and could not find any similar questions here.
The drive in question is a 3TB USB Seagate Backup + Desk Media, formatted as Mac OS Extended (Journaled). It's divided into two partitions, one of which (2.2 TB) holds only Time Machine backups of my desktop and laptop and the other of which (800GB) is formatted similarly with some files stored on it. I was able to verify and repair this other partition. I'm running Disk Utility 13 on an iMac (2.8 GHz Intel Core 2 Duo) running OSX 10.8.5 ...
Here's the deal on an old MacBookPro Intel Core Duo 2.16 GHz! The disc can’t be burned, because the device failed to calibrate the laser power level for this media. Basic problem is the dvd burner doesn't burn!
Info:
MacBook Pro, Mac OS X (10.6.8)
I have a mac book pro OSX 10.7.5 I am getting this message when trying to burn a cd: The disc can’t be burned, because the device failed to calibrate the laser power level for this media.
Info:
Mac Pro, Mac OS X (10.7.5)
I recently updated by 2013 27" iMac to OS X 10.9.3 and since then, I have a weird problem when I switch from one user to another: I often have several user sessions opened for several account, and when I switch from one to the other, or go to the login screen and open an already open session, I find the windows I had left open resized and/or moved. They're often moved to the upper left corner, and resized as if the screen was much smaller than it actually is. It worked without any problem in OS X 10.9.2…
Info:
iMac, OS X Mavericks (10.9.3), Late 2013, 27" screen, 32GB RAM
It is, when I go to the instructions to uninstall HP scanner I get this: You can't open the application HP Uninstaller because PowerPC applications are no longer supported.
Info:
iMac, Mac OS X (10.7.4)
I went to scan photos with new iMac OS X Lion and it says "You can't open the application Epson Scan because Power PC applications are no longer supported." What can I do to support them?
Info:
iMac, Mac OS X (10.7.3), Epson Printer
I have had problems today when I am trying to scan with my canosan 5200f it keeps saying can't open the driver but I have use it before and it worked ok so I redownloaded the driver today and ran the installation which rebooted but still says can't open the driver.
Info:
iMac, Mac OS X (10.6.8)
When I open Safari 5.1.5, it automatically opens all the pages from my previous session. Can I turn off that feature , and how?
Info:
MacBook Air, Mac OS X (10.7.3)
