OS X V10.4 :: Which Printer / Scanner Driver Required For Epson RX620 On G4
Jun 26, 2012I have MACBOOK G4 OSX 10.4.11. Which driver do I need for the Epson Stylus PHOTO RX620 (and where do I get it?
Info:
MacBook
I have MACBOOK G4 OSX 10.4.11. Which driver do I need for the Epson Stylus PHOTO RX620 (and where do I get it?
Info:
MacBook
Just out of the blue, I can't print using my epson 600, a multi use printer that I have set up on my network.
The strange thing is my scaning driver is there and working, but my wireless printer is not there. I can see my Epson Printer, but its not the wireless driver, its the older driver for using the cable.
I've just loaded mac OSX 10.5.1 onto my Powerbook G4, and I've lost my Epson Stylus Colour 860 printer driver?
I've gone into the Print & Fax Pref's to add a printer, but there are no printers listed?
I've also looked on the Epson printer drivers to download and there doesn't seem to be any to support any OS later than 9?
which driver should i use for the epson LX300 matrix-dot printer??? I dowloaded all drivers for epson but i didn't find the driver for the LX300.
Info:
epson LX300 matrix printer, Mac OS X (10.7.4)
I can't find the yosemite driver for my new epson r3000 printer. I am using 10.10.1. The Epson website says to find the driver by going to the App store and looking for updates. I did that and didn't find any. In "Printers and Scanners" in System Preferences I notice that the computer is aware that I am connected to the printer (via USB) but a message at the bottom of the window says that "Software for this printer isn't available from Apple. Contact the printer's manufacturer..."
Info:
MacBook Pro with Retina display, OS X Yosemite (10.10.1), printer driver
Can I toggle between Air Print and an Epson printer driver? The only way I can print directly on CDs with my Epson XP-810 is to use Epson's driver. Normally, I'd prefer to use Air Print.I'm running OSX 10.9.4.
Info:
2.8 GHz Intel Core 2 Duo iMac, 4 GB SDRAM, 931.19 GB drive
I have two perfectly good printers, but the drivers for my MacBook Air are said to be unavailable on the epson site.
Info:
MacBook Air, Mac OS X (10.7.4), Epson Stylus CX3200 & CX42OO printe
how to get the scanner on a Canon MP800 scanner/printer to scan with Lion software. I've installed the Canon Version 3.0.4 driver but it still doesn't work.
Info:
iMac (24-inch Early 2008), Mac OS X (10.7.4)
After I installed Epson Printer software version 2.1 and I totally lost the communication to Epson V700 Scaner, the scanner keep reset the power.
Finally the error message: Cannot communicate with the scanner.
Info:
MacBook Pro, Mac OS X (10.7.1)
I have a HP Photosmart B110 printer/scanner and I'm running OSX 10.7 Lion, I have no dramas printing but the scanner is not recognised.If I go to System preferences> Print & Scan, it shows the printer but won't show the scanner!! I obviously want and need to use the scanner but am unable!
Info:
MacBook Pro, Mac OS X (10.7.3)
Has anyone been able to get their Epson scanner to open in Photo Shop CS3? I can open the scanner only from the Epson Scan utility.
CS3 on my desktop (Dual G4 MDD) will allow me to open the scanner directly in the File/Import menu of Photoshop with Twain.
Info:
MacBook Pro, Mac OS X (10.6.8)
I have just updated my Mac Pro to OS X 10.9.3, then my Epson Scan driver cannot work anymore... (Though the printer works...)
My Epson belongs to the "Epson Stylus SX 430" series, according to here:OS X: Printer and scanner software available for download this all-in-one machine should be compatible with OS X 10.9.3, but I can not find the proper driver software... I have downloaded some new softwares from official web. of Epson, but it did not work... It seems that Epson did not have a effective software for OS X 10.9.3....
Mac Pro: OS X 10.9.3
Epson Stylus SX 435W, Scanner cannot work because of invalid software.
I had a Dell 1100 laser printer working on my iMac (G4 ball type) using a GIMP printer. I had to reset the queue and lost the driver. I can't remember which GIMP driver I used. Also, although I have loaded the latest GIMP s/w, I can't seem to get to them in Tiger 10.4.6.
View 24 Replies View RelatedI have a Epson Perfection 636u scanner from 1999 and am thinking of getting a new iMac. On the Epson support page, it lists the newest driver from 1999 and says that it will work on Macintosh system 7.5 to 8.6. (here is a link http://www.epson.com/cgi-bin/Store/s...s&platform=All). Any chance of this working on Tiger? I don't see myself buying a new scanner because I use it just a few times per year.
View 4 Replies View RelatedI reattached my Epson Perfection 1650 Photo scanner to my Mac G4 (Sawtooth) desktop today after updating the drivers and all to OS 10.4, which is what is on my computer. (The updated drivers also work for 10.5, which is on my laptop, but that doesn't matter here.) When I hit the Smart Panel icon on the desktop, the computer went to Classic mode, for some reason, even though the updated software is for OS X. I was able to get a Twain window, but when I clicked on any of the options for scanning, I get a message saying that the scanner is not recognized (something about a bus). I looked at all the available FAQs at the Epson Web site, but they are not helpful or relevant. For example, one told me to turn off Scan Monitor in Extensions, but of course, there is no Extensions Folder in OS X. One other FAQ suggested reinstalling the software that came with the scanner, but that was way back when I used OS 9.2.2, so how could I then bring it up to 10.4?
Most of the other FAQs were for people with Windows, so of course, those didn't help at all. The Ready light is on; all the cables are plugged in properly. I'm ready, willing, and able. I can't get Epson support, because the scanner is out of warranty, and the Epson online helpers (private) want a good deal of money to provide an answer. Granted, I don't have to pay them unless I am not satisfied with the answer, but I'd rather not have to sell the farm, when I could get a new scanner for only about twice what they are asking to give me an answer. OR (breathlessly hoping) if I can get some ideas here. I have a lot of pages to copy and send to someone, and now I'll have to copy them manually at the local store or across town, at my mother's, and then send them through the mail. It all seemed so straightforward and simple: scan and send to the eager recipient.
I have upgraded my MacBook pro to Lion. Since this latest upgrade, my epson perfection 2480 scanner is not compatible with the latest upgrade. How do I make sure that whatever I buy now is compatible?
Info:
iMac, 2007 imac
I have an iMac with a 2.8 GHz Intel Core 2 Duo processor and am running Mac OS X 10.7.3. My Epson Perfection V700 Photo Scanner worked great with Snow Lepord but now does not work with Lion. I downloaded the driver for Mac OS X 10.7 but I continue to get the message "Cannot communicate with the scanner. Make sure the scanner is on, correctly setup and connected with no errors in the scanner. If using an SCSI connection, restart your computer."
I have connected the scanner with USB and then with Fire wire and then both. I have deleted and redownloaded the driver files. I could not get communication. Can anyone help. The scanner and iMac are too large to drag to a genius bar.
I can't get my Epson scanner to launch on my iMac.
Info:
iMac, Mac OS X (10.5.8)
I just purchased a used Epson 3170 Perfection Photo Scanner. When I try to use Image Capture, the software recognizes the scanner as a device. But I get the message "Failed to open a session on the device."
Note: From the Epson site, I downloaded an Epson ICA Driver v5.2.6 for Image Capture because "This driver corrects possible issues when using Apple's Image Capture utility with an Epson scanner."
I have an Epson Perfection v500 scanner and am having problems getting the Image Capture app to recognize it. The included epson scan software will not work with Snow Leopard- this includes the newer "snow leopard compatible" drivers and app.Anyone else have problems with the Image Capture app and Epson scanners?
View 1 Replies View RelatedI've recently bought a IMAC with the OS X 10.5.2 and can't find scanner driver for my printer. Anyone know where to get this?
View 3 Replies View RelatedI have a Canoscan 4400F which is not recognised by my MBP (early 2008) or my iMac (early 2007). (Error message is 'Unable to find driver'.) Despite installing various drivers which are supposed to be Leopard compatible, no luck so far.
Does anyone know of a driver which will work, or alternatively if I have to replace, a recommend a reasonably priced scanner which is Leopard compatible. Scanner will primarily be used for scanning documents for archiving and old photo prints for adding to iPhoto.
I'm trying to add an Epson PictureMate PM 260 printer to my iMac, 10.7.3. When I plug it in I can see it in the Add Printer window, but when I try to install the driver, I get a message saying the "software is currently unavailable". I searched the epson site, but they don't seem to have drivers compatible with 10.7.
Info:
iMac, Mac OS X (10.7.2)
This scanner was able to scan 3D objects as if they were photographed professionally, if you put a colored cloth behind the object. Great depth of field. Used to have one, I just bought several of them, I have a beige G3, but I have no software/driver. Where to go?
View 1 Replies View RelatedI have just purchased a Macbook Air and would like to use it with my Fujitsu fi6110 scanner. Fujitsu does not have a driver for this scanner so I was wondering if anyone has experience with this. Fujitsu suggested asking Apple or trying ScanTango. They have a program that is compatible with the scanner for $99 but it is not as good (to me) as Adobe scan program on my PC.
View 4 Replies View RelatedI have an Intel Mac Mini
I've just tried to install the epson drivers for my printer Epson Stylus Photo R220, went to their site and downloded the driver, installed and resarted.
Then installed the Epson Print CD application that comes with the CD, and installed, however when i try to print to CD an error states:
"The epson print driver dealing with CD printing is not installed"
I've looked on the CD and on their site and cannot find anything.
I just updated my Mac I Book G4 from OSX 10.3 to 10.4. Now when I click on my Epson Smart Panel icon to start scanning I get a message that says Install the supported twain driver. I have downloaded the Epson Twain Driver v 2.77. I am told I need to uninstall the old Twain driver. How do I do that?
View 1 Replies View RelatedJust loaded snow leopard and my Epson Sylus Photo rx580 won't print?
Info:
MacBook
Pro, Mac OS X (10.6)
I was having problems printing from my Canon LBP6000. Print jobs remained held in the queue. I uninstalled and reinstalled the Mac CAPT Ve r340 driver from Canon's website, no improvement. The printer works fine with my Windows laptop. I found an option to remove all printers from the Print preferences section. I can't remember how I did this, but all printers were removed. I reinstalled the above driver, but now in the 'print & scan' - 'add printer' section, I have no printer options. And no idea how to get printer options.
Info:
Mac mini, Mac OS X (10.7.3)
I checked on the printer and scanner page that Lion supports my old Epson Perfection 2450 scanner. [URL]. Lion cannot seem to recognize my scanner, I have tried everything. Is there a way to redownload the driver but not through Software Update? There seems to be no update for Epson driver after installing Lion.
View 7 Replies View Related