I see Seagate & WD have announced these but I'm struggling to find many available to order. Only the WD Green one appears to be even offered as an internal option. What is more it is more expensive buying the internal drive than buying the external USB one.
Has anyone bought one of these externals and stripped out the drive to put in their Mac Pro? I'm running out of space on my 1.5TB and swopping to 2TB hardly seems enough.
My G4 MDD (1.25 CPU, 2G RAM, OSX 10.5.8) needs a new drive.
I'm told SATA drives are the thing to get.
I don't know what a SATA drive is, or whether it is compatible with my machine.
I'm a graphic designer but I don't know much about my computer's inner workings. I have a mirrored drive door dual 1Ghz G4. I have two SATA drives that were used in a Dell server on a RAID setup. They are Western Digital Caviar HDs, 250 GB apiece.
My question is: is there any way to install one of these drives in my computer?
Does anyone know if the internal SATA drives on the MacPros are hot swappable?
View 2 Replies View RelatedThe time has come to move to a RAID setup in my Mac Pro. Ideally I'd like to run 4 1.5TB SATA drives in a RAID 5 or 10. It seems there are a LOT of threads on this topic all filled with different information, so I have a few questions...
Which RAID cards are bootable?
Do any work like the Apple card and interface with the drives through the logic board?
If not, how do you connect the internal drives to the RAID card in their stock bay locations?
I know some SATA II drives can be jumpered to be SATA I compatible. Would they be reliable in this application? I have an iMac G5 and I'd like to upgrade the internal HD.
View 3 Replies View RelatedDoes anyone know if the internal SATA drives on the MacPros are hot swappable?
View 3 Replies View RelatedJust wanted to confirm that the Seagate Sata 2 hard drives are compatible with the MacPro4,1 Quad-Core Intel Xeon. I'm looking to buy two Sata 2 drives. One drive as a data backup on the mac side, and one to backup Windows 7 (accessed with Bootcamp and Parallels 5) on the windows side.
View 1 Replies View RelatedIs it possible to install 4 SATA drives into a G5 tower? I didn't open it up yet cause I have to move so much material to get to it. I'm assuming you can purchased a SATA PCI card but is there room in the case for 2 additional drives?
Information:
PowerMac G5
I'm looking to upgrade my MPB 17 2.33 GHz model with one of the new 2.5 SATA 320G 7200 RPM drives from either Hitachi, Seagate or Western Digital.
View 5 Replies View RelatedI was wondering if my dual 2.0 ghz g5 supported the sata 300 hard drives?
View 1 Replies View Relatedi was wondering if my dual 2.0 ghz g5 supported the sata 300 hard drives?
View 11 Replies View RelatedI have two drives in my Quicksilver 2002 G4, one is a 250GB which can be fully used, the other an 80GB. Can U rid both of these drives and install two SATA 1.5TB drives? I do not want to use the PCI slots for a SCSI card and wire additional drives that way, because the transfer speed will be limited to 40mbps I believe. I have a Sonnet card a dual PPC 1,8Ghz card, a PCI USB 2.0 card and have other open PCI slots, but finally ran out of storage, and have a use for this machine to hold a LOT more. Other than the transfer speeds possible on SATA, are there any other differences between the original IDE (ATA) drives? Do they connect the same way?
View 9 Replies View RelatedI have used an optical caddy to fit a SSD into my macbook pro along with the existing 500GB hard drive. My next ambition is to fit 2 hard drives and a SSD inside the macbook pro. My questions are:
1) Can I use a Sata port doubler (Do they exist?) to run 2 hard drives through one sata port. (The bandwidth is there)
2) Failing the above can I use a cable linking a sata drive to the airport express slot? (is it PCI express?)
1) Does Bootcamp properly support Vista 64-bit ? If so how stable is it (don't want any crashes caused by poor drivers - really want rock solid stability under Vista) ?
2) Will the Mac Pro support any SATA hard drive or would I have to buy specific models/brands ?
I want to know if there is a way to connect sata 2.5 hd's to the sata connections in the mac pro. I cannot seem to find the cables to be able to do this. Can someone help with a link? I have several 250gb sata drives that have been taken out of mbp's and would like to put them to work.
I have looked and found several ways to access the ports, but have been stuck at finding the cable.
I have a 13" MacBook Pro 2011, 2.3gHz, 320GB. What connector does it have? And would SATA still work with my laptop? One more question, what are the exact dimensions of the hard disk drive bay in my laptop, the manual only says 2.5".
Info:
MacBook
Pro, Mac OS X (10.7.2)
I have a MacBook Pro with a 128GB solid state. Is this SATA II or SATA III?
View 3 Replies View RelatedIm considering purchasing a higher capacity internal hardrive around the 750Gb/1Tb mark. However my macbook is the early 2008 model, and it seems the majority of hardrives are SATA II, having speeds of 3Gbt, which my mother board may not be capable of (apparently only 1.5Gbt) From researching and reading some reviews of others who have purchased internal drives on Amazon UK, some have had difficulty due to this problem, but have been able to fix the issue with a firmware update reducing SATA II drive speeds to 1.5Gbt.
Questions I have: Do all SATA / SATA II internal hardrives need a firmware update if replacing on to a new computer?(If so, would I need to look for a specific firmware update for the specific drive I intend on buying? And if you're in the knowledge would you mind posting links to these updates?)What is the process of updating the firmware i.e. would I need to put firmware on external usb hardrive 1st, then upload it to macbook after installing new internal drive (if it boots up my OS that is) etc. Would a 'hybrid' (disk+solid state) drive be compatible with a macbook as old as mine?Do I need to update my operating system to OS X Lion first, or can it be done after installing the drive?
my current laptop hardware:
Macbook Pro 15.4" (Early 2008 Model)
Intel Core 2 Duo 2.4Ghz ProcessorGeForce 256Mb 8600M GT Graphical Processor
Intel ICH8_M AHCI 1.5 Gbt MotherboardToshiba MK1655GSXF 160Gb 2.5" Hard DriveOperating System: OS X Leopard 10.5.8
Info:
MacBook Pro, Mac OS X (10.5.8), 15.4" 2.4Ghz (Early 2008 Model)
I'm looking for a new HD to replace the original, now failing Maxtor drive in my G5 tower (1.8 Ghz dual processor, purchased in Aug. 2004), and have just about settled on the Western Digital Caviar SE16 series. It seems there are two types -- SATA and SATA II -- and I'm not sure about how to make a decision on which particular WD model to buy.
Will either type work in my machine? Or would the SATA II have potential compatibility problems? I read somewhere in these forums that someone with a G5 had bought an SATA II drive, and it wouldn't run with his system. (He said he had to reset some jumper switches to reduce the transfer rate of the drive ??, but now I'm told elsewhere that SATA drives don't have jumper switches.
Information:
1.8 DP G5, 1.5 GB RAM w/ Superdrive
Mac OS X (10.3.x)
I have ordered my first Mac, a Mini 2.66Ghz and I will put a Intel X25-M SSD in the machine to speed it up further. I hope I will be pleased with it
However, the question I encountered was whether the sata connection in the Mini is SATA-150 or SATA-300? Does anyone know?
I am now shopping for a new internal HD of MAC G5; previous HD died. I have decided on a Western Digital and was about to order one when I became alarmed by the SATA II listings. Is there a difference between SATA and SATAII that I should be concerned about the comptability? Don't want to get it and find out it doesn't work!
View 3 Replies View RelatedI'm looking at the specs page for the MacBook Pro and it reads this...
Your MacBook Pro comes standard with a 5400-rpm Serial ATA hard drive. Choose a hard drive with a faster speed for greater performance. Or you can choose a solid-state drive that offers enhanced durability.
Basically suggesting that the HDD option has a performance advantage over the SSD, but is this the case? I always thought SSDs could read & write quicker because they use solid-state flash memory as opposed to hard disks.
I want to go with the 256GB SSD but I want to know how it ranks in speed.
I have a question regarding Time Machine functionality. Here's my situation. I have two hard drives in my Pro: one that operates as a Boot drive, and one for storage. Right now I have Time Machine set up to backup my storage drive, but I was wondering if it was possible to have plug in a second external drive and use it to back up the Boot drive. I searched for a similar thread, but couldn't really find anything. Has anybody successfully done this?
View 1 Replies View RelatedAs the title says, can you combine 2 drives to one large without the expensive raid card?
View 2 Replies View RelatedI have searched but I can't seem to find an answer to this question...
I have 4 x 500MB drives in my Mac Pro and 4 x 500MB external firewire drives.
Currently I use Carbon Copy Cloner to clone each internal drive to it's respective backup. ie Drive 1 > Backup 1, Drive 2 > Backup 2 etc
Is it possible to use Timemachine in a similar way? so that each internal drive has it's own corresponding Timemachine backup?
I was wanting to install a Blu-ray drive in my Mac Pro to play movies in bootcamp on my ACD (I know it doesn't have HDCP).
What I was wondering if any one had installed a SATA Blu-Ray drive using an IDE converter and if that works alright?
It's about time to replace the original HDD in my late 07 SR MBP
Was wondering if anyone has put a SSD in one of these laptops with a 1.5Gb bus, and what your experience has been.
I'm debating between a SSD and a Hitachi Travelstar 500GB HDD
Recently I tried installing a 2.5" SSD in a 3.5" enclosure (Icy Dock) in one of the internal drive bays in my Mac Pro. The enclosure was defective, apparently, because the SATA ports on the enclosure didn't quite line up with the internal SATA ports in the MP drive bay. Unfortunately, I pushed a little too hard to get it in and I ended up bending the metal brackets that the black plastic SATA port is screwed on to in the Mac Pro.
The result is that the SATA port is now bend down at about a 10% angle, which is enough to prevent me from sliding a hard drive in and connecting it. I've tried to bend it back to the normal angle, but I wasn't successful.
Trying to pick internal HD's for a new Mac Pro. Do the SATA 600's give me anything over the SATA 300's. Probably going to set-up an internal software RAID of two or three, till I can afford a decent external RAID. Does the internal data transfer speed max out at some level that buying a SATA 600 drive would be a waste? Also, I have two existing 20" Apple LCD Monitors, probably 5 years old that i need to use. Is the appropriate adapter simply the MDP to DVI connector? They're currently connected to a G5.
View 8 Replies View Related