I'm a graphic designer but I don't know much about my computer's inner workings. I have a mirrored drive door dual 1Ghz G4. I have two SATA drives that were used in a Dell server on a RAID setup. They are Western Digital Caviar HDs, 250 GB apiece.
My question is: is there any way to install one of these drives in my computer?
Is it possible to install 4 SATA drives into a G5 tower? I didn't open it up yet cause I have to move so much material to get to it. I'm assuming you can purchased a SATA PCI card but is there room in the case for 2 additional drives?
Information:
PowerMac G5
I see Seagate & WD have announced these but I'm struggling to find many available to order. Only the WD Green one appears to be even offered as an internal option. What is more it is more expensive buying the internal drive than buying the external USB one.
Has anyone bought one of these externals and stripped out the drive to put in their Mac Pro? I'm running out of space on my 1.5TB and swopping to 2TB hardly seems enough.
My G4 MDD (1.25 CPU, 2G RAM, OSX 10.5.8) needs a new drive.
I'm told SATA drives are the thing to get.
I don't know what a SATA drive is, or whether it is compatible with my machine.
Does anyone know if the internal SATA drives on the MacPros are hot swappable?
View 2 Replies View RelatedThe time has come to move to a RAID setup in my Mac Pro. Ideally I'd like to run 4 1.5TB SATA drives in a RAID 5 or 10. It seems there are a LOT of threads on this topic all filled with different information, so I have a few questions...
Which RAID cards are bootable?
Do any work like the Apple card and interface with the drives through the logic board?
If not, how do you connect the internal drives to the RAID card in their stock bay locations?
I know some SATA II drives can be jumpered to be SATA I compatible. Would they be reliable in this application? I have an iMac G5 and I'd like to upgrade the internal HD.
View 3 Replies View RelatedDoes anyone know if the internal SATA drives on the MacPros are hot swappable?
View 3 Replies View RelatedJust wanted to confirm that the Seagate Sata 2 hard drives are compatible with the MacPro4,1 Quad-Core Intel Xeon. I'm looking to buy two Sata 2 drives. One drive as a data backup on the mac side, and one to backup Windows 7 (accessed with Bootcamp and Parallels 5) on the windows side.
View 1 Replies View RelatedI'm looking to upgrade my MPB 17 2.33 GHz model with one of the new 2.5 SATA 320G 7200 RPM drives from either Hitachi, Seagate or Western Digital.
View 5 Replies View RelatedI was wondering if my dual 2.0 ghz g5 supported the sata 300 hard drives?
View 1 Replies View Relatedi was wondering if my dual 2.0 ghz g5 supported the sata 300 hard drives?
View 11 Replies View RelatedI have two drives in my Quicksilver 2002 G4, one is a 250GB which can be fully used, the other an 80GB. Can U rid both of these drives and install two SATA 1.5TB drives? I do not want to use the PCI slots for a SCSI card and wire additional drives that way, because the transfer speed will be limited to 40mbps I believe. I have a Sonnet card a dual PPC 1,8Ghz card, a PCI USB 2.0 card and have other open PCI slots, but finally ran out of storage, and have a use for this machine to hold a LOT more. Other than the transfer speeds possible on SATA, are there any other differences between the original IDE (ATA) drives? Do they connect the same way?
View 9 Replies View RelatedI have used an optical caddy to fit a SSD into my macbook pro along with the existing 500GB hard drive. My next ambition is to fit 2 hard drives and a SSD inside the macbook pro. My questions are:
1) Can I use a Sata port doubler (Do they exist?) to run 2 hard drives through one sata port. (The bandwidth is there)
2) Failing the above can I use a cable linking a sata drive to the airport express slot? (is it PCI express?)
1) Does Bootcamp properly support Vista 64-bit ? If so how stable is it (don't want any crashes caused by poor drivers - really want rock solid stability under Vista) ?
2) Will the Mac Pro support any SATA hard drive or would I have to buy specific models/brands ?
I want to know if there is a way to connect sata 2.5 hd's to the sata connections in the mac pro. I cannot seem to find the cables to be able to do this. Can someone help with a link? I have several 250gb sata drives that have been taken out of mbp's and would like to put them to work.
I have looked and found several ways to access the ports, but have been stuck at finding the cable.
As the title says, can you combine 2 drives to one large without the expensive raid card?
View 2 Replies View RelatedAfter installing internaly i booted back-up from my external FireWire HD bootable back-up, deleted and mounted the new HD and via 'carbon copy' i copied my bootable back-up onto it, set it as my start up disc and on restart everything appered to be fine but when i cope any files like movies onto new HD it fails telling me some info cant be read or writen but they copy no problem onto my external HD?
View 5 Replies View RelatedI have a g4 quicksilver and I bought a 1TB sata hard drive to put in it. I also bought a pci card to connect the sata harddrive. I disconnected my other hard drive and put in the OS X disc to load the operating system, but when I get to the screen to choose which disc to install it on, my hard drive doesn't appear.
View 4 Replies View RelatedI have a 13" MacBook Pro 2011, 2.3gHz, 320GB. What connector does it have? And would SATA still work with my laptop? One more question, what are the exact dimensions of the hard disk drive bay in my laptop, the manual only says 2.5".
Info:
MacBook
Pro, Mac OS X (10.7.2)
how to install a Samsung SH-S183 sata burner?
Information:
Dual 2.0
Mac OS X (10.4.10)
i've an iMac G5 20" iSight with an intel core duo 2ghz. I would like to know if i can install a sata III hard drive like 128GB Crucial m4 2.5" SSD.
Info:
iMac, Mac OS X (10.6.8)
I have a G4 Mac I wanted to buy a much larger drive. I bought a 1TB SATA internal drive, but when I tried to install it I found out it could not be installed on my G4. The motherboard does not have slots for the cable that came with the SATA drive. The hard drive that came with the computer is Ultra ATA from Seagate 180 GB. I found out that ATA and SATA have completely different configurations. I am planning to return it to the store. Is there anyway I can use the SATA on my G4, or should I just buy a larger Ultra ATA?
View 4 Replies View RelatedThis is about the installation of AHCI drivers to SATA ports for Windows. AHCI drivers (Advanced Host Controller Interface klick -> [URL] Interface for Wiki) are advanced performance drivers for the SATA controller in your Mac Pro (ICH10R chips for Nehalem - ESB2 for all others). When you go to profiler in OS X and bring up ATA you will see that your disks will all be connected by AHCI protocols.
View 24 Replies View RelatedI want to upgrade my wife's Mac Mini (2007, 1.66 GHz Core Duo, model T2300) with a new HDD. I've done that a couple years back, but times were less complicated. Here are my questions:
1) I hope a 7200 rpm drive will improve performance, without generating more noise than a 5400 rpm drive. Is that a correct assumption and would you recommend that?
2) Looks like many of the 500 GB 7200 rpm drives are SATA II. Will that be compatible with the plugs in the machine? Will I have to set any kind of jumper pins (I've never done that, though)? 3) My plan is to naturally do a time machine back up of the current drive to use it to build the new one. However, I still need to install Mac OS X Snow Leopard. The Mac mini came with a Tiger install disc. How do I get to SL with the least trouble? Do I need to start with the original Tiger disc, then use the Leopard disc and finally upgrade with the SL disc or can I use the SL disc right away?
I have a MacBook Pro with a 128GB solid state. Is this SATA II or SATA III?
View 3 Replies View RelatedIm considering purchasing a higher capacity internal hardrive around the 750Gb/1Tb mark. However my macbook is the early 2008 model, and it seems the majority of hardrives are SATA II, having speeds of 3Gbt, which my mother board may not be capable of (apparently only 1.5Gbt) From researching and reading some reviews of others who have purchased internal drives on Amazon UK, some have had difficulty due to this problem, but have been able to fix the issue with a firmware update reducing SATA II drive speeds to 1.5Gbt.
Questions I have: Do all SATA / SATA II internal hardrives need a firmware update if replacing on to a new computer?(If so, would I need to look for a specific firmware update for the specific drive I intend on buying? And if you're in the knowledge would you mind posting links to these updates?)What is the process of updating the firmware i.e. would I need to put firmware on external usb hardrive 1st, then upload it to macbook after installing new internal drive (if it boots up my OS that is) etc. Would a 'hybrid' (disk+solid state) drive be compatible with a macbook as old as mine?Do I need to update my operating system to OS X Lion first, or can it be done after installing the drive?
my current laptop hardware:
Macbook Pro 15.4" (Early 2008 Model)
Intel Core 2 Duo 2.4Ghz ProcessorGeForce 256Mb 8600M GT Graphical Processor
Intel ICH8_M AHCI 1.5 Gbt MotherboardToshiba MK1655GSXF 160Gb 2.5" Hard DriveOperating System: OS X Leopard 10.5.8
Info:
MacBook Pro, Mac OS X (10.5.8), 15.4" 2.4Ghz (Early 2008 Model)
I'm looking for a new HD to replace the original, now failing Maxtor drive in my G5 tower (1.8 Ghz dual processor, purchased in Aug. 2004), and have just about settled on the Western Digital Caviar SE16 series. It seems there are two types -- SATA and SATA II -- and I'm not sure about how to make a decision on which particular WD model to buy.
Will either type work in my machine? Or would the SATA II have potential compatibility problems? I read somewhere in these forums that someone with a G5 had bought an SATA II drive, and it wouldn't run with his system. (He said he had to reset some jumper switches to reduce the transfer rate of the drive ??, but now I'm told elsewhere that SATA drives don't have jumper switches.
Information:
1.8 DP G5, 1.5 GB RAM w/ Superdrive
Mac OS X (10.3.x)
I have ordered my first Mac, a Mini 2.66Ghz and I will put a Intel X25-M SSD in the machine to speed it up further. I hope I will be pleased with it
However, the question I encountered was whether the sata connection in the Mini is SATA-150 or SATA-300? Does anyone know?
I am now shopping for a new internal HD of MAC G5; previous HD died. I have decided on a Western Digital and was about to order one when I became alarmed by the SATA II listings. Is there a difference between SATA and SATAII that I should be concerned about the comptability? Don't want to get it and find out it doesn't work!
View 3 Replies View Related