PowerPC :: Won't Unlock Firewire Driver / After Installation
Aug 27, 2010
I've had to perform a complete clean re installation on my main HD to get my G5 Cypher dual core 2.63 running again with leopard. Somehow when I screwed the main HD it locked me out of my other internal HD and every Firewire drive connected to the computer. Those drives will not show up on the desktop. Is there a back door way for me to unlock them. In Tech Tool Pro, they show up as locked. I tried repairing the permissions with TTP, but it failed. My gut is telling me I might have to buy some data recovery software to get my files off those drives and then reformat them.
I've tried to install the USB Midi driver several times and all I get is a "Install Failed!" (Korg m50)I attempted to install the driver that came with the keyboard (CD) and the one downloaded from Korg.com to no avail. FYI, I have a Macbook 2.4 Ghz, Intel, 2GB Ram running OS X v 10.5.7
Windows 7 has been awesome so far, but there are still the occasional driver issues. What I'm having trouble with now is firewire. I used to use HFS Explorer to access my external (HFS formatted) hard drive but it no longer shows up in HFS Explorer. Windows doesn't even make the "device connected" sound when I turn it on (yes I'm running HFS Explorer in admin mode/Vista compatibility). Pretty sure it's a firewire driver issue, but I have no clue who makes the firewire for my early 08 MBP.
After I installed Snow Leopard everything has been working fine but I installed the latest Brother fax/printer driver and supporting apps yesterday Airport stopped working. So I restarted the computer but still won't turn on, no matter what I do. I'm not 100% sure if they are related but it's hard to believe they are not. I can remove all the Brother related stuff but I still need the printer driver.
Has anybody had this problem and can anybody suggest a solution?
3 days back bought a MacBookPro 2.66ghz i7, 8gb ram, 128SSD. It came with Snow leapord 10.6.3.
I installed Bootcamp > Windows XP 32bit> inserted OS dvd to install Bootcamp drivers Version 3.1 (Build 2232). Now the problem starts.
While installing the drivers, the installer stops at "Installing Audio drivers" and didn't proceed. So, i copied the Bootcamp drivers to local hdd and tried installing again. This time the installer stops at "Installing Apple Keyboard". I tried three times.
I have just purchased a Mac OS X 10.5.6 (Leopard) and I am trying to install this driver link (Scroll to the bottom). When I do I get about half way and it stops and starts at the beginning of the installation. I've noticed that it stops at info.plist. I have been able to install this driver on a Mac OS X 10.4.11 and it works great. The tablet seems to be recognized by Mac OS X 10.5.6 and I can used all the functionality of the tablet that Mac lets you. Such as write and so on and so fourth. The program Art Rage 2.5 works perfectly fine without the drivers but programs like Photoshop need this driver to detect pen pressure. I have contacted Adesso numerous times and have tried to call several times without any response. I'm hoping that someone may have the solution for me or perhaps could help me figure a solution.
Received ibook that belonged to a dead relative(rip) but it requires a user ID and password to log on and we have no clue what it is or how to reset it.
The volume controls aren't working well. I'm using a M-Audio Firewire Audiophile external sound device. There seems to be a headphone level control on the left which sort of works (its continuous so you never know where you are in its range) and a "Level Controller" on the right which doesn't do anything to the sound yet it controls the sound bar in Sys Prefs/Sound. I downloaded the 10.4.11 driver from M-Audio.
Have just purchased an Alba 10MP Webcam (from Argos Ireland) - which according to it's description is plug n play and Mac compatible but I've plugged it into my ibook and no go?
Dual 2ghz Power PC G5 with Leopard 10.5.8Recently had it in for a repair, not with Apple (that expired a longggg time ago) because it would only turn on intermittently. They fixed this problem, citing bad components and also replaced the broken optical drive. However when they gave it back to me it was incredibly loud, they stated that they had to reconnect a fan and that was probably what caused the power problem in the first place. I'm pretty sure though that I had disconnected it unwittingly about a week after the power problem started when I opened it up to change the battery... believing that may be the problem at the time.
Is there any possible way to add usb 2.0 or firewire to my slot loading G3 iMac 350mhz? I would just rather use my iPod with my mac and usb 1 takes forever to put songs on it. I haven't been able to find anything and as far as I know there is no place for expansion cards, so I'm probably just gonna hear a no back on this one.
across an OS 9 disk and it boots and all on my iBook clamshell. Just when I get to the screen where I choose what HD to install it on, there is 'no peripherals'
I recently bought a firewire 800 dual 1.42 GHz G4 power mac, which didn't have a hard drive or memory. I bought some memory from OWC and I threw a hard drive in it. When I press the power button I hear the startup sound however there is no video on the monitor. I'm trying to figure out whether it's a bad motherboard, video card, or if it could possibly be something else like the power supply. I have reset the PMU to no avail. Does anyone have any suggestions on what I could do to figure out which component is bad?
so I bought an ibook G3 500 MHZ from ebay that was listed for parts and fixed it, but it had no hard drive. Right now, it has a 6 GB from my lombard. My question is this- If I buy a 40 GB HD, can i clone the HD from my G4 ibook through firewire? I have the tiger family pack, so I have an extra license for it.
I had a Mac Mini sitting around the house collecting dust, so I thought I'd boot it up to have a small computer in my room. When I booted it up it started with the standard "bung" sound, but then it showed a blank grey screen. After a minute or so the screen turned to black, then came back with the same grey screen, but with a blue folder in the middle flashing a question mark, then the old Mac two faces logo, and continued to switch indefinitely.
Both said that it was unable to open.
I then tried to eject the disc so I could try my other install discs MacBook Pro, but the drive would not eject, and I had to open the Mini up to get the disc physically out of the disc tray. When I tried to do the install with my other install disc it did virtually the same thing with identical error messages. The only way I could get it to do anything different was to hold option on reboot, and the screen would go blue with the old school clock spinning as the cursor, a button that had a arrow pointing to the right (like "next") and a button with an arrow that looked like a "refresh." "Next" didn't work even after multiple "refresh"es, even though clicking refresh definitely started whatever process it was doing over again.
I recently tried to upgrade my powerbook with a new HD (see but forgot to format the drive before trying to install the operating system. I gave it another go last night but with the new disk installed and everything back in place, it would not power back up. I took it to bits again and checked everthing was connected including the little ribbon cable from the keyboard but still nothing. I put the old disk back in with the same results. there is no response from the power key at all. Everything is pushed home where it should be so I'm a lttle worried about what could have happened.
Would someone please tell me the steps to connect my MacBook to my Emac, so that I can transfer some files between them? I have a firewire cord plugged in to both. I thought I should use Sharing but the harddrive never appeared on the desktop. I know it's probably done very simply, but I just don't know how.
I'm attempting to upgrade a family member 800mhz iBook G3 from 10.2 to 10.4 using my old iPod as the install drive. (Restored a DMG, etc) Only problem is that (other than being an ancient computer, I guess) is that said iBook doesn't see the iPod until after OSX loads (white spinny guy).
Tried holding Alt at bootup (not listed), setting it as the default boot device (just skips it and goes right to the HD), and just running it from OSX (reboots, straight back to OSX desktop).
Is there something I'm missing? Does this model G3 not allow detecting boot devices at start up? I'm kind of at a brick wall here. Should I just bite the bullet and do a target disk install?
My 1.2 GHz G4 iBooks Firewire stopped working recently. Have tried zapping pram, reloading OSX etc but no luck. Fortunately USB is still working fine so I can still use my external 500GB hard drive, but I can't download video from my aging Sony video cam.
Any suggestions, other than chucking it and getting a new Macbook/Pro? (Which I plan to do sometime anyway, but would rather prolong the life of my iBook for the moment if possible)
I have a 2004 iBook G4. My internal HD broke yesterday, but I have a backup on an external firewire HD enclosure, made using CCC. I've tried to boot from it using the startup disk tool on the install DVD: it comes up as a useable startup disk, but when it restarts I get the blinking folder icon for a few seconds, and then it boots from the internal HD (or tries to.)
Disk utility says it is bootable, I can mount it and edit files using single user mode from the internal HD, etcetc, but it just won't boot from it.
I've even tried to go into Open Firmware and boot yaboot from the external drive, but it doesn't seem to see the drive at all until after OS X is booted.
I have a MBP intel that I made a clone off via superduper on my portable firewire hd. I'm trying to get my power mac g5 to boot off of the clone via the portable hd.I've tried checking Startup Disk within the sys pref area but it does not list the portable hd there, although, I am able to see the hd on the desktop (add, del, move files etc)so the portable hd is working fine.I've also tried booting up holding down the Option key but it doesn't work, I think it is because I am using a wireless logitech pc keyboard (no i dont have any other keyboard to use unfortunately).I did a search and apple said to make sure that I update my firmware? Not sure where to find that specific firmware to make this work.
My powermac G5 has been off for a week while I was moving apartments. When I plugged it in again the external harddrives (four in all) that were daisy chained through the two firewire ports aren't being recognized anymore. I thought it was a bad cord or insufficient power but nothing worked. When I finally got around to looking at the System Profiler and check Firewire it said, "Unable to list firewire devices". I admit that I'm at a loss and I have no idea how to troubleshoot this.
I recently acquired a G4 cube with no os. It came with the original disks, but the only problem is instead of booting from them a flashing question mark on a floppy drive is shown. I have tried resetting the PRAM and NVRAM which hasn't worked.
I need to reseat my Airport Extreme card and I don't know where it is or how to do it on this "mid-2005" model. Please point me to the appropriate URL that has diagrams. For some reason, the "mid 2005" g4 iBooks have a different Airport card removal and replacement procedure than the earlier models. Because, I suppose, airport cards were standard, i.e., not optional, with this model, the install process is not included in the manual. But you'd think that all I'd have to do is search the Apple site for "g4 ibook 1.33 airport card" or similar keywords and the instructions for removal and installation would be returned. Ha! and Double-Ha! Here are the official results of the above keywords:
I recently have recieved an ibook with osx 10.3.9 that doesnt have any wireless internet. Since i have a wireless adapter, i decided to install it on so i can use this computer for internet. Since the driver for the installer is only for newer osx versions i decided to upgrade my os. I knew that my cd-rw/dvd-rom drive isnt working so i booted disk1 of the cd-installation from my old ipod. Now it wants disk 2 and when i put in my ipod with the second disk it wont continue installation.
I had a Dell 1100 laser printer working on my iMac (G4 ball type) using a GIMP printer. I had to reset the queue and lost the driver. I can't remember which GIMP driver I used. Also, although I have loaded the latest GIMP s/w, I can't seem to get to them in Tiger 10.4.6.
Here's what's happening: We can connect the iBook to the MacBook with a FireWire cable and boot the iBook into FireWire Target Disk Mode (TDM) successfully. The MacBook recognizes the iBook and mounts it as a drive on the desktop. When we try to launch Migration Assistant, it asks us where the old data is located. Specifying another Mac (which is the logical choice) causes it to beachball for about 10 minutes then tell us to connect the two computers with a FireWire cable and boot the other one into TDM, which we've already done. Choosing from a Time Machine backup or other disk causes it to display a blank window, as if it can't detect any other systems.
I recently installed a new 250 GB hard drive in my 800MHZ emac. I did a nice clean install of 10.4 on it and all was going well. The problem is that it randomly freezes after about 10 or 20 minutes. Mouse locks up, keyboard doesn't work.I tried pinging it from another computer and there was no response. I hold the power button in to shut it down and when it reboots it works fine for a while and then freezes again. I checked the console and it had this:
Mac OS X Version 10.4 (Build 8A428) 2006-02-10 20:36:25 -0500 2006-02-10 20:36:26.072 loginwindow[84] FSResolveAliasWithMountFlags returned err = -1407
I ran the disk utilty checks and they come up clean. I have tried reinstalling os x with no luck.
