PowerPC :: Power Mac G5 - Cannot Boot From Firewire Portable Hd?
Aug 18, 2009
I have a MBP intel that I made a clone off via superduper on my portable firewire hd. I'm trying to get my power mac g5 to boot off of the clone via the portable hd.I've tried checking Startup Disk within the sys pref area but it does not list the portable hd there, although, I am able to see the hd on the desktop (add, del, move files etc)so the portable hd is working fine.I've also tried booting up holding down the Option key but it doesn't work, I think it is because I am using a wireless logitech pc keyboard (no i dont have any other keyboard to use unfortunately).I did a search and apple said to make sure that I update my firmware? Not sure where to find that specific firmware to make this work.
View 8 Replies
ADVERTISEMENT
Feb 16, 2012
I did a bunch of research and found a bunch of conflicting information. My question to you all is this:are there any good, portable external hard drives that support both FireWire and USB?I have an iMac and an MB Pro, but a lot of people I know don't; I would like to use the FireWire and still be able to use the hard drive with others' computers who do not.I was looking for something that: did not require an actual electrical plug (wanted the USB/FireWire to be used as the power source)is at least 1TB (would prefer 1.5TB)is (preferably but doesn't have to be) rugged.I plan on doing some traveling and whatnot and just throwing it my bag; I'd probably go a while without having a chance to really maintain it, hence my wanting these things.
The main ones I was looking at are the LaCie MiniRugged, LaCie Rugged, Transcend Storejet 25H2P and 25M2, and the Seagate FreeAgent GoFlex.Unfortunately, I've either heard bad reviews or they don't meet all my criteria. The LaCies, for example, were said by some to be outdated, flimsy, etc. (and the mini doesn't have a FireWire port).The Transcends don't do FireWire, nor does the Seagate.In case anyone was wondering, I included the Seagate becaue I have a friend who just got back from a year-long trip bumming around Asia with it and it stood up fine (but, again, no FireWire) I was wondering if anyone could suggest anything.
Info:
MacBookPro, Mac OS X (10.7.3)
View 3 Replies
View Related
Feb 17, 2009
I have a 2004 iBook G4. My internal HD broke yesterday, but I have a backup on an external firewire HD enclosure, made using CCC. I've tried to boot from it using the startup disk tool on the install DVD: it comes up as a useable startup disk, but when it restarts I get the blinking folder icon for a few seconds, and then it boots from the internal HD (or tries to.)
Disk utility says it is bootable, I can mount it and edit files using single user mode from the internal HD, etcetc, but it just won't boot from it.
I've even tried to go into Open Firmware and boot yaboot from the external drive, but it doesn't seem to see the drive at all until after OS X is booted.
View 20 Replies
View Related
Oct 26, 2008
Broken harddrive, dont wanna get a new internal one, I need to boot from external firewire.
View 5 Replies
View Related
Jan 9, 2011
With a firewire drive, can I have the drive hooked up to my iMac via firewire, but also have it accessed through USB to my Time Capsule for wireless access?
View 2 Replies
View Related
Jun 19, 2010
I have found that by plugging in my Apogee Duet firewire audio interface and ONLY WHEN AppleFWAudio was loaded there was a 10c CPU raise that was making my MBP (late 2008) hot!I wanted to monitor the power that was required for Duet to run and to see if the temperature rise was due to that, so:With Apogee drivers uninstalled (just to be sure its not their drivers related, which is notMBP on battery power with System Profiler opened (to monitor the mA required by the computer from System Profiler -> Power)
View 5 Replies
View Related
May 13, 2007
I'm looking to buy a portable hard drive for my g4 powerbook. the USB power from the G4 powerbooks isn't strong enough to support some hdds.
View 3 Replies
View Related
Mar 25, 2012
MacBook Pro 15" (15-inch Core 2 Duo) late 2006 this apple macbook boot lion from usb or firewire ext hdd or usb stick which of 3 better must boot Lion on ext device? or none at all?
View 14 Replies
View Related
Oct 13, 2010
Is it possible to boot from an external Firewire DVD Drive? It certainly isnt from an external USB DVD. Real answers only please, not "I think so" ones based on HDDs or rumours you may have heard!...
Background:
I've got an MCE Optibay in my Mid-2010 i7 MBP. When installing Bootcamp it refuses to install from the external USB DVD drive. In the end I pulled the 2nd HDD out and reconnected the internal DVD. It then worked fine without a hitch. Then I reinstalled the 2nd HDD and all was fine for a few days.
Now I want to resize my Win7 partition (bigger, as MS Visual Studio's bigger than I thought, and I might stick some games on). I can shrink the OSX partition fine with Disk Utility, but windows won't grow the Win7 one because the empty space is before the Win7 partition, not after it. Apparently this can be done with GParted. Guess what? I can't boot the Linux based GParted CDROM from the external USB DVD drive! So, will a Firewire one work where USB fails, and solve my alternative OS booting issues? If I buy one I can then either use GParted, or delete the Win7 partition and start again without having to pull the laptop to bits all over again, only to put it back once I'm done, and possibly have the same issues in the future. Obviously I don't want to blow extra money getting a Firewire DVD drive though if it's a waste of money...
View 8 Replies
View Related
Mar 14, 2010
I have an iMac G5 (version10.5.8) and I'd like to transfer images and stuff from my laptop powerbook G4 (not sure of the version but it uses Tiger) onto the iMac. I was wondering which would be the best choice. I need a decent size as I'm a photography student and I take tons of large sized images. Would also need to possibly transfer programs also.
View 9 Replies
View Related
Nov 26, 2007
I have a great G5 Dual Processor, and would like to add a PCI-X card to give me more Firewire connections. I have been all over the internet and made a lot of phone calls, but no one seems to have a clue as to where such a beast may be found. If not, are there any work-arounds?
Information:
G5
Mac OS X (10.4.10)
Run several Macs at work & home
View 2 Replies
View Related
Nov 13, 2007
I want to add a second external drive, either 500 GB or 750 GB. It would be partitioned into one partition for cloning, and the other for TimeMachine when I upgrade to Leopard. Currently my external drives are all Firewire. Would there be any significant advantage for me to buy a SATA controller card for my G5 and then go to eSATA rather than Firewire? One online dealer I contacted said that the speed advantage for the SATA for my uses would be minimal, but the possible headaches of eSATA over Firewire could be signifcant. I"m conisedering the 750 GB LaCie d2 Quadra drive.
Information:
G5 Dual 2.0, 2GB RAM
Mac OS X (10.4.10)
also running IMac Intel 2.0/2
View 2 Replies
View Related
Dec 2, 2007
3 times in the last week, my 400 & 800 firewire ports are not working. I am using a firewire hub with several external drives. I unplug everything, reboot and then they work. anyone know what is going on?
Information:
Power Mac G5
Mac OS X (10.4.2)
View 2 Replies
View Related
Dec 13, 2007
Both my firewire ports are not working. No signal or connection with external hard drive or video camera. Firewire does not appear under Network Status and is grayed out under Network Port Configurations.
Information:
PowerMac G5
Mac OS X (10.4.11)
View 2 Replies
View Related
Jun 30, 2012
I installed Mac OS X Tiger (10.4) on to my iPod. I tried booting on my Power Mac, which I used to install OS X, but no video. It won't even boot to X on my MacBook! What should I do?
Info:
iPod 2G, Mac OS X (10.4)
View 1 Replies
View Related
Mar 16, 2009
I was wondering if theres an external similar to the Mypassport that runs firewire 400 or 800?
View 9 Replies
View Related
Mar 15, 2012
When I plug in a DV camera to the 400 firewire buss and go to system profile/firewire, the DV camera doesn't show up.....but, when I turn the firewire hard drives off (pull their power) thus disconnecting them from the 800 firewire buss, the DV camera shows up....
If I have my firewire external drives connected to the 800 firewire port, and the DV camera connected to the 400 firewire port sometimes (not often) the the dv camera works, most of the time it doesn't..The only way I can get the dv camera to work is to disconnect the firewire hard drives from the computer then all is good in the land of "MAC)..
Info:
G5, Mac OS X (10.3.x)
View 4 Replies
View Related
Mar 16, 2012
I am going to buy a new 17" MacBook Pro soon and I've been doing research on how to customize it when I get it. I want to install my own SLC SSD as the internal drive because it's cheaper and has a longer life expectancy. Because of the limited capacity of SSDs these days, I am also going to be getting an external HDD to keep all my data that would not benefit greatly from SSD speeds, as well as for backups of everything on the internal SSD.
I wanted this external HDD to meet three criteria:1TB capacity7200rpm speed2.5" size, so that I can use it without needing to plug it into a power socket There aren't many options to choose from that meet those requirements. In fact, I only found one candidate, the “Seagate Constellation.2”. It looks like a good set of specs and Seagate is a reputable hard disk maker I've read, so I'm just about ready to buy one. My only point of concern is whether it can be powered and operated solely over FireWire, or if I would have to use a power adapter.
So my question is, can the 17" MBP (Late 2011) supply enough watts/volts/amps over FireWire 800 in order to power this Seagate disk? (Sorry for rambling too much) I have looked at the spec sheet and read up on IEEE 1394, i.e. FireWire, and I wasn't able to come up with a definitive answer, and I'm not even confident about how these electronics operate (specifically if the watt/volt/ampere requirements have to be met precisely or if they can go over or under a little, or a lot). I hope someone helps me out here.
Now here are the relevant specs, from the ST91000640NS product page: 12V start max current0.85A5V start max current0.51AAverage idle power2.95WAverage operating power5.43W According to Wikipedia's article on IEEE 1394, FireWire can supply a maximum of 45W and 30V. Apple's FireWire Ports Specifications article says: Input voltage range8 to 33 VInput power0.3 WOutput voltage range12 V to 30 V (varies by product)Output powerminimum of 7 W per port The disk will be put in an OWC Mercury Elite Pro Mini enclosure, by the way.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 6 Replies
View Related
Dec 26, 2007
The firewire port on the front of my machine is bad. I can't transfer any kind of data using it. The port on the back as well as all USB ports work fine. Would this need a complete motherboard replacement? Would it even be worth doing? Could I build a dual processing machine or buy one cheaper?
Information:
G5
Mac OS X (10.4.4)
View 4 Replies
View Related
Nov 13, 2010
I have to get a external drive for backup with Time Machine. Everyone says to get Firewire I guess because its faster...but.Do you need to use the power cord for those? I know some USB drives you can only use the USB cable and it powers it which is handy because I move the drive a lot and I hate connecting two cables....do firewire drives need both cables?
View 9 Replies
View Related
Dec 6, 2007
I added 2 sticks of 512 to my power mac g5 1.6. I had ahard time getting the computer to see the new ram, but finally was able to kinda get it working after zapping the pram. However my computer only saw these 2 sticks as 256, odd. So i attempted to troubleshoot the problem. I tried just installing the new ram, but the computer wouldnt boot. I tried a few different combos with the other 4 sticks i had, but nothing. I put the old memory back in, and still nothing. The power led looks to blink once every five seconds or so. I tried pressing the pmu reset button, but still the same out come. I also tried taking out the battery, nothing.
Information:
1.6 g5 single proc
Mac OS X (10.5.1)
View 15 Replies
View Related
Mar 8, 2008
Can I boot to an .iso on a firewire drive? I've been having trouble with my disc drive lately, so this is how I'm trying to work around it
View 1 Replies
View Related
Mar 8, 2009
I recently had to take my mac mini to pieces to upgrade its RAM to 2GB. I initially had problems with booting up - it would get to the white screen with the apple logo and think for about 2 minutes then restart and repeat the process indefinitely. I managed to fix this by removing the clock battery for a while. I also zapped the PRAM after installing. But now, the strange problem is that OS X wont boot up (it will get to the white screen, think, then restart) if my firewire devices are connected. In case this helps, I have two HDDs and a DVD burner connected in daisychain to the firewire port. It definitely boots up fine with any other peripherals/connections. Once OS X has booted successfully, I can then connect my Firewire devices which seem to work fine.
I have tested my new RAM with memtest and rember and everything seems fine. After upgrading my RAM, I would also get two alerts on start up - "Do you want the application "configd" to accept incoming network connections" and "Do you want the application "mdnsresponder" to accept incoming network connections ". I have fixed this problem with the help of this post: [URL]. Aside from the horrible idea that I have damaged some hardware, does anyone have any clues as to how I can mend this? A wise colleague of mine said that if it was a windows machine, he would look at the BIOS settings as he thinks my computer is trying to boot from one of the HDDs, and that I should try to find a list of boot drives and remove the firewire HDDs if they're on it. I know macs don't run BIOS, but is there anything similar I could check?
View 2 Replies
View Related
Oct 31, 2009
I have a cramped windows partition on my hard drive which is now full, I'd love to reclaim the space by moving it to my Firewire hard drive which has much more available to dedicate to Windows. I used the "Restore" feature of Disk Utility creating an identical copy but when I restarted my computer to boot from it there was no choice of a firewire drive. I checked in the Startup Disk pref pane it wasn't to be seen, and that didn't even show the current Windows partition that was an option when I restarted. When I get info on the volumes in disk utility it says EXACTLY the same thing about each. So needless to say, I'm slightly annoyed but somehow I think I'm trying to get it to work in a way that it can't.
View 2 Replies
View Related
May 11, 2010
If I have a SSD enclosed in an firewire case can I use the same hard drive to boot both the MBP and the iMac?
View 11 Replies
View Related
Jul 2, 2012
I need to start up my macbook via a firewire cable from my imac. is this possible and what cable do I need exactly.
Info:Mac OS X (10.7.3), itouch
View 4 Replies
View Related
Dec 20, 2007
This is bad and old, and full of lessons about backing up. Anyway, internal boot drive crashed a week ago, and internal optical drive is busted. New external LaCie dvd burner works fine, but all attempts to start up from Tiger, Leopard and Diskwarrior installation disks just end up back in OS10.3 on my external LaCie FW drive. I've tried many things: unplugged everything; switched external LaCie to USB (wouldn't boot), unplugged power from internal optical drive so Mac wouldn't look there first (somebody suggested that). Attempts to start up installers from mounted DVDs result in installer screen with restart button, which, when clicked on, results in... you guessed it... boot back to dreaded 10.3 system. Night owls and westcoasters, I am up for hours yet, pulling hair.
Information:
G5 Dual 2GHz
Mac OS X (10.4.3)
View 4 Replies
View Related
Apr 15, 2009
I have a WD Terabyte drive that I have used for over a year with no problems. A couple of days ago my roommate went to use it and disconnected the drive from my computer without ejecting it first. He used it with his PC and disconnected it without "safely removing" it from his computer and now it will not mount to my desktop of been seen by PC. Disk Utility sees the device but I get an error when I try to repair the disk or verify the disk. It gives me an "error on exit" message. I really need the 700GB of info on that drive. Don't know what to do next.
Information:
Powerbook G4
Mac OS X (10.4.11)
View 14 Replies
View Related
Dec 20, 2009
Someone switched off the power to my iMac the other day. Since I've rebooted:a] System Profiler shows no awareness of FireWire ("Unable to list FireWire devices" in red) b] Every boot takes about five minutes, 3+ of which seems to be spent waiting for a response from the FireWire socket (the logs show a 3-minute gap followed by a line that goes something like this:"/usr/lib/exec/hidd: Timeout waiting for IOKit to be quiet")
c] if it's idle long enough to go to sleep, it goes into a kernel panic (the last line in the log before the panic says"kernel[0]: IOPMSlotsMacRISC4::determineSleepSupport has canSleep true")b] looks connected to a], but I can't see any connection with c] (apart from the reference to IO).
View 2 Replies
View Related
Aug 30, 2010
can I boot from my HP iPod via firewire on a 2007 imac or an i7 MBP? in other words, do early iPods play nice w/ intel macs via firewire? the reason I ask is because I'm tempted by OWC's 40GB SSD sale and want to try SSD's without the risk that comes w/ surgery (save for the old iPod).
View 5 Replies
View Related
