PowerPC :: IBook Won't Boot From Firewire Harddrive?
Feb 17, 2009
I have a 2004 iBook G4. My internal HD broke yesterday, but I have a backup on an external firewire HD enclosure, made using CCC. I've tried to boot from it using the startup disk tool on the install DVD: it comes up as a useable startup disk, but when it restarts I get the blinking folder icon for a few seconds, and then it boots from the internal HD (or tries to.)
Disk utility says it is bootable, I can mount it and edit files using single user mode from the internal HD, etcetc, but it just won't boot from it.
I've even tried to go into Open Firmware and boot yaboot from the external drive, but it doesn't seem to see the drive at all until after OS X is booted.
I have a white g3 ibook dual usb. I put in a bigger hard drive and can't install tiger which is a cd not dvd that boots fine in my imac. Cd drive will not eject with eject (f12) key or fn f12. I have to pull it open manually. I can reset the nvram by booting into firmware and typing reset all. I can't boot up to a screen with a refresh arrow and a right arrow that I can click on but nothing happens. All I get a start up is a folder with a blinkin face question mark.
I have the harddrive from my IBookg4 that crapped out. Do you know of any way that I can get the content off of this Harddrive onto more current computer.
broken ibook. after starting it up for the first time the internal harddrive and the touchpad dont work. when i attach an external usb mouse i can boot from cd. is this a logic board failure and i am out of luck or could it just be a loose connection or something else repairable?
I feel incredibly dumb but can you buy something to put inside an ibook (or any laptop for that matter) to give you more space to save things? or do you have to buy an external drive? I can see lots of info about memory upgrading (which makes your computer more efficient yeah?) but nothing about this, is this because it's so obvious that I should know?
i am new to this forum and everybody seams nice, but i have come over a problem, my ibook g4 1.33ghz, 512 ram, 40 GB harddrive, 12.1 inch runing leopard 10.5.6. is now not verifying my external harddrive i have a seagate freeagent pro 500 GB. it was working fine for almost a half of a year. i know that the harddrive has a 5 year worinty but i dont want to lose all my stuff on the harddrive because i have most of my stuff on there like all of my photography stuff. and it asks me if i want to verify the drive or repair the drive and i tryed both of them and it says it failed both so then its telling me to back all of the files up and erase the disk and i dont have anywere to put all my files because the internal 40 GB harddrive isnt enough space to back it all up. so what i would like to know if there is another way to do this ?
so I bought an ibook G3 500 MHZ from ebay that was listed for parts and fixed it, but it had no hard drive. Right now, it has a 6 GB from my lombard. My question is this- If I buy a 40 GB HD, can i clone the HD from my G4 ibook through firewire? I have the tiger family pack, so I have an extra license for it.
Today I was planning to build in a second harddrive into my old G4 tower. So I did this. But after installing the system won't boot anymore from the OS X Tiger partition. I have tried all sorts of jumper settings, from slave to master to cable select. All without success.
When I boot from the Tiger installation CD diskutility does not even recognize my original master drive nor does it recognize the new slave drive. I even tried to boot from an old OS9 disk to initialize the disk. I tried formatting it in another machine to HFS Journaled, no success in booting mounting the disk whatsoever.
I recently added some extra RAM's but i doubt these are the problem since my machine DOES boot without having the new disk installed in the system.
It is a 60GB Maxtor drive, so it is within the maximum amount of GB's possible for these older machines.
I'm attempting to upgrade a family member 800mhz iBook G3 from 10.2 to 10.4 using my old iPod as the install drive. (Restored a DMG, etc) Only problem is that (other than being an ancient computer, I guess) is that said iBook doesn't see the iPod until after OSX loads (white spinny guy).
Tried holding Alt at bootup (not listed), setting it as the default boot device (just skips it and goes right to the HD), and just running it from OSX (reboots, straight back to OSX desktop).
Is there something I'm missing? Does this model G3 not allow detecting boot devices at start up? I'm kind of at a brick wall here. Should I just bite the bullet and do a target disk install?
My 1.2 GHz G4 iBooks Firewire stopped working recently. Have tried zapping pram, reloading OSX etc but no luck. Fortunately USB is still working fine so I can still use my external 500GB hard drive, but I can't download video from my aging Sony video cam.
Any suggestions, other than chucking it and getting a new Macbook/Pro? (Which I plan to do sometime anyway, but would rather prolong the life of my iBook for the moment if possible)
I have a G3 iBook and just the other day the display stopped working. There were no signs of the display going bad, it's just went. Am I able to boot the iBook via Target Disk Mode on my PowerBook and run the iBook Hardware Test CD on it? Also, can I reboot my PowerBook and choose the iBook as the startup volume?
I know how to do Target Disk Mode but the latter I'm not sure about.
Here's what's happening: We can connect the iBook to the MacBook with a FireWire cable and boot the iBook into FireWire Target Disk Mode (TDM) successfully. The MacBook recognizes the iBook and mounts it as a drive on the desktop. When we try to launch Migration Assistant, it asks us where the old data is located. Specifying another Mac (which is the logical choice) causes it to beachball for about 10 minutes then tell us to connect the two computers with a FireWire cable and boot the other one into TDM, which we've already done. Choosing from a Time Machine backup or other disk causes it to display a blank window, as if it can't detect any other systems.
I have an iBook G4 1.07 GHz 30 gb 256 RAM with Panther. It was working fine until my HD got close to being full. Now I can't get it to boot past the Apple screen. It will either freeze there, or move on to the blue screen and freeze before the progress bar enters. I want to re-install Panther but I can't get any CD to boot during startup by holding "C", including the Panther OS CD, the Hardware Test CD, or the Tech Tool CD. I am able to boot to single user mode, where I type fsck -fy, and I recieve no errors with the hardware. I had this issue beore and my HD had to be replaced by Apple.
I have a MBP intel that I made a clone off via superduper on my portable firewire hd. I'm trying to get my power mac g5 to boot off of the clone via the portable hd.I've tried checking Startup Disk within the sys pref area but it does not list the portable hd there, although, I am able to see the hd on the desktop (add, del, move files etc)so the portable hd is working fine.I've also tried booting up holding down the Option key but it doesn't work, I think it is because I am using a wireless logitech pc keyboard (no i dont have any other keyboard to use unfortunately).I did a search and apple said to make sure that I update my firmware? Not sure where to find that specific firmware to make this work.
I just got the external harddrive "Seagate FreeAgent GoFlex USB 3.0 1TB" with a Seagate FreeAgent GoFlex Upgrade Kabel FireWire 800. I have neither a USB 3.0, nor a Firewire 800 on my white macbook (2008). I already know, that it's possible to use USB 3.0 with an USB 2.0 port, but I would like to use it with the firewire to spare the USB port for other devices. My question: Is there an adapter or cable to use the Seagate Firewire 800 with my Firewire 400 port? I don't know, where and what to look for.
Info: MacBook (13-inch Early 2008), Mac OS X (10.6.8)
I was playing some old freeware games for Mac OS 9 and was playing lemmings when my Clamshell iBook just turned off and now I get the Blinking folder with question mark. I made a live CD of ubuntu where it's talking to the harddrive but the iBook won't boot to OS X so i am trying to figure why.
My friend just got a 800 Mhz iBook G3 from someone. I think it's the April 2003 model. It has a CD-ROM drive so I think it's that one. The iBook has Mac OS X 10.4 Tiger on it. The problem is that in normal boot, it hangs right before the "Starting Mac OS X" screen with the bar. The mouse pointer just stays in the corner. The computer can boot into Safe Boot. He tried reinstalling the OS with Archive And Install keeping the same settings but it still does it. Apparently he says that he had to boot into the Mac OS X Install Disc in safe mode by holding shift. Starting the computer holding Option and selecting the Install Disc caused the installer caused it to hang in the same way. He is currently doing another Archive And Install with the keep settings box unchecked and has yet to do an Erase And Install.
I have a G4 Ibook, been having a problem with it about a week where it wont boot up, it switches on, makes the apple noise and even gets to the screen where the apple logo is showing with the timer at the botto,. problem is it stays there! Before i would turn off and on and try a few times and i would eventually get lucky, but obviously something is not right.What can i do? and if i can get it on what programme shall i run to check it?
I have seen this talked about a fair bit, but i thought i'd start my own thread because it seems slightly different.
To start, when the computer was last running, the (what sounded like fan) started making a terrible noise, then stopped, and the computer turned off.
After that, when booting, it just goes to a grey/blue screen and sits there.
I have an iBook G4, 1064mhz, 256/30.
I dont know what model that makes it, but from the Mac website, I have tried to reset the PRAM to no avail. All of the methods listed do not seem to do anything on my ibook.
I tried using this link to reset the [URL]
I dont know which one is for my model, but i see no reset button under the keyboard, or on the case. There is a little tiny hole on the case beside the LCD???
I have tried the shift-ctrl-opt-power but it doesnt do anything.
As well, i did hold down the "option" button when booting, and it brings me to a screen which shows an image of a hard drive with a green "x"
I dont know if the green means good or the X means bad..
I have read that resetting PRAM and/or changing the resolution seem to help the problem, but I do not know how to do either.
After installing an app ('Detour') I was asked to (or it was suggested that I should) restart my computer. I did so, and now my 1.33GHz iBook G4 turns on - but it will not go any further than a blank blue screen (after the initial grey screen that appears.) Thankfully, all my data is on an external drive. I keep my music and footage which I have shot on there amongst other things. I also have a backup on my external via Time Machine of all my data which I keep on the iBook drive, so nothing should be lost.
I just received a iBook (1.2 30GB 512mb) no cd include, but I have a macbook tiger cd. I wanted to do a fresh installation of tiger or even leopard but when I have the macbook tiger cd and press "C" it just goes start to the desktop without loading the CD.When I load any CD/DVD i am about to view the content of the CD/DVD within tiger, but I just can't boot it to do a fresh installation. Also when I click on Option, it doesn't give me the option to set the boot devise.
i found an old clamshell ibook today. it started right up and all; seemed to work fine. well, now it wont boot at all. im by no means talented in this area, but i love to tinker around with stuff, i tried putting an airport extreme card into the wireless slot, and of course i dont think to shut the machine down to pull it back out. basically the screen distorted and froze. did the logic board get toasted?
My iBook g3 recently had a new 40 gb hard drive put in. Now when i try to install mac os 9.1 and 10.0.3 ( Both on the same disk labeled for iBook) I get nothing. I hear the CD tray run, but then it stops and displays the flashing question mark. Ive tried booting in open firmware, resetting pram and nvram but it still wont boot.
My beloved iBook 1.33 wont boot, has flashing? and freezes when I try to boot from original CD with a bunch of vertical lines. I ran the diagnostic DVD and it says Invalid memory access. I removed the external ram chip for computer and still get same error. I also zapped PRAM, reset NMVU (whatever it's called). I already have the iBooks case open and willing to try anything.
This iBook G4 will not boot. I can boot it into safe mode, but that is about it. I have tried resetting the PRAM, to no avail. It cannot even boot off of an OSX disc. When I try to boot it normally, it just shows the Apple symbol, but no progress wheel thing spinning. When I try to boot it normally, it appears as if the hard drive is not being read from/written to, because it is dead silent, but when I boot into safe mode, you can hear the HDD noise. When I booted into safe mode, I checked the HDD's SMART status, and it says "Verified," so I do not think that the HDD is at fault. However, it still has its original HDD from 2004.
I'm trying to resurrect an iBook (translucent white case, 14.1 LCD) that was long neglected, so not sure on its past service history. The following do NOT work: - won't boot up past the gray screen with Apple logo and spinning gear icon (just hangs) - same problem if I try to boot from install DVD ("c" or using "option" then selecting DVD) - same problem with safe boot with "shift" - reset PRAM It will connect via firewire target disk mode to another computer, and I used that to completely wipe the disk and do a clean install of 10.5. When I tried booting into single-user mode (cmd-s), it fills about 2/3 of the screen with normal-looking messages, but then hangs after this (no keyboard response): Got boot device = IOService... [various other stuff] BSD root: disk0s6, major 14, minor 5 I'm out of ideas. Any suggestions? The machine is old enough that it's probably not worth the diagnostic fee of the local Apple shop. Since I can't get it to boot, I can't even run TechTools.
The iMac forum is clogged with news of the new iMac, so I decided to post my problem here: I just bought a friends old iBook G3 for writing and surfing the web. It's slow and full of his junk. He doesn't have the original disks, so I was wondering, would the install disks from my Intel iMac work on it?
