PowerPC :: OS 9 Installation - No Peripherals
Nov 12, 2009across an OS 9 disk and it boots and all on my iBook clamshell. Just when I get to the screen where I choose what HD to install it on, there is 'no peripherals'
View 1 Replies
ADVERTISEMENT
Windows On Mac :: 7 RC Without Wired Peripherals?
May 5, 2009Have downloaded and burned both 32/64bit versions in case of driver support issues.
As I custom configured my iMac, I only have wireless keyboard/ wireless mighty mouse.
Is it possible to go through a windows 7 RC install without wired peripherals? ie, is the bluetooth initiated during the install process?
Using a 2009 iMac, 3.06/4GB/1TB/4850
MacBook Pro :: Bluetooth Peripherals Won't Connect?
Jun 7, 2012bluetooth peripherals won't connect
View 1 Replies View RelatedMacBook Pro :: FW400 Port Not Recognizing Any Peripherals
Aug 27, 2010I recently bought a used (early 2008) MBPro 15" 2.5 SR to do some video editing. Unfortunately it will not recognize my Sony DV camera, or an external HD connected via FW400 or my 12" PB booted in target disk mode. The camera and the hard drive both mount instantly on my 12" PB and a friends 15" PB. Also, when I check the Firewire status under System Profiler all it says is: Warning: Unable to list FireWire devices (in red). This is regardless of what is connected to the port or if nothing is connected to the port. I have tried rebooting the PRAM and changing the Firewire port's network preference to OFF as recommended by this post: [URL]
View 1 Replies View RelatedHardware :: Firewire Wont Read Peripherals
May 5, 2008i have a mac mini which up until recently was working fine. now it won't read my external lacie drive, my lacie d2 burner or my m-audio firewire solo. i've tried rebooting, unplugging, replugging, switching cables...all to no avail. i hate to think that i have several hundred dollars worth of paperweights now. the system profiler recognizes that i have a firewire port, only when i plug something in it doesn't read it. are the ports on my peripherals fried?
View 7 Replies View RelatedMacBook Air :: USB3 Compatible With USB2 Peripherals?
Jul 3, 2012Can USB2 peripherals (hard drives, USB microphones, et al) be used with a MacBook Air that only has USB3 jacks?
View 4 Replies View RelatedPowerPC :: Mac Mini OS Installation Guide?
Jan 12, 2011I had a Mac Mini sitting around the house collecting dust, so I thought I'd boot it up to have a small computer in my room. When I booted it up it started with the standard "bung" sound, but then it showed a blank grey screen. After a minute or so the screen turned to black, then came back with the same grey screen, but with a blue folder in the middle flashing a question mark, then the old Mac two faces logo, and continued to switch indefinitely.
Both said that it was unable to open.
I then tried to eject the disc so I could try my other install discs MacBook Pro, but the drive would not eject, and I had to open the Mini up to get the disc physically out of the disc tray. When I tried to do the install with my other install disc it did virtually the same thing with identical error messages. The only way I could get it to do anything different was to hold option on reboot, and the screen would go blue with the old school clock spinning as the cursor, a button that had a arrow pointing to the right (like "next") and a button with an arrow that looked like a "refresh." "Next" didn't work even after multiple "refresh"es, even though clicking refresh definitely started whatever process it was doing over again.
PowerPC :: IBook G3 Airport Installation?
Feb 5, 2007[URL] What 2 tabs is it talking about? Apple is very specific... >_>*
View 1 Replies View RelatedPowerPC :: Powerbook Will Not Power On After HD Installation?
Mar 31, 2009I recently tried to upgrade my powerbook with a new HD (see but forgot to format the drive before trying to install the operating system. I gave it another go last night but with the new disk installed and everything back in place, it would not power back up. I took it to bits again and checked everthing was connected including the little ribbon cable from the keyboard but still nothing. I put the old disk back in with the same results. there is no response from the power key at all. Everything is pushed home where it should be so I'm a lttle worried about what could have happened.
View 1 Replies View RelatedMac Pro :: USB Or Peripherals - Screen Hub / Main Unit Intermittent Fault?
Apr 14, 2009This is something I've been wondering for a long time. I seem to have a lot of screen-related issues with the Pros that I sit in front of in the main. Brightness controls going haywire displays not turning on, etc. There is also the odd attached USB device lockup, but I'd been putting this down to the devices themselves and the occasional, app-level instability of Leopard. More recently though, I've been seeing a pattern that's leading me to suspect the Pro's more than the peripherals. Is there a documented case of possible USB hub connection issues in (fully patched) 2008 Pros? The most frequent issue is monitors not behaving as expected when the system is booted until the monitors themselves are unplugged from power. There are also less frequent but present problems where iPods lock up, keyboards stop working, etc. I can't really abstract the problem down to an OS issue or a hardware issue, but the need for me to unplug the monitors seems to indicate that there is some sort of USB initialisation issue - as with the other minor problems I experience with other monitor-connected USB peripherals. Since I only use multimonitor environments as far as my Pros are concerned, all USB connections are usually made from the backs of the screens. So the big question is is this a screen USB hub fault, or a main-unit intermittent fault? All of the monitors I'm using have been to Applecare for one reason or another, although I'm not sure if they check everything in these repairs.
Can anyone else shed more light on this issue? It's pretty hard to replicate reliably and it's not been something I can go to Apple with any degree of certainty, yet the little minihoops I have with this problem (and oh so many other Apple issues, but that's by the by) irritate me immensely in comparison to my rock-solid, near-zero-such-issue, non-Apple environments which I also use daily.
Hardware :: Making USB Peripherals (like ScanSnap Scanner) Wireless
Sep 20, 2009can you do this with an airport extreme or time capsule? I assumed that by connecting the USB line of my ScanSnap scanner to these devices, I would be making them wireless (i.e., so I wouldn't have to plug the USB into my actual computer). It doesn't seem to work for some reason. Is it b/c that's not possible, or am I doing something wrong?
View 3 Replies View RelatedPowerPC :: Won't Unlock Firewire Driver / After Installation
Aug 27, 2010I've had to perform a complete clean re installation on my main HD to get my G5 Cypher dual core 2.63 running again with leopard. Somehow when I screwed the main HD it locked me out of my other internal HD and every Firewire drive connected to the computer. Those drives will not show up on the desktop. Is there a back door way for me to unlock them. In Tech Tool Pro, they show up as locked. I tried repairing the permissions with TTP, but it failed. My gut is telling me I might have to buy some data recovery software to get my files off those drives and then reformat them.
View 1 Replies View RelatedPowerPC :: G4 Cube Not Booting From Installation Disks
Oct 9, 2010I recently acquired a G4 cube with no os. It came with the original disks, but the only problem is instead of booting from them a flashing question mark on a floppy drive is shown. I have tried resetting the PRAM and NVRAM which hasn't worked.
View 9 Replies View RelatedPowerPC :: Ibook 1.33 Airport Card Installation?
Jul 23, 2006I need to reseat my Airport Extreme card and I don't know where it is or how to do it on this "mid-2005" model. Please point me to the appropriate URL that has diagrams. For some reason, the "mid 2005" g4 iBooks have a different Airport card removal and replacement procedure than the earlier models. Because, I suppose, airport cards were standard, i.e., not optional, with this model, the install process is not included in the manual. But you'd think that all I'd have to do is search the Apple site for "g4 ibook 1.33 airport card" or similar keywords and the instructions for removal and installation would be returned. Ha! and Double-Ha! Here are the official results of the above keywords:
View 8 Replies View RelatedPowerPC :: Stuck On Tiger Installation For Ibook?
Jul 4, 2009I recently have recieved an ibook with osx 10.3.9 that doesnt have any wireless internet. Since i have a wireless adapter, i decided to install it on so i can use this computer for internet. Since the driver for the installer is only for newer osx versions i decided to upgrade my os. I knew that my cd-rw/dvd-rom drive isnt working so i booted disk1 of the cd-installation from my old ipod. Now it wants disk 2 and when i put in my ipod with the second disk it wont continue installation.
View 2 Replies View RelatedPowerPC :: EMac Freezes After Hard Drive Installation?
Feb 11, 2006I recently installed a new 250 GB hard drive in my 800MHZ emac. I did a nice clean install of 10.4 on it and all was going well. The problem is that it randomly freezes after about 10 or 20 minutes. Mouse locks up, keyboard doesn't work.I tried pinging it from another computer and there was no response. I hold the power button in to shut it down and when it reboots it works fine for a while and then freezes again. I checked the console and it had this:
Mac OS X Version 10.4 (Build 8A428) 2006-02-10 20:36:25 -0500 2006-02-10 20:36:26.072 loginwindow[84] FSResolveAliasWithMountFlags returned err = -1407
I ran the disk utilty checks and they come up clean. I have tried reinstalling os x with no luck.
PowerPC :: EMac Airport Extreme Card Installation?
Mar 30, 2009I bought an eMac off Craigslist. I really really love it. Its the 1GHz model, it does everything I want it to.
I needed it to have wireless for when I bring it home over the summer (Im at school now and we have ethernet cables) so I bought an airport extreme off ebay for about $20.
I followed the instructions (Held the door down, turned it off, installed it and plugged the antenna in) and turned it back on. No Airport symbol appeared at the top.
I searched a little bit, its running 10.3.9 and so i found it requires a driver (it didnt come with a CD).
I installed the Driver, restarted it and still nothing. I even made sure it was installed properly, and as far as I can tell everything is hooked in ok.
The guy who sold it to me is supposedly sending me an install of Tiger, would that help it recognize it? Im not really placing all my eggs in one basket either that he'll send it to me, any suggestions?
PowerPC :: Using OS X Installation DVD In Order To Install Tiger To IBook?
Sep 3, 2009A friend of mine got an iBook G4 14" with a 60GB HD that wasn't working, so he exchanged the HD, but now he is not able to get the iBook up and running because he doesn't have the installation DVDs for Tiger or any other OSX
My question is, could I use my OSX installation DVD (Tiger) in order to install Tiger to his iBook and get it up and running? I have my original installation DVDs and everything that came with my iBook, but I don't know if those will only work with my computer, or if they're limited to be installed in one computer at a time.
Hardware :: Hardware Peripherals For Photoshop Software?
Jan 25, 2011I downloaded a photoshop tutorial video and the guy was using what looked like a drawing tablet and a stylus to make selections and even to apply effects and so on. Though he was using a mac system I'm sure i could still get those that work on the pc. Pls could anyone direct me to a site where i can get them
View 2 Replies View RelatedWindows On Mac :: Triple Boot Installation - Stuck At Windows Installation
Sep 19, 2010I am trying to follow the following guide to do a triple boot, but I am stuck in Windows 7 installation
triple boot snow leopard, windows 7, & ubuntu
I have done the following:
1. Did a clean installation of OS X Snow Leopard on hard drive (Not yet partitioned the hard drive)
2. Installed rEFIt
I am not sure what the poster means by making sure it works by pressing the option button. I am assuming it means that I will be able to see the options I can choose when I press option? (I do see options to pick either "Hard Drive" or whatever disc in the DVD)
3. Partitioned 30 GB (or was it 40 GB? x.x I forgot sorry) space in Boot Camp Assistant for Windows installation. Chose the option to install Windows later.
4. Inserted OS X Snow Leopard installation disc and boot from there.
5. Opened up the Disk Utility and partitioned a hard drive (called Hard Drive_2) via the Partition section as instructed by the guide. Formatted in MAc OS Extended (Journaled)
So now, in that area I see "Hard Drive", "Hard Drive_2" and "BOOT CAMP" (so I am assuming that is what the poster meant by "3 partitions".
6. Restarted the computer with Windows installation disc.
Problems occur right here:
Problem 1: I do not see anything called "C something" as the poster said. But I do see something called "Boot Camp"
Problem 2: All the partitions that are available says that "Windows 7 can't be installed". So my question is am I supposed to "delete" a specific partition to install it?
I have pictures of the screen which I will upload later if this isn't clear enough.
OS X :: Snow Leopard Installation / Unable To Do Clean Snow Leopard Installation
Oct 19, 2009Question: I already have snow leopard installed on my iMac. But can I still do a CLEAN snow leopard installation onto my imac even though snow leopard is already installed?
I tried it just now like twice but I got the spinning wheel of death. It wouldn't go pass the apple sign and spinning wheel.
Mac Pro :: Optimal Ram Installation - Best Way?
Nov 19, 2008i search this topic but found a bunch of conflicting threads I have 4 x 2gb and 2 x 1 gb Whats the best way to install this? Top riser: 2GB , 2GB Bottom riser: 2GB, 2GB, 1GB, 1GB? TopRiser: 2GB, 2GB, 1GB Bottom: 2GB, 2GB , 1GB
View 6 Replies View RelatedOS X :: Mac 10.5.6 Pre Installation Hangs
Jan 19, 2009I am experiencing problems with the installation process for the Mac OS X 10.5.6 update. Although Software Update presents the appropriate update file, I am experiencing hangs resulting in the update never completing.
View 2 Replies View RelatedOS X :: Mac Crashed During OS X Installation / What To Do?
Apr 19, 2009I used a retail OS X 10.5 DVD to "erase and install" OS X on my PPC G4. It had been running OS X 10.5 without problems before but I wanted to erase everything on it. (In fact, I believe I upgraded it 10.5 with the same DVD). However, the mac crashed about 80% of the way through the process. It displays an alternating sad mac and question mark when I boot it up. I am occasionally able to boot it up from the CD but there is always a kernel panic before I can click the install button. What should I do?
View 3 Replies View RelatedOS X :: SL Installation Locked Up?
Aug 28, 2009I was trying to install Snow Leopard on my MBA via a remote DVD drive on my PC. The installation took about an hour and I got to the screen that says "Install Successful". It said that the computer needed to be rebooted and I clicked the button at the bottom of the screen that said "Restart".
When I did that, I got the colored pinwheel and it's been sitting like that for the last 20 minutes.
This is my first Mac and I don't know much about them so it figures it would happen to me. What should I do?
Windows On Mac :: Can't Get To Installation?
Jul 19, 2010On my iMac I have been trying to install bootcamp so I can get some of my favorite games.
I have partitioned the hard drive, I put in the windows xp disc to install, but when it restarts to install windows, it cannot get past the grey screen.
I'm not sure what the problem is, and I have followed the bootcamp assistant in doing everything it asks.
After trying to install windows, the only way I can even get it to reboot using mac is to do command-p-r. Anyone have any idea as to what the problem could be?
MacBook Pro :: The New Comes Without Installation Cd?
May 28, 2012I just bought a MBP and it cames without any instalation cd or usb flash drive. This is normal?
how can I reinstall the operating system without a cd or usb flash drive?
Info:
MacBook Pro, Mac OS X (10.7.4), 2.5GHz i7 | 15" | 120SSD | 16Gb RAM
OS X :: Moving .app Files Around After Installation?
Sep 23, 2010I like to keep my Applications directory tidy, so I have my software in several sub directories. I haven't had any problem moving the .app files around until I installed Virtual Box. It installs under Applications without asking anything, and if I just plain move the .app file somewhere else, the program doesn't run.
So, coming from Linux, my first instinct when a sw doesn't work from it's GUI launchers is to try run it from command line to see any potential error messages, and sure enough:
Code: sakus@MBP13 /Applications/Utilities/VirtualBox.app/Contents/MacOS $ ./VirtualBox
VirtualBox: supR3HardenedVerifyDir: Failed to open "/Applications/VirtualBox.app/Contents/MacOS": No such file or directory (2)
So my question is - as I'm still not too familiar with these .app bundles - based on that error message, which file should I look for to try and edit the hard coded directory paths ?
Mac Pro :: How Do You Manage Your Bootcamp Installation?
Oct 13, 2010Yesterday I created a bootcamp partition and installed Windows 7 64bit (only for gaming).
After the installation Win7 had already identified all the hardware, except the Bluetooth adapter (but i seen the drivers in the Windows Update) and the video driver (same as the bluetooth).
Then I put in my OSX DVD and installed "bootcamp software". It installed various drivers (chipset, video, bt etc.).
Now my question is: are this the correct method or maybe is better install only the missing drivers, after a clean OS install?
Because now I can't uninstall ATI drivers (the are 10.7 rev.), I have not the CCC (for adjusting some setting, i.e. forcing v-sysnc) etc.
OS X :: How To Kick Mac OS Into After-Installation Mode
Oct 23, 2010I remember I once read that there is a file you have to create somewhere with some special name that tells Mac OS if it is the first startup after an installation or not.Depending on that it will bring up the welcome wizard or it won't. Does anyone know what file that is? I have been trying to Google it for a while now but somehow Google hates me...
I need it because I wanna reinstall Mac OS, then update with the latest Combo Update, and then kick it back into that Wizard mode so I can sell it fully updated but still asking for the initial set up info...
