PowerPC :: Quad Processor Using GeForce 6600?
Oct 8, 2008
I am using a G5 Quad processor with a GeForce 6600 graphics card. I am working on a project in Second Life [URL] and have been advised that I need to update the driver on my graphics card to solve some problems encountered in Second Life. There does not seem to be an update for this card for Macs. I have asked Apple for help, but they have told me my serial number does not exist even though it is registered and I have had technical help from them in the past. Second Life say they do not support this graphics card!
View 1 Replies
ADVERTISEMENT
Aug 28, 2009
does the GeForce 6600 LE support dual monitors?
View 13 Replies
View Related
Nov 4, 2010
Will I see an improvement in the finder and for daily use (I don't play games) if I replace the Geforce GT120 by the new ATI Radeon 5770 or 5870? I do video editing with iMovie and I often use Photoshop.
View 1 Replies
View Related
Nov 26, 2010
With the Introduction of Civilization V for the Mac and its huge need for power. Now i'm not gonna attempt to try to play this game. But I downloaded Ship Simulator Extreme on my windows partition. Now on Steam it has the system requirements.
OS: Windows XP (Min. service pack 2), Windows Vista or Windows 7. 32 and 64 bits OS supported
Processor: 3 Ghz P4 Intel or AMD equivalent processor
Memory: 2GB (Windows XP) or 3GB (Vista or Windows 7)
Hard Disk Space: 3.5 GB
Video Card: Geforce 8800GT or ATI Radeon 4850 with 256MB ram (At least Shader model 3.0)
Sound: DirectX compatible
DirectX�: 9.0c
I have a MacBook Aluminium, Intel Core 2 Due 2.0GHz with 2GB Ram and NVIDIA 9400M. The game plays incredibly slowly and keeps jumping, like the refresh rate is so slow. I have downloaded the latest driver from NVIDIA but still it plays slow. Is my problem here the lack of RAM and I have a dual core processor which is above the requirements? I thought the good video card and processor would be enough? A lot of games seem to have minimum requirements much more than my mac, its not ever that old and seems outdated already.
View 6 Replies
View Related
Dec 31, 2008
You can currently get mac pro's in quad or octo core. The quad core models have one processor. Is it possible to buy a quad core today, and say 6 months from now, (if you can find the parts) add the 2nd processor? Is there a good place to find parts like that?
View 8 Replies
View Related
Feb 23, 2012
What type of processor does the Power MAC G5 Quad have?
Info:
PowerMac, Mac OS X (10.5.8), Number of CPU's-4 / Bus Speed-1.25G
View 14 Replies
View Related
Sep 27, 2009
I'm trying to find the processor in the quad core Nehalem, it says it's a Intel Xeon 3500 series processor
But which of these is it?
View 8 Replies
View Related
Apr 25, 2012
Is the new chip categorized as an i7 quad core processor?
Is there any danger to my 3 yo MBP core 2 duo(5,1) in upgrading from Leopard(10.6.8) to Lion?
View 7 Replies
View Related
Dec 29, 2009
I wanted to do some research on this processor, do you guys know what is the processor model code for the iMac's processor?
Is it a mobile processor or a desktop processor?
What is the difference between this one and this one?
View 2 Replies
View Related
Mar 16, 2008
I am wondering if it's possible to use a GeForce 6600GT 256mb AGP card in this machine?
I have this card from another machine that a friend gave me. It was out of a PC, but is a perfectly good card, and would be an upgrade to the 64mb GeForce FX5200 card that's currently in the G5 we have.
View 4 Replies
View Related
May 19, 2012
My Power Mac Dual G5 will not recognize my GeForce 6600 LR2A22 Video Card. I have it plugged into the VGA plug. The computer sounds like it starts up fine (chimes, DVD drive runs, hard drive runs), but does not show video. I have tried a new Battery?I have tried the PRAM tricke (did have two chimes)I have tried unplugging hard drive?Is this a video card issue (says its a brand new working card from ebay)Tried on multiple VGA monitors.
Info:
PowerMac
View 4 Replies
View Related
Jan 16, 2007
When upgrading my G5 I simply backed up the old drive to the neww 500 gig drive in bay 2 and then switched them. Could I just switch it to a Quad and the voila! it works? Could it be that simple or will I need to reinstall all the software?
What about installing the drive into a Macpro? Could I just place it in a bay and then run all my programs, like Photoshop, Imageprint, and Office?
View 3 Replies
View Related
Apr 17, 2009
I just purchased a Quad G5, from the original owner. Original owner, stated, that the machine was in excellent condition, and had not had any problems, nor parts replaced under Apple Care Warranty. Twice today, I had programs crash. 1st crash involved Photoshop CS3 Ext. 2nd Crash, involved FireFox & Photo Mechanic, which then I received a message from within OS X, to restart my tower.
I am quite surprised about the crashes, and do not know what to do, nor expect. Before, I received the G5, the HDD was wiped, with a fresh install of 10.5.6...
I'm also having a Bus Power issue. Before the G5, I had an aluminum keyboard, plugged into my iMac C2D, and I had no problem with Bus power, driving either my Thumb Drive or HDD, but with the Keyboard, hooked to the G5, I'm getting insufficient power warnings
Also, my 23" ACD will not go to sleep. I've got the screen saver set to 3 mins, which does come up, and the time set to 10 mins, for the display to go to sleep. However, when it hits the 10 min threshold, the screen blinks off for a second, then reverts to the active desktop, and the cycle begins again.
Also, with the 23" ACD, I'm seeing, what appears to be a ghosting effect, when I have apps layered on top of each other. It has been occurring with various apps, such as having Photo Mechanic on bottom, then Firefox on top, then Photoshop on top of it.
View 2 Replies
View Related
Jul 22, 2010
Well I'm kinda basically overhauling my G5 LCS so I figured, why not lets try and put a heatsink from my 1.8ghz G5 onto the quad G5 CPU since I have it out. I only have one CPU in it right now and it's actually doing pretty damn good. I set the Energy prefs to Reduced as a precaution.
If I ditch the LCS and make this a permanent setup, I will have to machine some custom brackets to hold the heatsinks to the logicboard/case. I have the G5 laid on it's side at the moment since there is no way to fasten the 1.8ghz heatsink down.
Below is a screenshot of the temps
This is with a constant 50% load on the CPUs as I just have it folding right now.
View 19 Replies
View Related
Nov 23, 2010
Well I was swapping some processors around on my G5 when I noticed that I was getting some weird graphical glitches. They went away when I disabled the 3-4 CPUs and made it a dual-core. The glitches are replicable when sizing windows and consistent when different window sizes. I'm starting to wonder if one of my CPUs are faulty...? Everything seems to be running fine otherwise. I attached a pic of the graphic anomaly I'm getting with all 4 core active and it only appears around text and it's always red color.
On a side note I also noticed that 2 of my dimm slots are reporting errors, the two outer banks. I've removed them and it's fine. Gonna load up the diagnostic discs to see if it finds anything.
View 4 Replies
View Related
Nov 29, 2010
I have had this quad g5 (dualcore 2.5ghz X 2) laying around for about a year that I purchased for $100 without a hard drive, super drive or a power cord. I was told that it was non working in the manner that ONE of the dual core cpu's had gone bad. I will be receiving my power cord this week to make sure that it still powers on but what the problem is.
My question is: If only one of the cpu's are bad, what is the part number I will be looking at? I am not wanting to spend a fortune on this to fix it, but If I do get it working I would like to drop 8-16gb ram in it, and setup a raid with 2 raptors.
View 9 Replies
View Related
Jun 11, 2007
My PM G5 Quad is in need of a new logic board and processor. I am waiting until after WWDC to see if there will be an update to the Mac Pro line - as I will be buying a new one to replace my old one. What's useful to keep from my old G5? I feel like I'm parting out an old Camaro or something. I'm planning to at minimum keep the HD and just pop it into the new machine (hope I can do that). I'm fairly certain the RAM is not going to be compatible, but I'm wondering if there's anything else I can scavenge off the old machine.
View 5 Replies
View Related
Jun 3, 2010
So I got offered a Quad G5 for $450. It comes with Leopard and I have wanted one for a while.
What are the benefits and detriments of this system?
View 24 Replies
View Related
Sep 28, 2009
I am looking too use Photoshop CS4 and was wondering if it is worth the upgrade to NVIDIA GeForce 9400M + 9600M GT with 256MB or should I just stick with the NVIDIA GeForce 9400M.I am not able too spend any more than the 1999.00 price point so these are my only two options. I need the portability of a laptop otherwise I would go with the iMac. I am sorry if this has been asked before,
View 4 Replies
View Related
Jun 26, 2009
I have always been interested in getting a G5, ever since they came out. I might be able to nag a Quad G5 for very cheap, but I have a question. I know that an Intel Core 2 Duo is faster than a G5, but how is it faster than the Quad? What exactly makes the Intel faster than the G5? I am looking at the Apple specs of the Quad and to me, it looks like a really solid computer, especially for 2005.
2 Dual Core 2.5GHz PowerPC Processors
1MB Cache Per Core (4MB Total)
FSB 1.25GHz Per Proc
Up to 16GB DDR2 PC2-4200
So, what makes the G5 Quad, or even Dual Core/Dual Proc G5's so weak?
View 24 Replies
View Related
Jul 13, 2010
Is there anyway to fix this other than buying a new graphics card? I've searched but couldn't find a solution. The 7800GT in my G5 always spins at top speed and is so much louder than the whole system. I've had it disconnected for a while but I don't want it burning up . Thinking I just might wire it to the 5v side of the molex connector on the optical drive?
View 13 Replies
View Related
Nov 19, 2006
What is going on? For no apparent reason, this computer decided to start making random "booping" sounds this evening. There is no error, it's not the mail, it even does it when I have my external speakers turned off. Anyone else have this going on? This is the first time it has happened and it's been going on all evening.
View 8 Replies
View Related
Jan 23, 2007
I want to buy this item:
http://www.sweetwater.com/store/detail/G5Wireless/
The bluetooth/airport extreme card for my PCI-e Dualcore 2.0ghz G5. I'm happy to install it myself. However I am leaving to go back to the UK on jan 31st, and sweetwater don't actually stock the item, and it will take a while to get it to me unless they expedite it from Apple and charge an extra $42 or so, which is too much for me. Anyone know who might actually stock the item and be able to send it out quickly?
View 2 Replies
View Related
Sep 2, 2009
I need a new/best card for a G5 quad 2.5. I know it's old (4 years) but it's still used quite a bit - mainly for Photoshop work. The card needs to run 2 x 23" Cinema Displays. I'm not sure if it makes any difference but it has 16GB memory (twice as much as our new 2.93 Quad can take - there's something not quite right there...)
View 12 Replies
View Related
Nov 27, 2009
i want to take a motherbord from a quad core 2.5ghz powermac g5 and swich the procesers with 2 2.3ghz g5's add water cooling (trough the heat sinks or somthing) and have (in essance) a water cool quad core 2.3 ghz powermac g5
View 14 Replies
View Related
Sep 29, 2010
I know this has probably been asked before but I have no idea how to formulate search terms to not get a ton of junk results, so please bare with me on this.
I have a PowerBook G4 with a 1.67GHz processor and DVI output and a retarded graphics card. I want to buy a Pismo and hotrod it as mentioned by The Apple Blog. Basically, I'm asking if I can pull the processor out of the G4 and drop it in the Pismo.
Also, if there's any site I can look up sockets and whatnot for these guys, let me know. MacTracker doesn't mention that stuff as far as I know.
[URL]
View 3 Replies
View Related
Dec 6, 2010
This is an unfortunate development! It appears that one of my processors has died on me! Is this, in fact possible - and still be running? I have included a screen shot, using Temperature Monitor to show the processors and ambient temps. What other way could I determine if it truly dead? And lastly, can a replacement be had? (I'm fairly adept at computer repair) If so, where?
View 15 Replies
View Related
Feb 27, 2007
Tonight, I might have a chance to get a G5 processor from a friend, who wants to dissassemble his iMac G5 and sell it for parts (he's going to buy a 24" iMac C2D). Should I replace the G4 processor in my iBook G4 with a G5?.
I really want to do this and show off with this (if successful) in the public.
View 24 Replies
View Related
Apr 20, 2007
I can't seem to find specific information that would tell me if a 1.25 GHz processor from a MDD G4 would swap into a G4 Quicksilver (733 MHz) I have sitting in a corner.
They are both single processor machines, but I question the compatibility. I don't have the MDD machine with the 1.25 GHZ processor yet, so I can't look at them both for comparison.
View 5 Replies
View Related
Oct 2, 2008
I have found a cheap, broken Power Mac G5 for sale on the internet. It is a 2.5 GHz dual model. The owner says that one of the G5 processors is damaged.
Will the Power Mac work with only one processor? If I bought another processor will it have to be the same speed?
View 24 Replies
View Related
