I have found a cheap, broken Power Mac G5 for sale on the internet. It is a 2.5 GHz dual model. The owner says that one of the G5 processors is damaged.
Will the Power Mac work with only one processor? If I bought another processor will it have to be the same speed?
i have a blue and white g3. it has a slow 400mhz processor and 640mb ram. i would like to upgrade this machine to something i can use for daily tasks. websurfing, music, videos, etc.i was thinking motherboard and processor from a g4 or g5?
I have a power mac g4 (Power Mac G4 350Mhz (Yikes, PCI graphics) (M7826LL/A) And i want to upgrade its processor to a 1.0 ghz can someone tell me where to buy one.?
I just recently switched to Mac and was given a Power Mac G4 (CPU type PowerPC G4 - 2.9). I would like to upgrade and replace the processor. Is this a possibility or would it make more sense to buy a new computer?
ive got a macbook aluminum but my mums pc has crashed so since my switch over to apple i have been over impressed with the stability of mac computers.to cut a long story short i have had some great feedback from this site so wondering if you guys can help.ive seen a 17inch imac g5 1.8ghz ppc processor..and is it possible to run most streaming internet sites like youtube!! bbc iplayer. etc etc..and also can it run windows 7 so she can play some chinese games via flash...??
basically does flash support the power this imac produces..??
My sister has just broken off the central pin to her iBook G4 which is now wedged inside the connector. Obviously the ac adapter is screwed and needs replacing but short of pulling out the offending pin from the inside of the connector, would I have to replace the power supply? How complicated is this? Cost? Any guides etc?
I was attempting to replace the hard drive in my eMac, but for instructions I HAD to follow some darn take-apart guide that said pull out the connection for the power button cord from the logic board. I didn't know that it was SOLDERED in there, and now I can't complete putting my eMac back together without doing so.
Can this be fixed without having to send it to Apple? Does it HAVE to inolve soldering, or is there an alternative? Is there a way I can temporary have my eMac power on until I get the connector fixed?
I have a PowerPC G5, with OSX 10.5.8 (Leopard). Can I upgrade to 10.7 or do I need an Intel-based Mac? I'm already finding certain apps that are not compatible with OSX 10.5.
The 2011 macbook pro with i7 processor will not power up or charge at all. The problem started after my battery ran out and the computer shut down. Since then, when I plug in the charger only the green light turns on. In addition the light on the base (in front of the keyboard) flashes. Nothing happens when I hit the power button. The charger still works on other laptops. To emphasize, the screen will not even light up. It sounds as if the computer is starting (for less than a second) before stopping, only to start again but that is purely speculative.
I recently obtained a (free) Power Mac G4 (Dual 500Mhz, AGP, Gigabit Ethernet) I am looking to upgrade the processor and video. Can anyone advise on what video card would work on this machine? Do I have to go with a Mac edition AGP card (ATI Radeon X800 Pro Mac Edition) or can I use any (PC) AGP card, for example the Radeon HD 4000 or Geforce 7 series?
I am perfectly happy with my MBA, but I must admit that I like to always have the "latest and greatest". The new MacBooks look great, although I haven't seen one "live" or had the opportunity to get hands on with one yet. If I buy a new MacBook, I give up the form factor, but gain the processor power, features, etc. Also, it will really feel like a new computer because of the different appearance. Since I like the MBA form factor, I was thinking of just upgrading to that. The problem is that it won't even feel like I got a new laptop, because visually it would be identical to the one I have now. In fact, the reduced battery life may not offset the benefit of larger HD and improved graphics. Dying for a new laptop though... what are you other MBA owners thinking?
im looking for a was to run a few pc programs on my old power mac g5, is running os x 1.4 and IS NOT an intel mac, i cant seem to find an aplication that will allow me to do this, i will happily upgrade my os if need be,
Is it possible to update my Dual 2GHz PowerPC G5 to an Intel or other processor? Of course, I'm finding that my machine is not being supported by software developers anymore?I'm running 10.5.8 on my Power Mac (June 2004).
I have a Power Mac G5 2.0 GHZ 1 TB and 250GB Hard Drive, 4 GB of Ram Running 10.5.8 Leopard. Now i bougth this mac on ebay to EDIT VIDEOS AND PICTURES. BUT, i cant do either because all the editing software requires snow leopard or higher. the Mac doesnt even have I Movie, Garage Band. To get any sort of editing software i need snow leopard. To get snow leopard i have to have an Intel Based Processor MINE ISN'T INTEL. So pretty much i have NO WAYS to edit or create videos.
Info: PowerMac, Mac OS X (10.5.8), 2.0 GHZ, 1.2 TB.
I've been looking around for an additional gigabit ethernet card for my single 1.8 G5 processor. I've read many of the postings but they relate to the 1.8 dual processor with pci-x. I only have pci slots (4 ram slot model - late 2004 revision) and am stumped.
The DGE-528T looked like it may work, then I read it hasnt been confirmed as working for the G5 sinle processor as of yet.
The next card that may work is the Intel PRO/1000MT.
Information: Single processor G5 Mac OS X (10.3.9)
I've got a G5 DP with the infamous white noise problem coming through my speakers that was only fixed after downloading the chud tools and disabling the NAP settings - does anyone know if I'll have the same issues if I install Leopard? Want to upgrade but don't want to waste my money if the noise comes back and I can't get it to work. Also, I'm using an m-audio firewire 410 that doesn't have drivers yet; has anyone used the Tiger drivers with success on Leopard?
Long time lurker, first time I couldn't find a fix without asking so here it goes... I'll try not to leave anything out... Btw way the screen is broke but i use it with an lcd tv. Was working in final cut this morning when suddenly the app froze. No big deal I'll just force quit and restart... Hit enter on the force quit dialogue and the app disappears. Cool.BUT, its hanging in purgatory in the dock, thinking its still "active" or whatever with the little highlight, but clearly states that is "not responding" when right-clicked. Command-opt-esc doesnt show final cut in the applications list when pressed again... AND, Illustrator and photoshop are also now not responding, and begin acting the same way in the dock. Weird right? Ok whatever so I'll just shut down and fire her back up, I think. Apple menu/shutdown shows the yes/no dialogue to shutdown but when i hit okay it does not shutdown. the top apple menu bar disappears as does all files/folders/images on the desktop, but the desktop background remains. i figured it was just taking a sec longer than usual so i walked out of the room, but when i came back it was the same. after REALLY trying to NOT press the power button to shut it off, I finally broke down and did. Now the tv isnt getting the signal from the mac on restart. After much searching (probably here) I found that if I power up the mac and then immediately close the lid it forces the connected display into primary. Again, cool. BUT, I get the blinking question mark folder. I somehow managed to pull the above trick and hit the option key which brought me to what I thought would be an empty startup disk screen. Alas, Macintosh HD is right there. But, when I choose that drive, which is the only thing showing, it goes back to a blank grey screen and never boots. Any ideas? I can get all my data via target disk on my imac, and it appears the drive is functioning fine when i use disk utility when viewing as a firewire drive on the imac.
I know this has probably been asked before but I have no idea how to formulate search terms to not get a ton of junk results, so please bare with me on this.
I have a PowerBook G4 with a 1.67GHz processor and DVI output and a retarded graphics card. I want to buy a Pismo and hotrod it as mentioned by The Apple Blog. Basically, I'm asking if I can pull the processor out of the G4 and drop it in the Pismo.
Also, if there's any site I can look up sockets and whatnot for these guys, let me know. MacTracker doesn't mention that stuff as far as I know.
This is an unfortunate development! It appears that one of my processors has died on me! Is this, in fact possible - and still be running? I have included a screen shot, using Temperature Monitor to show the processors and ambient temps. What other way could I determine if it truly dead? And lastly, can a replacement be had? (I'm fairly adept at computer repair) If so, where?
Tonight, I might have a chance to get a G5 processor from a friend, who wants to dissassemble his iMac G5 and sell it for parts (he's going to buy a 24" iMac C2D). Should I replace the G4 processor in my iBook G4 with a G5?.
I really want to do this and show off with this (if successful) in the public.
I can't seem to find specific information that would tell me if a 1.25 GHz processor from a MDD G4 would swap into a G4 Quicksilver (733 MHz) I have sitting in a corner.
They are both single processor machines, but I question the compatibility. I don't have the MDD machine with the 1.25 GHZ processor yet, so I can't look at them both for comparison.
Just got a free Powerbook G4 15" 1.5Ghz 768MB RAM. I installed Panther 10.3.9 and have notices it's rather primitive. Specs say I can install up to 10.5.8 OS. So my questions are:
1. What is the optimal OS for my G4 and how can I get it (whether it be by purchase or DL)? 2. Should I upgrade the ram and/or processor?