When upgrading my G5 I simply backed up the old drive to the neww 500 gig drive in bay 2 and then switched them. Could I just switch it to a Quad and the voila! it works? Could it be that simple or will I need to reinstall all the software?
What about installing the drive into a Macpro? Could I just place it in a bay and then run all my programs, like Photoshop, Imageprint, and Office?
I just purchased a Quad G5, from the original owner. Original owner, stated, that the machine was in excellent condition, and had not had any problems, nor parts replaced under Apple Care Warranty. Twice today, I had programs crash. 1st crash involved Photoshop CS3 Ext. 2nd Crash, involved FireFox & Photo Mechanic, which then I received a message from within OS X, to restart my tower.
I am quite surprised about the crashes, and do not know what to do, nor expect. Before, I received the G5, the HDD was wiped, with a fresh install of 10.5.6...
I'm also having a Bus Power issue. Before the G5, I had an aluminum keyboard, plugged into my iMac C2D, and I had no problem with Bus power, driving either my Thumb Drive or HDD, but with the Keyboard, hooked to the G5, I'm getting insufficient power warnings
Also, my 23" ACD will not go to sleep. I've got the screen saver set to 3 mins, which does come up, and the time set to 10 mins, for the display to go to sleep. However, when it hits the 10 min threshold, the screen blinks off for a second, then reverts to the active desktop, and the cycle begins again.
Also, with the 23" ACD, I'm seeing, what appears to be a ghosting effect, when I have apps layered on top of each other. It has been occurring with various apps, such as having Photo Mechanic on bottom, then Firefox on top, then Photoshop on top of it.
Well I'm kinda basically overhauling my G5 LCS so I figured, why not lets try and put a heatsink from my 1.8ghz G5 onto the quad G5 CPU since I have it out. I only have one CPU in it right now and it's actually doing pretty damn good. I set the Energy prefs to Reduced as a precaution.
If I ditch the LCS and make this a permanent setup, I will have to machine some custom brackets to hold the heatsinks to the logicboard/case. I have the G5 laid on it's side at the moment since there is no way to fasten the 1.8ghz heatsink down.
Below is a screenshot of the temps
This is with a constant 50% load on the CPUs as I just have it folding right now.
Well I was swapping some processors around on my G5 when I noticed that I was getting some weird graphical glitches. They went away when I disabled the 3-4 CPUs and made it a dual-core. The glitches are replicable when sizing windows and consistent when different window sizes. I'm starting to wonder if one of my CPUs are faulty...? Everything seems to be running fine otherwise. I attached a pic of the graphic anomaly I'm getting with all 4 core active and it only appears around text and it's always red color.
On a side note I also noticed that 2 of my dimm slots are reporting errors, the two outer banks. I've removed them and it's fine. Gonna load up the diagnostic discs to see if it finds anything.
I have had this quad g5 (dualcore 2.5ghz X 2) laying around for about a year that I purchased for $100 without a hard drive, super drive or a power cord. I was told that it was non working in the manner that ONE of the dual core cpu's had gone bad. I will be receiving my power cord this week to make sure that it still powers on but what the problem is.
My question is: If only one of the cpu's are bad, what is the part number I will be looking at? I am not wanting to spend a fortune on this to fix it, but If I do get it working I would like to drop 8-16gb ram in it, and setup a raid with 2 raptors.
My PM G5 Quad is in need of a new logic board and processor. I am waiting until after WWDC to see if there will be an update to the Mac Pro line - as I will be buying a new one to replace my old one. What's useful to keep from my old G5? I feel like I'm parting out an old Camaro or something. I'm planning to at minimum keep the HD and just pop it into the new machine (hope I can do that). I'm fairly certain the RAM is not going to be compatible, but I'm wondering if there's anything else I can scavenge off the old machine.
View 5 Replies View RelatedSo I got offered a Quad G5 for $450. It comes with Leopard and I have wanted one for a while.
What are the benefits and detriments of this system?
I am using a G5 Quad processor with a GeForce 6600 graphics card. I am working on a project in Second Life [URL] and have been advised that I need to update the driver on my graphics card to solve some problems encountered in Second Life. There does not seem to be an update for this card for Macs. I have asked Apple for help, but they have told me my serial number does not exist even though it is registered and I have had technical help from them in the past. Second Life say they do not support this graphics card!
View 1 Replies View RelatedI have always been interested in getting a G5, ever since they came out. I might be able to nag a Quad G5 for very cheap, but I have a question. I know that an Intel Core 2 Duo is faster than a G5, but how is it faster than the Quad? What exactly makes the Intel faster than the G5? I am looking at the Apple specs of the Quad and to me, it looks like a really solid computer, especially for 2005.
2 Dual Core 2.5GHz PowerPC Processors
1MB Cache Per Core (4MB Total)
FSB 1.25GHz Per Proc
Up to 16GB DDR2 PC2-4200
So, what makes the G5 Quad, or even Dual Core/Dual Proc G5's so weak?
Is there anyway to fix this other than buying a new graphics card? I've searched but couldn't find a solution. The 7800GT in my G5 always spins at top speed and is so much louder than the whole system. I've had it disconnected for a while but I don't want it burning up . Thinking I just might wire it to the 5v side of the molex connector on the optical drive?
View 13 Replies View RelatedWhat is going on? For no apparent reason, this computer decided to start making random "booping" sounds this evening. There is no error, it's not the mail, it even does it when I have my external speakers turned off. Anyone else have this going on? This is the first time it has happened and it's been going on all evening.
View 8 Replies View RelatedI want to buy this item:
http://www.sweetwater.com/store/detail/G5Wireless/
The bluetooth/airport extreme card for my PCI-e Dualcore 2.0ghz G5. I'm happy to install it myself. However I am leaving to go back to the UK on jan 31st, and sweetwater don't actually stock the item, and it will take a while to get it to me unless they expedite it from Apple and charge an extra $42 or so, which is too much for me. Anyone know who might actually stock the item and be able to send it out quickly?
I need a new/best card for a G5 quad 2.5. I know it's old (4 years) but it's still used quite a bit - mainly for Photoshop work. The card needs to run 2 x 23" Cinema Displays. I'm not sure if it makes any difference but it has 16GB memory (twice as much as our new 2.93 Quad can take - there's something not quite right there...)
View 12 Replies View Relatedi want to take a motherbord from a quad core 2.5ghz powermac g5 and swich the procesers with 2 2.3ghz g5's add water cooling (trough the heat sinks or somthing) and have (in essance) a water cool quad core 2.3 ghz powermac g5
View 14 Replies View RelatedI've been having problems with the optical drive on my G5 Quad for the last few months. It makes a clanking noise every few minutes, similar to the sound it makes when you put in a cd. Also, every now and then when I put in a cd it just doesn't read it, and it makes itunes crash. The drive is an LG HL-DT-ST DVD-RW GWA-4165B. I have read lots of bad things about this drive on the internet, and it also happens to be much slower at importing dvds than the pioneer drives that are (or were) also shipping with some G5s.
I finally went down to my apple store, in The Netherlands. I explained the problem to the tech guy, and he said they would replace it under warranty. However, when I asked if it was possible to get a pioneer drive, he said they had no control over which brand they receive on replacement parts, but that almost always they get pioneers. Well, I took it in and they replaced the drive. They refused to do a test on it though, arguing that they were fixing another G5 and wouldn't be able to hear the noises I was complaining about (there was also a strange noise coming form one of the fans). The guy suggested that I brought it back some other time, and said he was absolutely sure he wouldn't find anything (turns out these guys also happen to be clairvoyants, or so they seem to think!) Coming from America I find it really hard to believe how rude and stupid the apple people can be at this store in The Hague, but unfortunately I can't avoid having to deal with them while I live here (there are endless horror stories about this particular shop). I don't have a car, so I had to take a cab there and back, which ran to about � 20, plus all the trouble and the wasted time. But sure, why not just bring it again some other time like the guy said?............
My newly fixed Powermac Quad has fans blasting when it goes to sleep. Is this a hardware or software issue?
View 2 Replies View Relatedive searched around a lot and only found topics talking about the AGP PM (which the x800xt sounds like its the best card) but iam looking for the best card for the Quad 2.5 DC DP.
Ive got an older NV silencer also hanging around from an old gpu fan swap, so thats available for the upgrade aswell.
I noticed that this hasnt been asked on any thread as everyone is too busy debating on 3.2GHz vs. the 3.3GHz 6 core models.
View 4 Replies View Relatedis it even possible to upgrade an old dual core powermac g5 to a quad core or even an 8 core.
I have a dual core one and i really need to upgrade to a quad or even 8 but it is so expensive to buy a whole brand new one and i was wondering if there was a way to just get a new processor and more ram or what not.
Just wondering what everyone's thoughts are on moving from an iMac G5 (2GHz) to an Intel Mac Mini (a Duo or Core 2 Duo, not the Solo) for Final Cut Studio editing? I don't do a ton of editing (it's a hobby), but I wouldn't want too much less than what I'm getting from my G5 right now.
View 5 Replies View Relatedi have a power mac g-5 quad with an external dvd drive and a external hard drive and 2gb of ram. on my ext. hard drive i downloaded mac the ripper and that is where i put all my dvds, now today on my pmac i was using mac the ripper, popcorn, itunes, safari all at once and it froze up on me?why? could the ram be an issue? how may programs can i use at once with my pmac?
View 3 Replies View RelatedIf i purchase an MacPro system with single quad-core processor, can a second quad-core be added after the fact? If not, why?
View 11 Replies View RelatedJust want to see which one are you ordering / would like to order and why? Yes it will be a much easier decision to make once both benchmarks are out for both CPUs to determine which offers the best bang for the buck, but we dont have that luxury at the moment, so lets work with what we've got.
View 24 Replies View RelatedWirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_0_2 like Mac OS X; en-us) AppleWebKit/532.9 (KHTML, like Gecko) Version/4.0.5 Mobile/8A400 Safari/6531.22.7)
This is the 06 MP. It has the 667 mhz ram . Can it handle the ati radeon 5870 1 ghz video card? I can get this MP for $899 on z boxing day sale. I would get it if I know I can upgrade the card
Well I am a little frustrated and looking for someone that can maybe find a solution with my problem. My mac pro system crashes constantly at least once a day if not more and it always seems to happen when I am doing something important. I have noticed that it usually crashes when I am on Safari... I have attached the report.
Sat Dec 27 17:35:08 2008
panic(cpu 0 caller 0x001A9C68): Kernel trap at 0x00af7127, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x00fa9000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x00000036, ECX: 0x04086ed4, EDX: 0x000182b8
CR2: 0x00000000, EBP: 0x00108b18, ESI: 0x048c3660, EDI: 0x00108ff0
EFL: 0x00010006, EIP: 0x00af7127, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000000..............................
i want the fastest MAC for processing and editing photos for my PHotography business. I use PS and Lightroom at the same time and i need to be able to switch between them quickly and of course go through my photos quickly. So what i think i need is lots of ram and processing power. But my question is do i need extra processors and cores?
according to [URL] it looks like the 2.93 quad has a better overall performance rating but the 2.26 has a better multicore speedup (whatever that is).
I'll be driving two monitors. One needs dual-link for the 1600x12000 resolution and the other is a 720p television with HDMI connectors.
I know the Mini-Displayport to DVI adapter will be needed along with a DVI to HDMI cable/adapter. Don't need sound (that goes via toslink to my sound system).
I know there had been some discussions here about the new i7 quad, and before I spend my hard earned cash I wanted some last minute opinions.
I post this here in the Mac Pro forums because I figure there might likely be more FCP users...which is what my main use for my new machine will be.
I have been wanting a new unit for several months now, and have been just waiting to pull the trigger on a Mac Pro. In fact, it has gotten to be a running joke around my house with my wife and I...we can be talking about something totally non-related and I will say "I just have one word for you...OCTO!!!" Anyway, I digress.
While I simply cannot justify (or afford really) a maxed out octo, I have been considering a "fairly" maxed out quad MP. But now that the new iMac has appeared, I am having more trouble.
I am not a pro...meaning I am not paying my bills with FCP. I would characterize myself as prosumer...which describing myself really means consumer who likes nicer equipment. I do want a "respectable" machine that will handle FCP with somewhat ease.
My current video set up is an HMC150 mixed with Canon 7D. Converting to ProRes 422 (not the HQ flavor) and using things like Magic Bullet. Not doing much Motion work...mostly because I have not learned that process yet. I am currently doing it on a maxed out 2008 iMac. And so far it has not been all that bad. Ingesting is not taking long enough to bother me really...and editing is nice and smooth. The only really long times are for rendering and encoding to H.264.
So, given these facts, am I way out in left field here considering a maxed out iMac? I am sure that during the process, the render and encode times will be what taxes the machine the most. And I am not even really sure that those times would be much different on a quad MP. Octo, sure. But even then I am not sure what kind of differences we are talking about. I mean would a similarly configured octo have double performance from the quad? Would a 2 hour render or encode on an octo take 4 hours on a quad?
The other thing I am thinking is this...Even if the iMac turns out to be way less than what I would like, I am thinking I can use it for awhile (as long as I can stand it) then maybe down the road look again at the MP...say after the 6 or 12 core thing plays out. I could always use the iMac as the monitor for a MP down the road. The glossy thing is not a factor for me...it doesn't bother me at all.
In theory, will windows on virtualbox be running best on a quad or duo iMac? Right now I am doing it on a 2008 MacBook and I must say it does put a strain on the computer to the point of being annoying. I ask since in process of upgrading to iMac.
View 3 Replies View RelatedWhy not offer a 21 quad? Heat? Or Apple just being Apple?
View 19 Replies View Related