Just got a free Powerbook G4 15" 1.5Ghz 768MB RAM. I installed Panther 10.3.9 and have notices it's rather primitive. Specs say I can install up to 10.5.8 OS. So my questions are:
1. What is the optimal OS for my G4 and how can I get it (whether it be by purchase or DL)?
2. Should I upgrade the ram and/or processor?
if it was possible to swap out the first intel processors with the newer ones the imacs are coming with. i found this info and mainly looks just as tricky as open heart surgery to risk my imac doing, and thats just replacing the processor itself.
View 10 Replies View RelatedI recently obtained a (free) Power Mac G4 (Dual 500Mhz, AGP, Gigabit Ethernet) I am looking to upgrade the processor and video. Can anyone advise on what video card would work on this machine? Do I have to go with a Mac edition AGP card (ATI Radeon X800 Pro Mac Edition) or can I use any (PC) AGP card, for example the Radeon HD 4000 or Geforce 7 series?
View 1 Replies View RelatedI've just installed an SSD in my new iMac 27", see here. I'm fast learning though (diglloydTools and other commentators) that once the application has loaded the SSD isn't involved very much from there on, so there are the same old performance problems. I'm finding in Firefox/Firebug where there is a large DOM (nothing exceptional) performance is still woeful.
So, baring in mind the Core i7 processor is under $200 and it would appear to have been possible to upgrade the iMac's processors in the past, does anybody have any advice for me? What parts will I need, have you done it and what was your experience, any common problems with doing this, are the parts themselves upgradeable (the quoted link only suggests they are) etc.
I'd like to start by saying excuse the stupid questions, I'm still very new with using macs. I'm a long time PC user, but I've recently made plans to replace my PC with an iMac. Specifically a 21.5" with an Intel i3 processor. This mac comes with 4gb ram, and a Radeon 5650 HD graphics card.
Now I'm a fairly big gamer, and I like my hardware to be as high-end and up-to-date as possible. If I were to plan on upgrading the graphics card, ram, and processor, could this be easily done at home?
I'm asking because of the unusual structure of the iMac. i.e. the lack of tower, and all the hardware being merged with the screen. I'm assuming it would be a lot easier on a mac pro because it actually has a tower that I can easily open/customize.
Lastly, granted that the above is possible, are the generic graphics cards, processor, and ram chips compatible with iMacs? Or would I need to buy a special iMac compatible version from an Apple specialist shop?
I have a Power Mac G5 2.0 GHZ 1 TB and 250GB Hard Drive, 4 GB of Ram Running 10.5.8 Leopard. Now i bougth this mac on ebay to EDIT VIDEOS AND PICTURES. BUT, i cant do either because all the editing software requires snow leopard or higher. the Mac doesnt even have I Movie, Garage Band. To get any sort of editing software i need snow leopard. To get snow leopard i have to have an Intel Based Processor MINE ISN'T INTEL. So pretty much i have NO WAYS to edit or create videos.
Info:
PowerMac, Mac OS X (10.5.8), 2.0 GHZ, 1.2 TB.
I'm looking to get the a new iMac and will be using it for iTunes , photo's and hopefully will get into the iMovie for editing family movies etc.
Is it worth me upgrading to 4 gigs ram and 3.06 processor and Geforce graphics card? or will i not really notice a difference from the model below with 2 gigs ram and 2.86 processor?
Also in terms of ripping my family dvd's onto the imac can this be done?
Lastly is the iMac an Hi def screen?
I wanted to do some research on this processor, do you guys know what is the processor model code for the iMac's processor?
Is it a mobile processor or a desktop processor?
What is the difference between this one and this one?
I've been researching for a while on upgrading my white intel iMac from a "Core Duo" processor to a "Core 2 Duo" processor. The processor I would like to use is a Intel Core 2 Duo Mobile T5750 processor, which would give me 2 additional cores as well as a small speed bump from 1.83 ghz to 2.0 ghz. I figured compatibility should be fine considering the FSB speed (667 Mhz) is the same. Has anyone tried this? Can anyone tell me if this will work for sure?
View 24 Replies View RelatedI am a long-time Windows user and I'm making the jump to a Macbook Pro, a very expensive one, at that.I'm getting the highest end 15'' Macbook Pro and I'm adding a 7200rpm 500GB drive. One thing I am worried about is the Intel 2.8ghz processor.
I want to upgrade to 3.06ghz and would like to know the effect it would have on my battery life combined with the 7200rpm.
I know this has probably been asked before but I have no idea how to formulate search terms to not get a ton of junk results, so please bare with me on this.
I have a PowerBook G4 with a 1.67GHz processor and DVI output and a retarded graphics card. I want to buy a Pismo and hotrod it as mentioned by The Apple Blog. Basically, I'm asking if I can pull the processor out of the G4 and drop it in the Pismo.
Also, if there's any site I can look up sockets and whatnot for these guys, let me know. MacTracker doesn't mention that stuff as far as I know.
[URL]
This is an unfortunate development! It appears that one of my processors has died on me! Is this, in fact possible - and still be running? I have included a screen shot, using Temperature Monitor to show the processors and ambient temps. What other way could I determine if it truly dead? And lastly, can a replacement be had? (I'm fairly adept at computer repair) If so, where?
View 15 Replies View RelatedTonight, I might have a chance to get a G5 processor from a friend, who wants to dissassemble his iMac G5 and sell it for parts (he's going to buy a 24" iMac C2D). Should I replace the G4 processor in my iBook G4 with a G5?.
I really want to do this and show off with this (if successful) in the public.
I can't seem to find specific information that would tell me if a 1.25 GHz processor from a MDD G4 would swap into a G4 Quicksilver (733 MHz) I have sitting in a corner.
They are both single processor machines, but I question the compatibility. I don't have the MDD machine with the 1.25 GHZ processor yet, so I can't look at them both for comparison.
I have found a cheap, broken Power Mac G5 for sale on the internet. It is a 2.5 GHz dual model. The owner says that one of the G5 processors is damaged.
Will the Power Mac work with only one processor? If I bought another processor will it have to be the same speed?
i have a blue and white g3. it has a slow 400mhz processor and 640mb ram. i would like to upgrade this machine to something i can use for daily tasks. websurfing, music, videos, etc.i was thinking motherboard and processor from a g4 or g5?
View 8 Replies View RelatedI have a power mac g4 (Power Mac G4 350Mhz (Yikes, PCI graphics) (M7826LL/A) And i want to upgrade its processor to a 1.0 ghz can someone tell me where to buy one.?
View 17 Replies View RelatedI just recently switched to Mac and was given a Power Mac G4 (CPU type PowerPC G4 - 2.9). I would like to upgrade and replace the processor. Is this a possibility or would it make more sense to buy a new computer?
View 2 Replies View RelatedIs it straightforward to download neooffice for mac book pro?
Info:
MacBook Pro, Mac OS X (10.7.2)
in 2007 I purchased my first ever mac pro 1.1 intel.2 x 2.0 GHz Dual-core Xeon "Woodcrest1GB ram (2x512)GeForce 7300 GT
and right now I'm looking into upgrading processors. somewhere in the apple discussion I find out that I should look at:Intel Clovertown Xeon processors. E5345 (2.33 Ghz), E5355 (2.66 Ghz) or X5365(3.0 Ghz). I need a pair.Those are Quad core processors and are pin for pin compatible with the 2006 Mac Pro 1,1, they say. Bloody hell they are hard to find.
I am looking for a motherboard and possibly processor for a MDD g4 powermac. I need the 167mhz version, rev with dual firewire 400 ports. Also, possibly a dual 1.25ghz processor module. I have either a dead processor or motherboard in this machine and I am having trouble finding some used replacement parts.
View 3 Replies View Relateddid an iBook produced in 2004 come with 2.0 ghz processor? someone is trying to sell me one but said that the os X is password protected so I'll need to reinstall os x?
View 11 Replies View RelatedI have a couple of power mac g4s around the place and I recently swapped some of the processors around. I originally had a pair of g4 466 "digital audio" machines and a g4 400 "sawtooth". After moving them around I end up with with a 466 "digital audio" a 533 "sawtooth" and a 350 "digital audio". Does it have to do with the bus speed?
View 9 Replies View RelatedI am using a G5 Quad processor with a GeForce 6600 graphics card. I am working on a project in Second Life [URL] and have been advised that I need to update the driver on my graphics card to solve some problems encountered in Second Life. There does not seem to be an update for this card for Macs. I have asked Apple for help, but they have told me my serial number does not exist even though it is registered and I have had technical help from them in the past. Second Life say they do not support this graphics card!
View 1 Replies View RelatedWhat is the best graphics cad for a dual processor 2.5 ghz power mac g5
View 2 Replies View RelatedI keep seeing my poor iMac G3 Blueberry freezing for no reason, I have 512MB of ram, but I don't think I can max it, and if I did, the processor and hard drive and gonna die soon, It just freezes, and sometimes the screen will not wake when I move the mouse or touch the keyboard.
View 2 Replies View RelatedI just bought an iMac with a G4 processor from a friend... The only problem is that apparently some vital file was deleted and as a result, it will not start up. I have a Tiger recovery disc, but because I'm only being shown the gray apple screen and the loading circle, I can't actually use it. Any ideas?
View 4 Replies View Relatedive got a macbook aluminum but my mums pc has crashed so since my switch over to apple i have been over impressed with the stability of mac computers.to cut a long story short i have had some great feedback from this site so wondering if you guys can help.ive seen a 17inch imac g5 1.8ghz ppc processor..and is it possible to run most streaming internet sites like youtube!! bbc iplayer. etc etc..and also can it run windows 7 so she can play some chinese games via flash...??
basically does flash support the power this imac produces..??
I have a G3 Beige Minitower (233MHz model) that I recently upgraded with a A/V Personality card I got from a friend of mine. It booted with the new personality card just fine. Now I got a hold of a G3 450MHz ZIF processor card and I put it into my G3, swapping out the old 233MHz one. I also took off the red jumper block and put some jumpers in place for a 450MHz processor. (Thanks to MacAddict Issue 30 for the pinouts, see "Overclocking your G3"). Now I got it booting, chiming and the power light going green, but no video coming out of the onboard video card (that came with the machine). I also have another Hard Drive, a Ultra-Wide SCSI card and a USB card, all 3rd party.
View 3 Replies View RelatedI have a PowerBook G4 15" Laptop and it's recently started making a buzzing noise. It drives me crazy! The noise seems to come from the processor and happens whenever I'm scrolling through web pages, hovering over my dock, launching applications or pretty much whenever the computer is doing anything.
I've googled the issue and found it to be quite common, even being some posts on this forum. Here's the best info I've found so far:
"The squeaking is actually the processor going into Nap mode, and has been noticed on a number of G4 and G5 models. To save power when the processor has a little bit of idle time, it essentially turns itself off. What is happening when it's squeaking like this is it is alternating very rapidly between going in and out of Napping as the processor waits for more things to do. I've noticed that it happens most often during an active SSL connection; an https:// connection, Software Update, checking E-mail on a secure server, or any other secure connections can make this squeaking noise. There are many other ways to produce it too, such as scrolling through a web page or some other more graphic-intensive process.
If you want to check and/or get rid of it, you can download the CHUD tools (part of Apple's Developer Tools, and also available separately). The Processor preference pane (formerly called Hardware) will let you disable Napping, after which point the squeaking should go away. The squeaking also goes away if you reduce processor speed by turning Energy Saver processor performance down to Reduced. However, I'd recommend that you leave Napping enabled (to reduce heat output and increase battery life), so leave it in the default state."
I've downloaded the CHUD tools program and turned off Nap mode, I think. But it still makes the noises! I cannot figure out how to reduce processor speed. So frustrating. Anyone have any advice?
