I have an iMac G5 (circa 2005) with a non intel processor, I recently purchased Snow Leopard to update this, however it advised I need an Intel Processor to install Snow Leopard. Is there a way of getting round this, the main reason being is I want to use the Magic Trackpad - but ive been told this will only run on Snow Leopard OSX? If anyone could answer this asap I would be grateful, today is the last day I can take back Snow Leopard and the Magic Trackpad to the Apple Store for a refund.
I know that's below the required speed but there's Leopard Assist. As can be seen on that page, it says "Uncertain" ONLY for my iMac.
Has anyone done it with this iMac? Does anyone know? I'm running Panther now and, these days, that's no place to be. I want to get Leopard on my Mac before I have to <shudder> switch back!
I have a PowerPC G5, with OSX 10.5.8 (Leopard). Can I upgrade to 10.7 or do I need an Intel-based Mac? I'm already finding certain apps that are not compatible with OSX 10.5.
im looking for a was to run a few pc programs on my old power mac g5, is running os x 1.4 and IS NOT an intel mac, i cant seem to find an aplication that will allow me to do this, i will happily upgrade my os if need be,
I have a Power Mac G5 2.0 GHZ 1 TB and 250GB Hard Drive, 4 GB of Ram Running 10.5.8 Leopard. Now i bougth this mac on ebay to EDIT VIDEOS AND PICTURES. BUT, i cant do either because all the editing software requires snow leopard or higher. the Mac doesnt even have I Movie, Garage Band. To get any sort of editing software i need snow leopard. To get snow leopard i have to have an Intel Based Processor MINE ISN'T INTEL. So pretty much i have NO WAYS to edit or create videos.
Info: PowerMac, Mac OS X (10.5.8), 2.0 GHZ, 1.2 TB.
I've got a G5 DP with the infamous white noise problem coming through my speakers that was only fixed after downloading the chud tools and disabling the NAP settings - does anyone know if I'll have the same issues if I install Leopard? Want to upgrade but don't want to waste my money if the noise comes back and I can't get it to work. Also, I'm using an m-audio firewire 410 that doesn't have drivers yet; has anyone used the Tiger drivers with success on Leopard?
I have an iMac Power PC G5, OS X, version 10.5.8. I am running into problems of installing programs, downloads and even Mac OS X Snow Leopard, because they are requiring an Intel processor. I do not know if Intel can even be installed. Is it possible to install Intel on my iMac?
My brother has a second gen, 800Mhz eMac (the one that could be overclocked to 1.33Ghz - the earlier PC133 ram model). Since about 1.5 mths ago, when he powers it on, sometimes it will not power on, and other times it will give three beeps (diagnostic pages say bad RAM) and a flashing power/sleep light in unison with the beeps. Did this vintage suffer bad caps? I recall that it was only the 1.25Ghz model that had bad caps, but I could be wrong.
I've just installed Mac OS X Tiger on my iMac G4 17" i know Tiger is outdated, but it's faster than Leopard and Tiger still runs fine.now i tried to install Mac OS 9 too. For some performance reasons. But after the Welcome Screen, the Display turns black and i can't see nothing It's the original Mac OS 9 CD from the iMac G4. And it's the original rom, i never changed anything. Maybe Mac OS 9 doesn't have the right kext for the iMac?
Info: iMac, Mac OS X (10.4.11), iMac G4 17" 800MHz
I've just recently purchased my Mac Pro and have tried multiple times to leave it on, with the monitor set to sleep (using hot corner) and the computer set not to sleep. The purpose is to be able to access my music library while on the go. For some reason, when I come back to the computer it won't wake, the power light is on so I'm assuming it froze or had a kernal panic.
I'm running Simplify Media and a Hawking USB wifi adapter to access my music on the go, no other 3rd party peripherals.
i have tried to re-install leopard into my macbook but it is just all a mess. i inserted leopard cd (original copy) into macbook to do a clean install to my new(to me) used macbook. the computer message after choosing language says "cannot install mac osx on this computer".
1. used disk utility to reapair disk...did no work 2. erased hd..still did not work. 3. made partition to install from external hd...now just made a total mess with computer. 4.i try to start computer from dvd drive with original leopard cd...still does not work. says cannot install mac osx to this computer...
i have macbook intel core duo 1 gig ram and enough memory.
My brother has the first generation of the iMacs that has a Core duo processor (not Core 2 Duo). Will snow leopard work on it? On Apples site, it says that you need a Intel processor to run Snow leopard, but then below it says you need a 64bit processor which is what he doesn't have.
Now, my poor little G4 was just standing there. After a lot of fumbling around, restores, it finally has regained life, running Tiger etc.
Now, I wanted to install Leopard, see for myself what I would prefer, and it would allow to tether wireless internet connection through my iPhone to the G4. But I need Leopard for that, Tiger is too old.
So, after Googling, I found out that if I put my Intel into Target Disk mode, I could use it as external DVD reader, seeing my G4's reader is dead as dead can be.
I have the old eMac that serves me just great, my requirements being minor. However, I notice that most new software won't work with a Mac without the new Intel processor. Can I update to OS 10.5 on my eMac?
As title I recently got a Apple Power Macintosh G5 1.8 running OS X 10.2.3. I want to upgrade to OS X Leopard 10.5 but have been told i cannot as my machine has the IBM 970 processor. I will be buying a genuine OS X Leopard 10.5 disc for a clean install, but need to know whether it will be able to run it.
I turn off Imac, using apple menu. Sometimes the power button will work to turn it on, other times it won't. Been to 2 authorized dealers, they can't find problem. Sometimes jiggling or shaking computer will allow me to start using power button. Sometimes I open up case, plug and unplug everything, and then power button will work. Never know when it will work or not. Power button has had continuity check. It checks fine. Power plug is fine, outlet is fine.
Info: iMac, Mac OS X (10.6.5), Partition hard drive
I have found a cheap, broken Power Mac G5 for sale on the internet. It is a 2.5 GHz dual model. The owner says that one of the G5 processors is damaged.
Will the Power Mac work with only one processor? If I bought another processor will it have to be the same speed?
i have a blue and white g3. it has a slow 400mhz processor and 640mb ram. i would like to upgrade this machine to something i can use for daily tasks. websurfing, music, videos, etc.i was thinking motherboard and processor from a g4 or g5?
I have a power mac g4 (Power Mac G4 350Mhz (Yikes, PCI graphics) (M7826LL/A) And i want to upgrade its processor to a 1.0 ghz can someone tell me where to buy one.?
I just recently switched to Mac and was given a Power Mac G4 (CPU type PowerPC G4 - 2.9). I would like to upgrade and replace the processor. Is this a possibility or would it make more sense to buy a new computer?
The 2011 macbook pro with i7 processor will not power up or charge at all. The problem started after my battery ran out and the computer shut down. Since then, when I plug in the charger only the green light turns on. In addition the light on the base (in front of the keyboard) flashes. Nothing happens when I hit the power button. The charger still works on other laptops. To emphasize, the screen will not even light up. It sounds as if the computer is starting (for less than a second) before stopping, only to start again but that is purely speculative.