PowerPC :: Airport In G3 Cannot "See" Any Wifi Networks
Oct 2, 2010
I just bought and correctly installed a working airport card to my iBook G3 (M6497) I checked and the card is being recognized and says it's on. However, it can not find any wireless networks automatically. I tried entering the name of my network manually, but it says "There was an error joining the AirPort network "NameofNetwork"." "Try again" "OK" The router doesn't have any security on it and it is compatible with 802.11b. I bought this iBook from a friend who says he could never get an airport card he bought a while back to work either.
I just installed a new AirPort card into my 2006 Mac Pro and it showed up just fine and I was looking forward to getting it online without using iPhone-tethering. BUT, I just can't get it to find any networks? What might be the problem? I've googled, rebooted, updated my drivers etc etc.
I have an apple airport (age unknown), but it is one that looks like a mushroom cap. I have a network set up in WPA2 format. A nintendo DS user wishes to connect to wifi, but requires a WEP set up. Can I run both kinds of network or must a switch back and forth (since I like WPA2 more)?
Reason for the ? is because I'm not sure if this is really a problem or not. Whenever I'm at school there are certain places (inside classrooms mostly) I get either of these scenarios: 1. I get no signal whatsoever and my AirPort doesn't even detect the network 2. My AirPort will be able to detect the school's network but when I try to connect it says "<Network name> cannot be found" 3. If I do connect I'll get such terrible 1 bar signal that it's impossible for me to do anything.
Some key facts that you must know: -Everyone else is able to connect! i.e. A student to my left, with the newer MacBook, will have a strong connectivity, and to my right will be student to my right with a Dell and has full strength connectivity. What is the deal here? -I have a wireless router that I use at home and it connects to it no problems at all for the entire time I've had it. Full strength connectivity. I have the last generation of the 12" PB 1.5.
I have a wireless network router/internet thing in one room of the house and my g5 is in another room. I also have a PC laptop and that can connect to my home's wirless internet no problem. My G5 simply cannot connect or even sense my 2wire901 home network, but it can see other networks in my home area. I only managed to connect to my own home network once! And the 2nd time my 2wire901 can never be found. Get this; it has to be the mac. Coz my laptop is sitting right next to my mac in 1 room and it has no problems connecting.
Just installed one of the original airport cards in this machine, and though all indications are that it is working correctly, it doesn't see the USR wireless router sitting 10 feet from it. No networks show up in the dropdown list, and manually adding does nothing. Encryption is a simple MAC filter (this card has already been added), and SSID is broadcast. Did I get a bad card? System profiler seems to think it's fine.
It's an original airport card. Computer's a G3 400 Mhz iMac. A G3 300 Mhz iBook with original airport card is having no troubles. Firmware of Airport card is 9.52 Firware of router is up to date. OSX 10.3.9
All help greatly appreciated; this is my moms little computer, and we're trying to rearrange and loose some wires.
I recently purchased a refurbished AirPort Extreme Card and AirPort antenna for my late 2004 Power Mac G5. My Mac is running on OS X Version 10.4.11. I properly installed them, since the computer notes the AirPort Extreme card in the "About Mac" menu. There are a couple of wireless networks near my home and the computer doesn't detect any of them. I've checked out previous forum discussions around this issue, tried some suggested troubleshooting to no avail. Can I presume the AirPort Extreme card is defective? It detects absolutely no signal from the other networks around here. Could the WEP password length of our router have anything to do with it? Do I need to download a driver to activate the AirPort Extreme Card? Could upgrading to a different operating system make it work?
I am using at home an iMac connected ( with cable ) to my Home WiFi Router. All other products are using the same WIfI home network ( Without a cable ).Can I define my iMac to use ONLY MY HOME WIFI instead of other unwanted wifi networks ?
PowerBook G4, 1.5ghz, 2gb ram, 80gb HD, Superdrive. It shows I have the AirPort Extreme card installed. Problem, I get poor (slow performance on my home wifi) and in some areas I get no signal or drop the signal. On my PC laptops I get good signal and fairly good speed. Using a Linksys wirless 2.4ghz wireless G router. Could my wireless card need replacing? If I get a wireless N router will the airport extreme card pull the N?
I've had this computer for many years and it has been trouble free. Recently, however, it's been losing the wifi signal. It'll keep it for a while, but then I'll see it fluctuate and eventually die. I can't seem to bring it back to life. I have an iPhone, apple tv and a laptop that all seem to have no trouble pickng up the wifi signal. Would this be a software or hardware issue? Could my airport card be dying? If so, is it fixable?
This is a problem I've been having for months on and off. Apple won't help (because, of course, it doesn't happen when it's in front of an Apple Genius).
But perhaps MR can help. Simple question: what could be causing my MBP to lose connection to my wifi and then not be able to find ANY wifi networks in my area (of which there are usually about a dozen)?
I've attached two images - on the right is what happens when it loses connection and then simply won't find anything.
My MacBook Air (2013 model, 1.3 Ghz Intel Core i5, 4GB 1600 MHz DDR3, OS X Version 10.9.2) which I received less than a week ago was working fine. Until last night. My latop will now not connect to ANY wifi networks. It's sees the networks but when I try to manually join one it says "The wifi network ... could not be joined" when I then run diagnostics it says "Wifi not associated" and "review wifi best practices".
Recently searched the history of my iMac to see just what was loaded into the system. What I found was that there were 3 different WI-FI networks on my iMac and I would like to know just what they belong to? One is called "Orangecat", another is "wildchild" and the last one is also "wildchild-guest". What these accounts are associated with and if they are part of the internal configuration of my iMac?
Info: iMac (21.5-inch, Late 2012), OS X Mavericks (10.9.2)
I travel a bunch. and when I open my computer to type a document or something, I don't need to waste time searching for a wifi network. and I certainly don't wanna tell 10.6 every time: "cancel -- don't pick one of these strange wifi locked networks" any one know how to stop 10.6 from nagging me about joining some strange network every time I wake the computer from sleep in a strange place?
Am using macbookpro Mac OS x v10.7.3. I connect to wifi at home and at work and they have different proxy settings. do i have to manually change the settings in wifi advanced preferences every time i log on to a wifi network>
Info: MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
I'm having major problems with airport. It seems that lately its become less and less effective at detecting wireless networks. I need to be sitting a few feet away from a router for my macbook (10.4.11) to detect it. This occurs with all networks. I never had this problem until the past year and its seemed to get progressively worse. I'm not sure if this is a confrontational or hardware issue.
I have no trouble using WiFi at home. But when I connect my new MacBook Pro to WiFi networks at cafes, airports, and hotels, I can connect and a page or two will load without a problem. But a minute or two later, the WiFi signal appears to be fine but no pages will load and e-mail messages can't be sent or received. Â
If I turn WiFi off and reconnect to the same network, I can load another page or two and then it quits working. I don't have this problem when connecting to the same networks on my iPhone, so I'm assuming there's a problem with my computer or its settings. Â
Info: MacBook Pro (15-inch Late 2011), Mac OS X (10.7.3), iPhone 4
Ok so I've had my new iMac for a week now, all is great except the internet. Its connected wirelessly, but either goes really slow or websites just say loading. All the PC's in the house work fine.
Airport is connected - however even though it is connected is always searching for networks?
The Safari is slow and sometimes doesn't work at all. However always works upon a quick computer restart.
I wonder whether I've changed a setting by accident, or is wireless just not very good on macs?
My MacBook pro isn't picking up any networks! I know my home network is working as I can connect with iPhone but airport isn't even picking up neighbours network! Is this a hardware problem do you think? I'm desperate.
I made the mistake of upgrading (funny word for what I got) to Lion, and ever since, I've had numerous issues with my trusty MacBookPro (2008, 2.4 ghz, 17"). The latest problem has been severly annoying though, and I just would like to see if any of you have some tips I could try out. Basically, every single time I close down the lid to put my computer to sleep, or even after it goes to sleep on it's own, when I go to wake my computer, it no longer is connected to my wi-fi network, and for a period of 2-5 minutes, is acts like it is searching for networks. When this exercise is over, I can use the pull down menu brought up by clicking on the wifi icon to select my network and the computer re-connects. I saw that Apple released an update for 2011 MacBookPro's that had this same issue, and this made the problem even more irritating to me since they failed to address those of us who have older computers that have the same issue. I have tried erasing all known network in the network preferences window using the plus and minus buttons, and then re-adding my network. That didn't work.
Info: MacBook Pro, Mac OS X (10.7.3), 17 inch screen, on 3rd logic board
2.8 GHz Intel Core 2 Duo iMac using OS 10.6.4. I'd like to renew/erase the Airport networks listed under the Airport logo at the top banner of my iMac. My hope is to re-install Airport Express and have a wireless network again. I have tried using Airport Utility but get no where with it. In a related question: do Airport Express devices wear out after being used for 2-3 years or are they bullet-proof? I'm wondering if that is my problem.
I'm already connected to a wi-fi and seeing as i'm on a desktop I don't think i'm going to be connecting to many others so how do I stop my AirPort card scanning for new networks constantly?
One day I noticed that my Macbook was having trouble find ANY networks available (despite knowing that many were available) - it doesn't see any. Occasionally the Airport will pick up a network or two with extremely low signal strength (even if the wireless router is in the same room) but usually has issues connecting and eventually the network disappears from Airport. At first I thought my Airport had totally crapped out and so I had to go out and spend $100 on a third party USB wifi stick (there are very few companies who make these for Mac, but for PC they can run for $15 ).
Now the crappy design of this USB wifi stick I purchased has caused the USB head to become bent and is ultimately deteriorating. SO, recently I noticed that when I use Bootcamp to run Windows 7 on my Macbook, Win7 is able to fully use my built in Airport hardware and receives great signal - so now I'm thinking that it may not be a hardware problem at all.
Last night my MacBook stopped finding any network to connect to. Usually there are about 10 networks that it picks up but now none show up not even my own network. My iPhone connects to my network fine as does my xbox and my PS3. Is there anything I can try to get airport to detect the networks around me?
I recently signed up for AT&T u-verse. As part of that service they provide you with a 2wire router. Initially my MacBook Pro (running the most recent osx) was connecting to this router fine. But, because i like the interface of my Airport Extreme router better, i decided to run a router-behind-router setup, to set up a network with my airport extreme. In other words, i ran a hardwire out of the 2wire router into my Airport Extreme, thereby allowing the airport extreme to disperse wireless signal as well. Therefore, there are currently 2 wireless networks in my house, one being dispersed from the 2wire router, and the other from my airport extreme. Both wireless networks are password protected in WEP-2.
Now i can no longer connect to the 2wire router. Everytime i try to do so, the system prompts me to type in the WEP password for the 2 wire router and upon doing so, it indicates that the password failed, the connection timed out, or that the connection failed. I've monitored the network preference pane as i'm trying to connect, and it invariably indicates that there is "NO IP ADDRESS" for the 2wire network. In fact, i can no longer connect to ANY OTHER wireless network which is password protected. It always gives me this same dilemma. The only password protected network i CAN connect to is my airport extreme network. Does anyone know what the hell is going on here? I'm completely baffled. I've gone so far as to delete all preferred networks from my system. Delete all network related passwords in the keychain access. and also to delete my network related preferences in Library ---> Preferences, to remove any 'confusion' the system might be having, but to no avail.
