I'm already connected to a wi-fi and seeing as i'm on a desktop I don't think i'm going to be connecting to many others so how do I stop my AirPort card scanning for new networks constantly?
View 1 RepliesI have a MacBook Pro with Mac OS X 10.5.8. I have recently started having trouble staying connected to the internet via my wireless connection. I'm constantly getting disconnected from the internet - the AirPort status in the menu bar can have 4-5 bars, but I can still be dropped. When I click on the AirPort status in the menu bar, you can see the AirPort status going back and forth from "AirPort: On" to "AirPort: Scanning" continuously. It's very difficult to sign up for anything online when my connection keeps dropping. It's also very difficult to watch anything that's being streamed without it buffering all the time. I'm definitely technologically challenged, but it seems like it should be working and it seems like it should be a common sense kind of thing, but I'm not able to work it out on my own - my apple care has expired and I can get NO answers from Apple unless I want to pay for them.
Info:
MacBook Pro, Mac OS X (10.5.8), Is it my new router?!
On my old PowerBook pro running tiger my network was running fine and fast using my Airport extreme. But I just purchased a MacBook Pro and started up on 10.5.6 and the airport if constantly scanning even though it has full bars on my home airport. I have tried the following one at a time and together without success:
- Changed the channel away from the neighbors
- Changed to g only instead of b/g radio mode (older airport)
- Increased the mbps rate
- Interference robustness
- Closed network
The only way the scanning stops and then only temporarily is by clicking on the airport drop down on the menu bar.
I recently installed a VPN.
The performance through the VPN is badly affected by the Airport scanning regularly; often the VPN hangs.
I have deleted the unnecessary wireless networks listed in the Advanced button under Network Preferences. However, the problem persists.
Can you advise how to either stop the scanning or stop it interfering with Internet connection?
I travel a bunch. and when I open my computer to type a document or something, I don't need to waste time searching for a wifi network. and I certainly don't wanna tell 10.6 every time: "cancel -- don't pick one of these strange wifi locked networks" any one know how to stop 10.6 from nagging me about joining some strange network every time I wake the computer from sleep in a strange place?
View 2 Replies View RelatedI keep noticing that my MacBook keeps scanning for the network I'm currently signed on to. Is this behavior normal or should I take it in to the Mac store.
View 24 Replies View RelatedPicked up a 2.8 IMac a couple days ago and for some reason when I am online it keeps auto scanning for a signal when its already connected to my wireless signal. The internet doesn't work when it does this but if I click on the spot that says auto scanning it switches to on and the internet starts working.
View 1 Replies View RelatedThe performance through the VPN is badly affected by the Airport scanning regularly; often the VPN hangs.
I have deleted the unnecessary wireless networks listed in the Advanced button under Network Preferences. However, the problem persists.
Can you advise how to either stop the scanning or stop it interfering with Internet connection?
After hours of fooling around with my Epson All-in-One scanner/printer I found out that Apple does not support Airport Extreme network scanner functions. Is there a hack or a workaround besides connecting the Epson directly to my Mac?
View 2 Replies View RelatedI'm having major problems with airport. It seems that lately its become less and less effective at detecting wireless networks. I need to be sitting a few feet away from a router for my macbook (10.4.11) to detect it. This occurs with all networks. I never had this problem until the past year and its seemed to get progressively worse. I'm not sure if this is a confrontational or hardware issue.
View 2 Replies View RelatedI just installed a new AirPort card into my 2006 Mac Pro and it showed up just fine and I was looking forward to getting it online without using iPhone-tethering. BUT, I just can't get it to find any networks? What might be the problem? I've googled, rebooted, updated my drivers etc etc.
View 9 Replies View RelatedOk so I've had my new iMac for a week now, all is great except the internet. Its connected wirelessly, but either goes really slow or websites just say loading. All the PC's in the house work fine.
Airport is connected - however even though it is connected is always searching for networks?
The Safari is slow and sometimes doesn't work at all. However always works upon a quick computer restart.
I wonder whether I've changed a setting by accident, or is wireless just not very good on macs?
I have an apple airport (age unknown), but it is one that looks like a mushroom cap. I have a network set up in WPA2 format. A nintendo DS user wishes to connect to wifi, but requires a WEP set up. Can I run both kinds of network or must a switch back and forth (since I like WPA2 more)?
View 2 Replies View RelatedI'm at work so i haven't had a chance to try it yet, but i was thinking:
one band for 802.11n 5ghz
one band for 802.11n (2.4)/b/g/a/whatever
one "guest" network
can you do all three separately at the same time?
My MacBook pro isn't picking up any networks! I know my home network is working as I can connect with iPhone but airport isn't even picking up neighbours network! Is this a hardware problem do you think? I'm desperate.
View 6 Replies View Related2.8 GHz Intel Core 2 Duo iMac using OS 10.6.4. I'd like to renew/erase the Airport networks listed under the Airport logo at the top banner of my iMac. My hope is to re-install Airport Express and have a wireless network again. I have tried using Airport Utility but get no where with it. In a related question: do Airport Express devices wear out after being used for 2-3 years or are they bullet-proof? I'm wondering if that is my problem.
View 1 Replies View RelatedReason for the ? is because I'm not sure if this is really a problem or not. Whenever I'm at school there are certain places (inside classrooms mostly) I get either of these scenarios:
1. I get no signal whatsoever and my AirPort doesn't even detect the network
2. My AirPort will be able to detect the school's network but when I try to connect it says "<Network name> cannot be found"
3. If I do connect I'll get such terrible 1 bar signal that it's impossible for me to do anything.
Some key facts that you must know:
-Everyone else is able to connect! i.e. A student to my left, with the newer MacBook, will have a strong connectivity, and to my right will be student to my right with a Dell and has full strength connectivity. What is the deal here?
-I have a wireless router that I use at home and it connects to it no problems at all for the entire time I've had it. Full strength connectivity. I have the last generation of the 12" PB 1.5.
One day I noticed that my Macbook was having trouble find ANY networks available (despite knowing that many were available) - it doesn't see any. Occasionally the Airport will pick up a network or two with extremely low signal strength (even if the wireless router is in the same room) but usually has issues connecting and eventually the network disappears from Airport. At first I thought my Airport had totally crapped out and so I had to go out and spend $100 on a third party USB wifi stick (there are very few companies who make these for Mac, but for PC they can run for $15 ).
Now the crappy design of this USB wifi stick I purchased has caused the USB head to become bent and is ultimately deteriorating. SO, recently I noticed that when I use Bootcamp to run Windows 7 on my Macbook, Win7 is able to fully use my built in Airport hardware and receives great signal - so now I'm thinking that it may not be a hardware problem at all.
Last night my MacBook stopped finding any network to connect to. Usually there are about 10 networks that it picks up but now none show up not even my own network. My iPhone connects to my network fine as does my xbox and my PS3. Is there anything I can try to get airport to detect the networks around me?
View 1 Replies View RelatedI recently signed up for AT&T u-verse. As part of that service they provide you with a 2wire router. Initially my MacBook Pro (running the most recent osx) was connecting to this router fine. But, because i like the interface of my Airport Extreme router better, i decided to run a router-behind-router setup, to set up a network with my airport extreme. In other words, i ran a hardwire out of the 2wire router into my Airport Extreme, thereby allowing the airport extreme to disperse wireless signal as well. Therefore, there are currently 2 wireless networks in my house, one being dispersed from the 2wire router, and the other from my airport extreme. Both wireless networks are password protected in WEP-2.
Now i can no longer connect to the 2wire router. Everytime i try to do so, the system prompts me to type in the WEP password for the 2 wire router and upon doing so, it indicates that the password failed, the connection timed out, or that the connection failed. I've monitored the network preference pane as i'm trying to connect, and it invariably indicates that there is "NO IP ADDRESS" for the 2wire network. In fact, i can no longer connect to ANY OTHER wireless network which is password protected. It always gives me this same dilemma. The only password protected network i CAN connect to is my airport extreme network. Does anyone know what the hell is going on here? I'm completely baffled. I've gone so far as to delete all preferred networks from my system. Delete all network related passwords in the keychain access. and also to delete my network related preferences in Library ---> Preferences, to remove any 'confusion' the system might be having, but to no avail.
I have a wireless network router/internet thing in one room of the house and my g5 is in another room. I also have a PC laptop and that can connect to my home's wirless internet no problem. My G5 simply cannot connect or even sense my 2wire901 home network, but it can see other networks in my home area. I only managed to connect to my own home network once! And the 2nd time my 2wire901 can never be found. Get this; it has to be the mac. Coz my laptop is sitting right next to my mac in 1 room and it has no problems connecting.
View 5 Replies View RelatedI've got a airport express a little over a year old. I use it as a wireless router together with a netgear modem. Worked fine till about a month ago. What happened was it just decided to not let me log on one day. I reseted it to factory settings and could not create a network afterthat. Kept saying network error. I took it into a mac store to get it fixed and apparently it's fine. Took it back home perplexed, gave it a couple more tries and it just decided to work again.
Now... after having no more issues with it for over a month. One night i just dropped off the network again (i use a macbook). Could not find my user network... so i reseted it again... same problem all over again. What's strange is i took it into work and it was fine! Netwrok was easily detectable. Anyone experiencing issues like this? Does location ( i don't know, maybe my apartment has too many wireless users?) have anything to do with this.
Just installed one of the original airport cards in this machine, and though all indications are that it is working correctly, it doesn't see the USR wireless router sitting 10 feet from it. No networks show up in the dropdown list, and manually adding does nothing. Encryption is a simple MAC filter (this card has already been added), and SSID is broadcast. Did I get a bad card? System profiler seems to think it's fine.
It's an original airport card.
Computer's a G3 400 Mhz iMac.
A G3 300 Mhz iBook with original airport card is having no troubles.
Firmware of Airport card is 9.52
Firware of router is up to date.
OSX 10.3.9
All help greatly appreciated; this is my moms little computer, and we're trying to rearrange and loose some wires.
When I click the Airport Networks icon in the menu bar (top right), my airport detects all the available networks. It lists some networks which are not mine and don't even require a password. Is there some way to remove these specific networks from the list, and so they don't get detected again? (I don't want to click by mistake a network that's not mine)
View 8 Replies View RelatedMy Mac (osx Lion) is constantly looking for wifi networks.I recently changed provider and have a new router and thought this may help but it the same. On a windows vista laptop I have I found a setting to alter how often the laptop looks for WiFi signal. Is there a setting on the mac that will do similar?Â
Info:
iMac (21.5-inch Mid 2011)
I like to open up news websites to get my news. I find a story I am interested in and click the link and read the story. The problem is that when I return to the front page of that website, Safari immediately refreshes the page and makes me wait a few seconds before I can click on another link I was interested in. It is extremely annoying to have to wait for a refresh everytime I go back to the page. Seems a lot worse after the 5.1.7 update.
Info:Mac OS X (10.7.4)
I have an Airport Extreme with Dual Band Networks, and an airport express 802.11n edition. I have setup the Base station to do N,A,G,and B Networks, but I only want the express to EXTEND the G Network. How can I make that happen?
View 6 Replies View RelatedEvery time I close my MBP screen I have to re-enter my WEP password for my wireless network. This is very frustrating and I'm not sure if it is just an issue with keychain or if it is something else. If it is keychain I have no idea how to fix it as I have tried everything I know.
View 2 Replies View RelatedI recently purchased a refurbished AirPort Extreme Card and AirPort antenna for my late 2004 Power Mac G5. My Mac is running on OS X Version 10.4.11. I properly installed them, since the computer notes the AirPort Extreme card in the "About Mac" menu. There are a couple of wireless networks near my home and the computer doesn't detect any of them. I've checked out previous forum discussions around this issue, tried some suggested troubleshooting to no avail. Can I presume the AirPort Extreme card is defective? It detects absolutely no signal from the other networks around here. Could the WEP password length of our router have anything to do with it? Do I need to download a driver to activate the AirPort Extreme Card? Could upgrading to a different operating system make it work?
View 8 Replies View RelatedWhy does my browser constantly have to stop playing when I watch You Tube or other videos?It stops and then starts up again after a few seconds and then stops again and re-starts.Happens on both Safari and Firefox.
Info:
iMac, Mac OS X (10.6.8)
