I'm at work so i haven't had a chance to try it yet, but i was thinking:
one band for 802.11n 5ghz
one band for 802.11n (2.4)/b/g/a/whatever
one "guest" network
can you do all three separately at the same time?
I have an Airport Extreme with Dual Band Networks, and an airport express 802.11n edition. I have setup the Base station to do N,A,G,and B Networks, but I only want the express to EXTEND the G Network. How can I make that happen?
View 6 Replies View RelatedI recently purchased a refurbished AirPort Extreme Card and AirPort antenna for my late 2004 Power Mac G5. My Mac is running on OS X Version 10.4.11. I properly installed them, since the computer notes the AirPort Extreme card in the "About Mac" menu. There are a couple of wireless networks near my home and the computer doesn't detect any of them. I've checked out previous forum discussions around this issue, tried some suggested troubleshooting to no avail. Can I presume the AirPort Extreme card is defective? It detects absolutely no signal from the other networks around here. Could the WEP password length of our router have anything to do with it? Do I need to download a driver to activate the AirPort Extreme Card? Could upgrading to a different operating system make it work?
View 8 Replies View RelatedI'm having major problems with airport. It seems that lately its become less and less effective at detecting wireless networks. I need to be sitting a few feet away from a router for my macbook (10.4.11) to detect it. This occurs with all networks. I never had this problem until the past year and its seemed to get progressively worse. I'm not sure if this is a confrontational or hardware issue.
View 2 Replies View RelatedI just installed a new AirPort card into my 2006 Mac Pro and it showed up just fine and I was looking forward to getting it online without using iPhone-tethering. BUT, I just can't get it to find any networks? What might be the problem? I've googled, rebooted, updated my drivers etc etc.
View 9 Replies View RelatedOk so I've had my new iMac for a week now, all is great except the internet. Its connected wirelessly, but either goes really slow or websites just say loading. All the PC's in the house work fine.
Airport is connected - however even though it is connected is always searching for networks?
The Safari is slow and sometimes doesn't work at all. However always works upon a quick computer restart.
I wonder whether I've changed a setting by accident, or is wireless just not very good on macs?
I have an apple airport (age unknown), but it is one that looks like a mushroom cap. I have a network set up in WPA2 format. A nintendo DS user wishes to connect to wifi, but requires a WEP set up. Can I run both kinds of network or must a switch back and forth (since I like WPA2 more)?
View 2 Replies View RelatedMy MacBook pro isn't picking up any networks! I know my home network is working as I can connect with iPhone but airport isn't even picking up neighbours network! Is this a hardware problem do you think? I'm desperate.
View 6 Replies View Related2.8 GHz Intel Core 2 Duo iMac using OS 10.6.4. I'd like to renew/erase the Airport networks listed under the Airport logo at the top banner of my iMac. My hope is to re-install Airport Express and have a wireless network again. I have tried using Airport Utility but get no where with it. In a related question: do Airport Express devices wear out after being used for 2-3 years or are they bullet-proof? I'm wondering if that is my problem.
View 1 Replies View RelatedReason for the ? is because I'm not sure if this is really a problem or not. Whenever I'm at school there are certain places (inside classrooms mostly) I get either of these scenarios:
1. I get no signal whatsoever and my AirPort doesn't even detect the network
2. My AirPort will be able to detect the school's network but when I try to connect it says "<Network name> cannot be found"
3. If I do connect I'll get such terrible 1 bar signal that it's impossible for me to do anything.
Some key facts that you must know:
-Everyone else is able to connect! i.e. A student to my left, with the newer MacBook, will have a strong connectivity, and to my right will be student to my right with a Dell and has full strength connectivity. What is the deal here?
-I have a wireless router that I use at home and it connects to it no problems at all for the entire time I've had it. Full strength connectivity. I have the last generation of the 12" PB 1.5.
I'm already connected to a wi-fi and seeing as i'm on a desktop I don't think i'm going to be connecting to many others so how do I stop my AirPort card scanning for new networks constantly?
View 1 Replies View RelatedOne day I noticed that my Macbook was having trouble find ANY networks available (despite knowing that many were available) - it doesn't see any. Occasionally the Airport will pick up a network or two with extremely low signal strength (even if the wireless router is in the same room) but usually has issues connecting and eventually the network disappears from Airport. At first I thought my Airport had totally crapped out and so I had to go out and spend $100 on a third party USB wifi stick (there are very few companies who make these for Mac, but for PC they can run for $15 ).
Now the crappy design of this USB wifi stick I purchased has caused the USB head to become bent and is ultimately deteriorating. SO, recently I noticed that when I use Bootcamp to run Windows 7 on my Macbook, Win7 is able to fully use my built in Airport hardware and receives great signal - so now I'm thinking that it may not be a hardware problem at all.
Last night my MacBook stopped finding any network to connect to. Usually there are about 10 networks that it picks up but now none show up not even my own network. My iPhone connects to my network fine as does my xbox and my PS3. Is there anything I can try to get airport to detect the networks around me?
View 1 Replies View RelatedI recently signed up for AT&T u-verse. As part of that service they provide you with a 2wire router. Initially my MacBook Pro (running the most recent osx) was connecting to this router fine. But, because i like the interface of my Airport Extreme router better, i decided to run a router-behind-router setup, to set up a network with my airport extreme. In other words, i ran a hardwire out of the 2wire router into my Airport Extreme, thereby allowing the airport extreme to disperse wireless signal as well. Therefore, there are currently 2 wireless networks in my house, one being dispersed from the 2wire router, and the other from my airport extreme. Both wireless networks are password protected in WEP-2.
Now i can no longer connect to the 2wire router. Everytime i try to do so, the system prompts me to type in the WEP password for the 2 wire router and upon doing so, it indicates that the password failed, the connection timed out, or that the connection failed. I've monitored the network preference pane as i'm trying to connect, and it invariably indicates that there is "NO IP ADDRESS" for the 2wire network. In fact, i can no longer connect to ANY OTHER wireless network which is password protected. It always gives me this same dilemma. The only password protected network i CAN connect to is my airport extreme network. Does anyone know what the hell is going on here? I'm completely baffled. I've gone so far as to delete all preferred networks from my system. Delete all network related passwords in the keychain access. and also to delete my network related preferences in Library ---> Preferences, to remove any 'confusion' the system might be having, but to no avail.
I have a wireless network router/internet thing in one room of the house and my g5 is in another room. I also have a PC laptop and that can connect to my home's wirless internet no problem. My G5 simply cannot connect or even sense my 2wire901 home network, but it can see other networks in my home area. I only managed to connect to my own home network once! And the 2nd time my 2wire901 can never be found. Get this; it has to be the mac. Coz my laptop is sitting right next to my mac in 1 room and it has no problems connecting.
View 5 Replies View RelatedI've got a airport express a little over a year old. I use it as a wireless router together with a netgear modem. Worked fine till about a month ago. What happened was it just decided to not let me log on one day. I reseted it to factory settings and could not create a network afterthat. Kept saying network error. I took it into a mac store to get it fixed and apparently it's fine. Took it back home perplexed, gave it a couple more tries and it just decided to work again.
Now... after having no more issues with it for over a month. One night i just dropped off the network again (i use a macbook). Could not find my user network... so i reseted it again... same problem all over again. What's strange is i took it into work and it was fine! Netwrok was easily detectable. Anyone experiencing issues like this? Does location ( i don't know, maybe my apartment has too many wireless users?) have anything to do with this.
Simple question: Of the new features in the new AirPort Extreme Base Station, which of these could become available to the old AirPort Extreme Base Station via a software/firmware update? I have to think that at least some of the new features don't actually require new hardware. Just trying to figure out if I want to shell out $179 for a new AEBS when my current AEBS works pretty well as it is.
View 21 Replies View RelatedJust installed one of the original airport cards in this machine, and though all indications are that it is working correctly, it doesn't see the USR wireless router sitting 10 feet from it. No networks show up in the dropdown list, and manually adding does nothing. Encryption is a simple MAC filter (this card has already been added), and SSID is broadcast. Did I get a bad card? System profiler seems to think it's fine.
It's an original airport card.
Computer's a G3 400 Mhz iMac.
A G3 300 Mhz iBook with original airport card is having no troubles.
Firmware of Airport card is 9.52
Firware of router is up to date.
OSX 10.3.9
All help greatly appreciated; this is my moms little computer, and we're trying to rearrange and loose some wires.
When I click the Airport Networks icon in the menu bar (top right), my airport detects all the available networks. It lists some networks which are not mine and don't even require a password. Is there some way to remove these specific networks from the list, and so they don't get detected again? (I don't want to click by mistake a network that's not mine)
View 8 Replies View RelatedI just got a time capsule and replaced my extreme with it then added my 2 expresses to the network. Was getting 28-33mbps download speeds using speedtest.net to test now i'm getting only 4-6mbps. WTH!!! Also the transfer rate for backing up my macbook to the tc drive is ridiculous!!!
View 2 Replies View RelatedI have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
I have previously time machine backups for two macbook pros on same drive. However, I connect the drive to the airport extreme and although I see the drives and the backups, I can not access the files over Airport Extreme.
Info:MAC Book Pro, Mac OS X (10.6.4)
Just a question for those who have used the Airports. Can a USB hub be used to expand the number of devices the Airport can use? i.e., an external hd, a laserjet, and an inkjet.
View 4 Replies View RelatedThis might seem an odd question but I had to replace my last Airport Extreme base station as it was faulty....I've now got the newer "Dual Band Extreme Base Station". I want to avoid any conflicts with my old settings for my wireless network with my MBP. Should I uninstall the last version of Airport Utility?Is there anything else anyone would recommend before i install or connect the new hardware/software?
View 2 Replies View RelatedCan it? If it can, would Airtunes still work like normal.
In other words, can I be connected to my Airport EXTREME and Airtunes would still work since the Airport EXTREME and EXPRESS are using the same network wifi-name (the Express is just extending the Extreme's range).
The latest upgrade of AIrport Utility doesn't support my Airport extreme, but the old version 5.6.1 says it doesn't work in Lion. How was I managing my Airport before th 6 update? What do I do now? Will I have to get a new Airport?
I have DSL service. I have an iPod Touch and an iPad 1 that I'm trying to connect. I just upgraded both iDevices to iOS5. I've been having trouble keeping an internet connection live for them, but now I can't even get the wi-fi to connect.
Info:
AirPort Extreme, Mac OS X (10.7.4)
Just bought a new Airport Time Capsule 3TB for backup purposes and to use as the main router in my home (model number A1470 the latest tall one). I was originally using an AirPort Extreme (model number 1408 approx 6" square and 1' tall) for my main router. Â
I got the TC setup and putting out good wifi signal, but would like to take my Extreme and extend it off the TC to boost signal in other parts of my house, but having some difficulty. I searched the forums and found setup instructions to do this, but I get a message saying, "unexpected error. Try again." Well, tried again and still no luck.Â
Info:
Airport Extreme
Every time I close my MBP screen I have to re-enter my WEP password for my wireless network. This is very frustrating and I'm not sure if it is just an issue with keychain or if it is something else. If it is keychain I have no idea how to fix it as I have tried everything I know.
View 2 Replies View RelatedI just purchased an Airport Extreme 802.11a/b/g/n to use as my home wifi router. I have two Airport Expresses 802.11b/g. I want to use one for Airtunes to my stereo and another for wireless printing.
View 1 Replies View RelatedI currently have the apple extreme as my wireless router. It works great. I absolutely love it. I have two macbook pro's (wife and I both have one) and use it for my PS3 and Xbox 360. I started a new job and was given a free HP desktop (not my choice, but hey, it's free, so what can I say). The desktop is not wireless and I am not able to put my computer near the airport extreme because my TV already owns that territory. Today I bought the Airport express to use as a bridge (and other things in the future). I have plugged it in. I opened the airport utility using my macbook. It finds my extreme and my express. I select that I want to set up the express. I select that I want to set it up using an existing wireless network. I select my airport extreme. It tells me that it has to restart the express. I wait approximately 3 minutes. It then tells me that the settings to the express have been changed but it's not able to find it.
My main goal is to use the express as a bridge. I have the express plugged in beside the desktop and want to run an ethernet cable from the express to the desktop to allow for wireless capability.
