I use a G5 Powermac at work that is hooked to a KVM switch that seems to render the eject key inoperable. Is there another way to open the drive tray so I don't have to unplug the KVM switch and hook the keyboard directly to the mac every time I need to insert a CD?
Information:
15" Powerbook G4 1.67mhz, 2g RAM, 128mb VRAM); 4gen iPod (40g); Airport Extreme
Mac OS X (10.4.3)
1.67mhz, 2g RAM, 128mb VRAM
My cd tray will not open the only way I can open it is by using the terminal commands "drutil open" and "drutil close"
Info:
PowerMac, Mac OS X (10.4)
I can't eject the CD from my iMac. There is no icon representing the CD on my desktop and the CD is spinning constantly
Info:
iMac, iOS 5.1
If you can't eject a CD or DVD or open the drive tray
Info:
MacBook Pro, iOS 5.1.1
Both my daughter and I have an imac and the disc keeps coming out. It takes 1 - 2 hours to get the disc to stay in and be recognized.
Info:
iMac
I replaced a defective DVD drive with a new Pioneer super drive in a Mac Pro G5 which meant I had to manually pull out the tray and remove the bezel on the front of the tray so the tray will pass through the mirror door cavity.
After I pushed the tray back into the drive to install the drive in the G5 I somehow managed to jam something because the tray will not open at all now. The motor attempts to open the tray and pressing the little manual tray release (paper clip through the pin hole) doesn't work either.
My CD tray is stuck in my powermac G5, I keep pressing the button to eject it on my keyboard but nothing happens, I've tried restarting it. Unfortunately there isn't a CD in the drive so I can't drag the icon to the trash which is what the apple support site said, but I just want to open the drive to put a CD in? All the keys on my keyboard work fine except that bloody eject button. Its one of the older keyboards, not the flat ones that you get now, its the version before that.
View 3 Replies View Related my first question is: where can I get a quick start to "take control" of my brand new used G5 late '05 2.3 dual core Power Mac? I'm accustomed to going to device manager to check on things, update or disable drivers, partition, reformat, set selective start-up, you know; all that. I bookmarked something like Switch 101 and am left shy of the depths I wish to go.
I've fiddled with an acquaintance's MacBook Pro and found it somewhat intuitive, so navigation in and around the apps won't be too difficult to switch over to but how can I do something like pick and choose what I want to show up in my task bar or whatever the Macquivalent is.
And secondly, F12 opens the Dashboard not the DVD tray. Option F12 doesn't help. Unless I need to literally "hold F12 until the open tray appears..." or something like that. That hasn't worked either.
I'm sure I won't regret the switch. I've been threatening to for the last three or four years; five of which is my level of PC-ing.
I spilt coffee on my keyboard and after cleaning it the "space bar" will not work and the "Z" key sticks, so I am now using an old iMac keyboard that doesn't have a Volume or Eject button. So how do I open the DVD tray ?
is there an icon that can be place up the top right hand corner like the volume control ?
my friend just got a mac pro today, how do you open the disk tray? i have a macbook so mine's just a slot.
View 13 Replies View RelatedFor future reference: what is the best way to get open the CD tray (if installer disc needs to be put in) if your system won't boot? I thought I would ask in case this situation arises. I'm not using a Mac keyboard and there is no eject button on my keyboard. It's a G4 with mirrored doors but I don't see any buttons to eject the tray.
View 3 Replies View RelatedI did a search for this but turned up nada. How do I open the tray for the CD drive on an i-Mac G4?
View 4 Replies View RelatedI've been looking and looking and couldn't find anything. The DVD tray is stuck in the open position and won't retract. When I hit the eject button, it moves like it's trying, but only travels about 1/4". I tried gently nudging it in, and that didn't work, so then I tried a bit firmer and combos of that plus tilting it. Nothing's working.
Also, I figured that maybe it just crapped out on me, so I'd get a new one, but I don't think you can get the drive out if the tray is open, because you just pull the housing straight out, right?
Apple thinks there is no need for a button on the tower. Now I can't open or close the CD tray without the mouse. Via right click I can open it at least but to close it, I have to push the drawer, which I'm not a big fan of, as the machine is brand new and cost me 4k.
I'm having a problem getting my CD drive door to open (the CD drive was empty when the problem started). Have tried pushing and holding down keyboard eject key, holding down mouse key while restarting, and typing "eject cd" in open format. When I do these things, the drive repeatedly makes a sort of "grunt" (effort noise) but doesn't pop open, so this appears to be a mechanical problem. I removed the drive faceplate and was finally able to open the drive by pushing the manual eject button and pulling on the tray, though it requires some finagling and doesn't always work. When the tray does open this way, it does not automatically roll all the way out or back in, but has to be pulled/pushed, and once it shuts, it once more can't open without manual intervention. However, I discovered that as long as there's a CD in the tray, it opens and closes fine. While always keeping a CD in the drive is a temporary fix.
Information:
G4 Mirrored Drive Doors
Mac OS X (10.4.10)
I can't open my CD/DVD Drive on my Mac, when I press the eject button ontging happend ...
Info:PowerMac, Mac OS X (10.5.8)
I've searched the forums pretty thoroughly, but no one has listed these exact symptoms.
I've got a PowerPC G5 running 10.4. After four years of dedicated service, my Superdrive gave out, so I bought a Sony drive (SONY DVD RW DRU-842A in profiler) to replace it.
Here's the trouble:
Any time the machine goes to sleep with a disc in the drive, it won't eject when I wake it up. I have to restart, then eject. Other than that, the drive works beautifully. If this question has been answered elsewhere, please redirect me there, sorry for the repost.
Speaking of sleep, when I put the machine to sleep through the menu it goes fully to sleep (no fan/other noise). But when it goes to sleep on its own, I can still hear the machine churning away. My roomate has a newer Mac Pro that doesn't do this.
My PowerMac thinks the optical drive is open. No matter what I do, I cannot get the disk inside to load and I cannot open the drive to get it out. I'v tried f12 several times and have eject in my menu bar.
Info:
PowerMac, Mac OS X (10.5.8), MDD: G4 single, 2 GB Ram, 160 GB HD
I ran a search and the only program I came up with is Toast 10.
Just today, my TSST DVD writer tray will not stay closed during or after booting my G5. The "Eject" key will operate it normally, but a few seconds after I close it the tray will open again... and stay open. Same thing happens if I manually close it. No disc is in the tray. This problem is 100% repeatable. I reset the PRAM in my G5. I have "Patchburn v 4.0.5" software for the TSST CDDVDW SH-S222L installed, and I re-installed it but with no effect on the problem.
Info:
PowerMac Dual 2.7 GHz G5, Mac OS X (10.4.11), Desktop G3 (1997) upgraded CPU, RAM, Hard Disks
having read all the posts about the superdrive failures, mine seems to have died although it is a strange one. It's a Pioneer 107D and it reads, writes, and ejects if a disk is in it (sometimes)...however it will not open (without my trusty paperclip) from keyboard, fkey, drag disk to trash, startup with mouse button held, etc. etc. Terminal mode (drutil etc.) says drive is ok as does About my Mac. I can hear the mechanical attempts to open, but only the ol' paperclip seems to do the job. Any thoughts??? If I replace it are there any thoughts as to what people find reliable? I am thinking Litescribe at the moment (I do not "need" DL or BluRay).
Information:
G5 dual 1.8 Ghz
Mac OS X (10.4.11)
1 gig ram
on my Mac G5 the iphoto and itunes will not open
Info:Mac OS X (10.7.3)
I have problems opening PP. It looks as though it tries to open a couple of files that were left open when I logged off, with no success. Do you know how to block the opening of previously left open files when I launch the program?
View 3 Replies View RelatedI bought this MacBook on eBay a week or so ago, it's showing as ~8 weeks old right now and it was new in box with all the wrappings when I first bought it. I haven't used the SuperDrive at all until today when I installed Microsoft Office and the Garage Band sound pack. I'm positive I didn't cause this damage; one because I have taken care of this MacBook like it was my baby, and two because I don't see how this would have been possible by me. The picture is kinda hard to see, sorry it was difficult to try and get a good steady shot of it. I'm clueless as of what to do about this.
View 7 Replies View RelatedI am looking for a keyboard tray. I need one that will attach to the bottom of a wooden (or fake wood possibly) ikea desk. I don't care about ergonomics, I just want my keyboard a few inches lower (and hiding it away will be nice) to fit the aluminum apple keyboard w/ numeric pad and possibly a mouse.
View 2 Replies View RelatedI have been browsing the WWW for information on the Hard Drive Tray in a Mac Pro. I cannot locate the dimensions of the tray or locations and spacing of the hard drive mounts.
View 2 Replies View RelatedI can't get the mac icon to come up in the window's tray. Everything else works fine. anyone have an idea?
View 6 Replies View RelatedI've tried to open this a million times, it seems hardware related, As a matter of fact, the performance of the tray opening has been declining recently. It reads and writes just fine, I hate to relace this unit if its a simple rubber band issue...
Info:
Mac Pro 8 Core
I still have a couple of OLD apps that require System 9. When I attempt to open either of them I get the "Classic is starting" progress bar, but it never quite finishes. I can start Classic okay with extensions off but then I can't use the printer, and my old copy of Photoshop Elements won't load no matter what I try. I get an error message when I try to run "Install Applications and Classic Support" from my installation disk. I really don't want to part with the $$ for System 10.4 AND two new pieces of software right now.
Information:
power mac g5
Mac OS X (10.3.9)
???
View 2 Replies View Related