For future reference: what is the best way to get open the CD tray (if installer disc needs to be put in) if your system won't boot? I thought I would ask in case this situation arises. I'm not using a Mac keyboard and there is no eject button on my keyboard. It's a G4 with mirrored doors but I don't see any buttons to eject the tray.
View 3 RepliesI have a 2.0ghz unibody macbook, and i installed windows xp on the boot camp partition, installed drivers, up until here everything was working fine.. i decided it would be a good idea to upgrade to bootcamp 2.1 and then suddenly the boot camp icon in my system tray went away,
and so did the nvidia panel and the sound no longer worked.. now im stuck and i have no sound. I tried reinstalling the drivers using the cd and it still doesnt work.. also when i remove my headphones there is a red light coming from the jack.. how do i get my sound back?
Followed this guide [URL] and everything went smoothely, except when I came to step 24 I dont see the icon in the system tray. Also tried to run the program in the boot camp folder, but nothing happens. No big deal I think, but would be nice to have everything work properly.
View 1 Replies View Related my first question is: where can I get a quick start to "take control" of my brand new used G5 late '05 2.3 dual core Power Mac? I'm accustomed to going to device manager to check on things, update or disable drivers, partition, reformat, set selective start-up, you know; all that. I bookmarked something like Switch 101 and am left shy of the depths I wish to go.
I've fiddled with an acquaintance's MacBook Pro and found it somewhat intuitive, so navigation in and around the apps won't be too difficult to switch over to but how can I do something like pick and choose what I want to show up in my task bar or whatever the Macquivalent is.
And secondly, F12 opens the Dashboard not the DVD tray. Option F12 doesn't help. Unless I need to literally "hold F12 until the open tray appears..." or something like that. That hasn't worked either.
I'm sure I won't regret the switch. I've been threatening to for the last three or four years; five of which is my level of PC-ing.
I spilt coffee on my keyboard and after cleaning it the "space bar" will not work and the "Z" key sticks, so I am now using an old iMac keyboard that doesn't have a Volume or Eject button. So how do I open the DVD tray ?
is there an icon that can be place up the top right hand corner like the volume control ?
my friend just got a mac pro today, how do you open the disk tray? i have a macbook so mine's just a slot.
View 13 Replies View RelatedMy cd tray will not open the only way I can open it is by using the terminal commands "drutil open" and "drutil close"
Info:
PowerMac, Mac OS X (10.4)
I did a search for this but turned up nada. How do I open the tray for the CD drive on an i-Mac G4?
View 4 Replies View RelatedI've been looking and looking and couldn't find anything. The DVD tray is stuck in the open position and won't retract. When I hit the eject button, it moves like it's trying, but only travels about 1/4". I tried gently nudging it in, and that didn't work, so then I tried a bit firmer and combos of that plus tilting it. Nothing's working.
Also, I figured that maybe it just crapped out on me, so I'd get a new one, but I don't think you can get the drive out if the tray is open, because you just pull the housing straight out, right?
Now I have a problem with my other iMac. I had this problem once before. The first time, I was moving it to connect an ethernet cable to it. I unplugged it, moved it, connected the cable and a mouse, and plugged it back in. I fixed this by unplugging the cable and the computer. Then I plugged it back in and it worked. This time, I moved it, connected the cable, a keyboard and mouse, and nothing, other than a slight light dim and the crt "tink". Now I cannot get it to even turn on. Nothing. I press the power button, nothing. I have tried 3 cables and four different recepticals, nothing. HELP!!! Now both of my g3 iMacs are down....
View 2 Replies View RelatedI use a G5 Powermac at work that is hooked to a KVM switch that seems to render the eject key inoperable. Is there another way to open the drive tray so I don't have to unplug the KVM switch and hook the keyboard directly to the mac every time I need to insert a CD?
Information:
15" Powerbook G4 1.67mhz, 2g RAM, 128mb VRAM); 4gen iPod (40g); Airport Extreme
Mac OS X (10.4.3)
1.67mhz, 2g RAM, 128mb VRAM
Apple thinks there is no need for a button on the tower. Now I can't open or close the CD tray without the mouse. Via right click I can open it at least but to close it, I have to push the drawer, which I'm not a big fan of, as the machine is brand new and cost me 4k.
I can't eject the CD from my iMac. There is no icon representing the CD on my desktop and the CD is spinning constantly
Info:
iMac, iOS 5.1
If you can't eject a CD or DVD or open the drive tray
Info:
MacBook Pro, iOS 5.1.1
Both my daughter and I have an imac and the disc keeps coming out. It takes 1 - 2 hours to get the disc to stay in and be recognized.
Info:
iMac
I replaced a defective DVD drive with a new Pioneer super drive in a Mac Pro G5 which meant I had to manually pull out the tray and remove the bezel on the front of the tray so the tray will pass through the mirror door cavity.
After I pushed the tray back into the drive to install the drive in the G5 I somehow managed to jam something because the tray will not open at all now. The motor attempts to open the tray and pressing the little manual tray release (paper clip through the pin hole) doesn't work either.
I've been reading this site for a while now, first time I'm posting. I recently purchased 8 GB of RAM for my 2010 13" MBP. There are two 4 GB DDR3 PC3-10500 1333mhz sticks. When I install them in the laptop my computer does not get past the apple logo boot screen (the spinning disc freezes). However, I can boot into Windows (boot camp) without issues.
Also, when I pair either of the 4 GB sticks with one of my old 2 GB stock sticks the laptop boots up fine in OS X. The system profiler registers it as 6 GB of 1067 mhz RAM (the stock sticks are 1067 mhz)
is there a way to keep the menu bar open always, without altering system codes or erasing system folders? when anything is in full screen, it disappears and I want to see the clock.
Info:
iMac
I have done some research on triple boot systems, and it appears that a third OS must be run virtually, but all the information I came across was a few years old. Microsoft is running a deal right now on Windows 7 for students so I would like to pick up a copy and try it out.
Is it possible to run 3 operating systems through Boot Camp 3.0? I am not interested in running a virtual OS.
Current Setup:
13" macbook pro
Snow Leopard and Windows XP through Boot Camp
Just an FYI. Tech Support at Allsoft states The Disk Warrior 4.2 Boot DVD will not Boot the new 2010 MBP's. They are waiting for information (software) from Apple.
Will need to use Target Mode or another Mac connected with Firewire till then. Boot from that then run DW from your MBP.
My CD tray is stuck in my powermac G5, I keep pressing the button to eject it on my keyboard but nothing happens, I've tried restarting it. Unfortunately there isn't a CD in the drive so I can't drag the icon to the trash which is what the apple support site said, but I just want to open the drive to put a CD in? All the keys on my keyboard work fine except that bloody eject button. Its one of the older keyboards, not the flat ones that you get now, its the version before that.
View 3 Replies View RelatedJust today, my TSST DVD writer tray will not stay closed during or after booting my G5. The "Eject" key will operate it normally, but a few seconds after I close it the tray will open again... and stay open. Same thing happens if I manually close it. No disc is in the tray. This problem is 100% repeatable. I reset the PRAM in my G5. I have "Patchburn v 4.0.5" software for the TSST CDDVDW SH-S222L installed, and I re-installed it but with no effect on the problem.
Info:
PowerMac Dual 2.7 GHz G5, Mac OS X (10.4.11), Desktop G3 (1997) upgraded CPU, RAM, Hard Disks
I've searched the forums pretty thoroughly, but no one has listed these exact symptoms.
I've got a PowerPC G5 running 10.4. After four years of dedicated service, my Superdrive gave out, so I bought a Sony drive (SONY DVD RW DRU-842A in profiler) to replace it.
Here's the trouble:
Any time the machine goes to sleep with a disc in the drive, it won't eject when I wake it up. I have to restart, then eject. Other than that, the drive works beautifully. If this question has been answered elsewhere, please redirect me there, sorry for the repost.
Speaking of sleep, when I put the machine to sleep through the menu it goes fully to sleep (no fan/other noise). But when it goes to sleep on its own, I can still hear the machine churning away. My roomate has a newer Mac Pro that doesn't do this.
I bought this MacBook on eBay a week or so ago, it's showing as ~8 weeks old right now and it was new in box with all the wrappings when I first bought it. I haven't used the SuperDrive at all until today when I installed Microsoft Office and the Garage Band sound pack. I'm positive I didn't cause this damage; one because I have taken care of this MacBook like it was my baby, and two because I don't see how this would have been possible by me. The picture is kinda hard to see, sorry it was difficult to try and get a good steady shot of it. I'm clueless as of what to do about this.
View 7 Replies View RelatedI am looking for a keyboard tray. I need one that will attach to the bottom of a wooden (or fake wood possibly) ikea desk. I don't care about ergonomics, I just want my keyboard a few inches lower (and hiding it away will be nice) to fit the aluminum apple keyboard w/ numeric pad and possibly a mouse.
View 2 Replies View RelatedI have been browsing the WWW for information on the Hard Drive Tray in a Mac Pro. I cannot locate the dimensions of the tray or locations and spacing of the hard drive mounts.
View 2 Replies View RelatedI can't get the mac icon to come up in the window's tray. Everything else works fine. anyone have an idea?
View 6 Replies View RelatedI've tried to open this a million times, it seems hardware related, As a matter of fact, the performance of the tray opening has been declining recently. It reads and writes just fine, I hate to relace this unit if its a simple rubber band issue...
Info:
Mac Pro 8 Core
This is a case where that extra few millimeters in tray position meant the drive was physically incompatible with the Mac Pro. Before I go shopping for a new drive, I'd like to find out if you guys have recommended brand/models that you KNOW fits into your Mac Pros (because you installed it and it works, duh).
View 17 Replies View RelatedI'm a Mac newbie and wanted to know how you make a 'stack' on the icon tray at the bottom of the screen. If someone could make a short list of what to click that would be amazing!
Info:
MacBook Pro with Retina display, Mac OS X (10.7.4)
