My hard drive crashed and now I need to reinstalled everything but I'd like to know what would be the latest system version? I have two mac book pro I want to upgrade: the one that crashed is a 12" from 2004 I believe. and a 17" from 2006, this one runs on Mac OSX 10.4.11 which I believe is the latest I can use on this one.
Info:
MacBook
Pro, Mac OS X (10.4.11)
I have a 2006 Core Duo MacBook. I shut it down the other day and nothing unusual happened. But, now when I push the power button there's no response at all. Nothing. No lights, no response, no chimes, no screen flicker.Yes, I've read all posts I can find on this and nothing has helped. I've followed the SMC reset (http://support.apple.com/kb/HT3964) and can't zap PRAM since it doesn't even chime. Battery shows a full five lights and the MagSafe cord shows a green LED. I've tried all sorts of booting with just battery, just power, leaving both out overnight but can't get any sort of response. I don't hear any fan motion or HDD whirring up. The power button doesn't seem to be stuck though--it's flush with the case and still gives that slight tactile "click" when depressed. I checked that the RAM's set properly.
View 1 Replies View Relatedif this hard drive would work in my late 2006 macbook.
View 1 Replies View RelatedIs it Leopard 10.5.6? I know I can't use Snow Leopard. Is it worth it? Where can I get it least expensively, it's not in stores.
View 3 Replies View RelatedHow capable is the video in the latest mac mini? *edit* 2009 2.0ghz 9400m graphics 4gb 1066ram. 128gb ssdI'm looking to offload my 07 mac pro and use my mini for a while whilst I get a little more cash and wait for a good deal on the (aussie) refurb store for a new mac pro. But in the mean time while using the mini I'd like to run my 30" dell at native res, and a 24" dell at native res. Would the vid card on the mini handle this? I don't intend gaming or doing anything hugely graphic intensive.
View 13 Replies View RelatedTried to install latest system upgrade on Pro. Won't restart. Bootstrapper crashed: trace/bpt trap:5. What can I do to get my computer working?
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.7.3)
I'm in the market for a speaker system for my new Mac Book Pro 17" and 24" Apple Cinema Display setup. Currently, I'm using really old speakers that, in my opinion, did fine. In other words, I didn't really do any sound studio like activities that warrants me to get the top of the line system.
Essentially, I'm just looking to upgrade (it is 7 years old). Is there anything out there right now that is "the best bang for the buck?" In other words, provide great sounds, it's innovative, it's essentially to this Apple setup, etc. etc.
I have succeeded at this in the past but no luck now. My MyBook is attached to my Mac Mini (10.4.11) but it doesn't announce itself on the desktop.FYI, MyBook blue circle is lighted but not swirling.
View 1 Replies View RelatedI heard that Snow leopard was the latest operating system for OSX right?
Does it come preinstalled if I am going to buy a macbook today?
Apple keep telling me I need to update to icloud but I'm not sure if Lion will work on my Mac. I've upgraded to snow leopard which seems to have knackered my .me or .mac account (whatever it's called now), so I don't seem to have any option but to upgrade to Lion if I every want to see my emails again. Apple say I must have a Intel Core 2 processor for Lion to work. at least I think that's what they say. I have a mac book pro, 2006 with an 2.16 GHz Intel Core Duo processor, can I update to Lion?
Info:
macbook pro, Mac OS X (10.4.10)
is there a way to keep the menu bar open always, without altering system codes or erasing system folders? when anything is in full screen, it disappears and I want to see the clock.
Info:
iMac
I am a proud owner of a MAC powerbook G4 for just over 3 years now. It runs MAc OX 10.3. For the last two weeks i have been having issues. First it started to be very slow. Then it would not boot up and i got a blue screen. I ran the file system checks from the OS X and it complained about the volume being bad and said it could not be repaired. i decided to reinstall the whole thing and did a complete erase and install. IT booted up fine. The software updater asked permission to update which i agreed.
After the update was over, the software updater had more updates. I guessed that it was probably giving me updates in the chronological order. During a particular update, it gave the blue screen and "please restart" ... and when i rebooted it did not come up... just a blue screen... i verified the filesystem using the diagnostic tool and it again said it was corrupt .... I have done this twice now and i have a feeling it happened when i was updating the same batch of software updates.... sometimes my software updater would crash everytime i launch it.....
I was asked to performed a system update with a reboot which I proceeded to do. Once the reboot was complete I had lost my system time (which had been reset to December 31, 2000 and my background had been replaced with the original generic MAC background. I have been unable to find the source of this issue and I am unsure how to fix this. I was able to change my clock by adjusting the Date & Time Preferences and fix my background image as well, but I am concerned that this is a temporary fix. Has anyone else experienced this with a system update?
View 2 Replies View RelatedThere's speculation that it's L2 cache is bigger than the 3mb used on the slower mac mini core2duo's.
View 1 Replies View Relatedcould not be sure whether the Admin user - password reset with the CD would be the solution to my question as suggested in previous threads I searched - and have no idea where my start up install CD is
So my question-
I was trying to put parental control to ask for password when my computer starts up. I did something I guess and messed up the info.
I can log in with my own account when I restart my apple - which says now it is a standard account (must have messed that up)- but can not make any changes on system preferences or anything else that requires login and password. It requires Admin info. My own login that I use now used to be my admin so do not have any other info set.
now on system pref - accounts - an account titled "test" seems to be admin but can not even access that and reverse myself to be the admin since I can not unlock system pref. Or cant click on "Login Options" for the same reason.
There are no other users on this computer than me.
What do I need to do to make myself admin again?
Hope this was somewhat a clear question
I have an extensive collection of fonts (60,0000+). Several hundred of them will crash my system when I open one of them in Finder (double-click the suitcase). I picked one at random for some serious examination. I looked at my sample with many font tools. My latest tool was FontDoctor (v5 and v7). FontDoctor reported "no problems found" with my font. Yet the crash persists. Any tool that can do a thorough job of investigating and repairing my corrupt fonts.
Info:
G4, Mac OS 9.2.x
I recently took the plunge and installed Lion after being content with Snow Leopard....well now I have quite a few issues. When I open system preferences for some reason it automatically opens to Network...why I'm not sure. When I click show all, then click sharing, I can't make any changes in the Sharing preferences without my entire system locking up. I can't force quit or anything. I can still use the mouse but all I have is the rainbow wheel!
I have searched and searched and haven't been able to fix it. I have tried booting into the Guest account and the same problem happens there. I have trashed all the plist files everyone says to try. I have tried repairing permissions etc. I feel like I have tried everything. Is there anything else that I can do without have to do a clean re-install. I'm hearing if I do this that I won't be able to migrate my files from by backups due to permission problems?
I also took a look at my system log and it is full of this!
Jul 3 22:24:26 jessica-imac com.apple.launchd[1] (com.apple.Kerberos.digest-service[1307]): Exited with code: 1
Jul 3 22:24:26 jessica-imac com.apple.launchd[1] (com.apple.Kerberos.digest-service): Throttling respawn: Will start in 10 seconds .....
Info:
Mac OS X (10.7.4)
Using a G4 IBOOK with OS 10.5.8. Recently converted IBOOK from just my wifes computer to both of us so it is now dual usuage with both of us signing in to our respective files/e-mail, etc. My side has a problem never experienced before. My apple mail system address book has all the names the dock address book does but is missing almost 2/3rd of the actual e-mail addressess. I have tried to redo the dock address book in hopes it would change the "internal" mail book, but to no avail. It id difficult to add a recipient to an outgoing e-mail via the dock address instead of the apple mail address book.
View 3 Replies View RelatedI have a g5 with sys 10.5.8 , that I just bought and old mac documents from 10 years ago.
For some reason it will not read them. How does one get old documents translated into something usable.
Secondly, the old system software and applications no longer seem to work with the new machine, is there a way to use those. The mac was always great about being able to use several system folders and their applications.
Recently viewed this Apple web page. In Addition to my G5, I have a G3 running 9.2.2. Is there any point in moving later versions of the named files listed in the Apple web page into the System Folder of the G3, or is that just asking for trouble? Improved performance of 9.2.2, or disaster?
Info:
PowerMac Dual 2.7 GHz G5, Mac OS X (10.4.11), Desktop G3 (1997) upgraded CPU, RAM, Hard Disks
How do I install MAC OSX on an iMac that does not have any system installed on it? How to insert the install DVD ( after turning it on)? I have iMac G4
View 1 Replies View RelatedAnyone know of a driver for OS9.0.4, usb to midi?
Info:
PowerMac, Mac OS 9.0.x, G4
I've been reading this site for a while now, first time I'm posting. I recently purchased 8 GB of RAM for my 2010 13" MBP. There are two 4 GB DDR3 PC3-10500 1333mhz sticks. When I install them in the laptop my computer does not get past the apple logo boot screen (the spinning disc freezes). However, I can boot into Windows (boot camp) without issues.
Also, when I pair either of the 4 GB sticks with one of my old 2 GB stock sticks the laptop boots up fine in OS X. The system profiler registers it as 6 GB of 1067 mhz RAM (the stock sticks are 1067 mhz)
I noticed that my system stopped making system (i.e. Mac OS X) sounds for some reason. Sounds from applications are fine. I checked and unchecked the "play user interface sound effects" check box in the preference panes to no effect.
View 2 Replies View RelatedI punch my iTunes music through an Airport Express to a remote set of speakers in the kitchen, which works wonderfully, but I'd like to know if there's a way to run the system sounds through the AE as well. In particular, I listen to Pandora (through a browser) on my laptop, but would love to listen in the kitchen. Any way to do this? System 10.4 I believe...
View 4 Replies View RelatedI'm going to pull the trigger on a 2.93GHz Quad next week. I want the high clock speed and now that I'm fairly confident it will handle more than 8GB of RAM, I think this is the best bang-for-the-buck choice for me.Here are the RAM options I'm considering...1. Buy it with 3GB installed, wait a month to see what happens to 4GB DIMM pricing and possibly buy 12GB in a month or so.2. Buy it with 6GB installed and then wait for a few or more months for 4GB DIMM pricing to come down and buy 12GB whenever it seems reasonable. Then try to sell the 6GB on ebay.I'm going to go with 12GB sooner or later, it's just a matter of when. The issue with buying 6GB now is that I may not actually save much by waiting for the 3x4GB to come down... depending on how much I can get for the 6GB.
View 8 Replies View RelatedI have a macbook with leoaprd installed. I wish to set it up as an FTP server so that i can remotely access my files. If i do it thru sharing in the system preferences, the ftp server is setup. But its limited to my home network only. How can i share it over the internet knowing that i have dynamic ip and theres no static ip service here.
View 3 Replies View RelatedI am looking to buy a new printer for my G3 using system 10.2.8 Need to do photos.
I need name of printer that can be used for this system
i am downloading a lot of stuff (movies and music) from rapidshare and other file-hosting sites. Do i need a virus scanner or smthing like clean my mac ?? is it ok from downloading and not getting anything from them (trojans..etc)
View 1 Replies View RelatedI've been upgrading my mp1,1 recently, and I'm now wondering what would be the best ram configuration. I'm thinking of getting a minimum of 8 GB. I don't need to max out the machine or anything. It's just that I currently have 2x512MB + 2x1GB = 3GB and I am thinking I should ditch those and get nice matching sticks with more capacity. A few general questions: I hear the mp1,1 takes 667 MHz ram, but can support 800 MHz sticks (it will just run them at 667).
Any purpose in getting 800 (i.e. compatibility with more machines in case I upgrade in the future), or should I just go for the cheapest? I've heard of triple channel ram (i.e. 3 sticks per riser) - does the mp1,1 support that or is it for newer machines only? I've also heard that using 4 sticks on a single riser is the fastest config (or was it 2 sticks per riser?). I'm thinking of getting 4 GB sticks. Can I use 8 GB sticks? Worth it? Basically, I'm wondering what the general consensus is on the ultimate memory config for mp1,1.
