I have a mirrored drive door G4 [dual 1.25 GHz] with 10.2.8. I would like to make a bootable clone of this drive on an external hard drive, to use in case this computer fails somehow.I know there is software available to do that. Are there any particular mistakes a person could make in doing this that someone here can identify and explain how to avoid?
View 3 RepliesI am planning to buy a 500GB laptop harddrive, put it in an enclosure, and use CarbonCopyCloner to make a bootable clone of my Mac's internal 500GB Drive. This way, if there is a problem with my internal drive, I can just swap in the cloned drive and boot from that, never missing a step. However, I am wondering if this is a good strategy. What if something else fails on my mac like the motherboard - would I be able to boot my cloned drive on another mac?
View 3 Replies View RelatedI have been a user of SuperDuper! for some time and understand the process of making a bootable clone of my startup drive. The other day, my bootable backup drive crashed. It was an Iomega that had been partitioned and worked fine as a bootable backup until the drive itself failed. The Iomega was a Firewire 400 drive.
When I bought a replacement, I bought a Western Digital FW 800/400, USB 2, eSata connection system. 1 TB. I partitioned it and created a bootable clone with the latest version of SuperDuper! The operation went smoothly until I tried to actually boot from the newly created clone. I could select the clone from the Startup Disk panel, but my Mac refuses to boot from it. It looks, then says, "Hmmm! I think I'll start up from the internal drive." I have another WD FW 400, USB 2.0 drive and it is bootable as well as a LaCie FW 400 that I can make bootable. Only this one drive that has no specific FW 400 port will not boot. I tried it as FW 800, no dice. I connected with the adapter cable to the FW 400 port, no joy.
I can return this WD drive for exchange. My question is should I expect the same results if I exchange it for another drive of the same type? Or is there a chance that a new drive of the same type will work?
PowerMac, dual G5 2 Ghz, OS X 10.4.11. It has a FW 800 port as well as FW 400.
i want to install windows 7 on a partition on my macbook pro, but would also want to do it from my usb hard disk. is it possible to format the disk in leopard, so i can boot from it? i know how to do it in windows and BIOS, but have no clue how to in osx.
View 8 Replies View RelatedI have an old G4 system with Pro Tools recording software and related Plug-Ins installed and running flawlessly. Bad news is that the drive is about 9 yrs old and I want to make a backup before selling it to someone so they can have a bootable backup drive instead of having to re-install the whole system if the internal drive craps out.
The OS is 9.2.2. It is not classic and has no version of OS X on it t all.
How do I make a bootable clone of the whole system discs, apps an all, to an external firewire drive?
Here is my dilemma I bought a g3 600mhz on ebay for 90 dollars works beautifully updated the memory to 640mb need to change the dvd drive and would like a bigger harddrive however i do not have the restore discs that came with it. I am currently running 10.4.11 tiger and can't afford the full version. How can I just clone the harddrive to the new one???
View 1 Replies View RelatedI own a PowerMac G4, 1.25GHz. It came with no OS (donated by my local college to my high school and eventually given to me for my services in fixing this and the other 6 PowerMacs, and the 7 iMac G5s), so my IT teacher and I copied OS X 10.4.11 from one like it. That is currently my primary OS. We read online while thinking about upgrading his and mine Apple PCs to 10.5 Leopard, about the system requirements. They all line up [URL]:
- A Mac computer with an Intel, PowerPC G5, or Power PC G4 (867 MHz or faster) processor
- 512 MB memory or more
- A DVD drive for installation
- 9 GB of available disk space or more
With a 1.25GHz PPC, 2Gb of RAM, and an 80Gb Seagate IDE HDD, I'm all set up, right? On Friday, before the end of the day, I copied OS X 10.5.7 Leopard from an iMac G5 w/ G5 iSight (late 2006 model). We plugged it into his iMac G5, runs like a charm. Plug it into the "test" G4 (exactly like mine, but only one Seagate 80Gb IDE HDD), and it took a while, but it booted. So today, I copied it to my blank Seagate 80Gb, assuming that it would boot like the LaCie External HDD did (yes, that worked too).
It finishes copying, I reboot, hold option, punch in the lock code, and Low AND Behold... No Seagate. Mac OS X 10.4.11. But no Mac OS X 10.5.7. Okay. So I boot back to Tiger and recopy. Try to open a couple programs, they work (Office 2008 Word, Dreamweaver CS3, and iTunes 9.2). No problem. Open System Preferences, choose Leopard as the initial boot device, reboot. Mac starts up, and I get the screen with the little folder that alternates between the question mark and the Finder icon.
Tried to create a bootable clone using Disk Utility & got this:“Restore Failure, Recovery partition restores can only be done on GPT partition maps.”I may need to purchase Carbon Copy Cloner ($40) or Super Duper ($28).I had been using my free CCC v. 3.4.7 to make clones of OS X 10.6.8 but now I upgraded to OS X 10.9.4 & got message that CCC not compatible with Mavericks unless I buy the CCC v. 3.5.6.I read several places that DU can do back up clones same as CCC or SD!I launched DU from recovery system, selected Mac HD as source & my XHD as destination. Both are formatted Max OS Extended (Journaled)So, what am I doing wrong?Also, what advantages, if any, are there in using CCC or SD instead of the free DU?
Info:
iMac, OS X Mavericks (10.9.4), 4 GB RAM, Win XP Pro-Boot Camp
I used Super Duper to create a bootable clone on an external firewire drive.
When I restart my MBP holding down the option key I can choose the external drive. OSX (104.11) starts to load and then encounters a name and password popup. Entering the administrator name and password of the original drive fails. Only one account on the machine - still using the admin password originally chosen.
I have a G4 400 Mac desktop running plotter software that I need to put on a new drive in the same machine. The current drive is making clicking sounds at start up that probably indicate poor drive health. How do I clone the current drive to a new drive in a way that will allow me to just switch start up to the new healthy drive and keep running the plotter software as usual?
View 3 Replies View RelatedIs there a way to keep my iTunes music on my internal harddrive and have TV shows/movies automatically download to my external harddrive?
View 3 Replies View RelatedCan Carbon Copy Cloner clone my internal drive and media drive on one bootable back up?
I believe time machine can but I like the idea of bootable back ups.
What I want is. 250GB internal + 500GB media CLONED to 1TB drive.
My internal HD failed. I have a recent Super Duper bootable Clone connected with FW800. The option key at startup doesn't allow me to access the clone drive. I press the start key, wait for the "bong," hold down the option key and nothing happens - just whiring, some crunchy sounds and a solid blue screen. I was able to reset the PRAM using the command-opt-P-R keys and got the 2nd "bong", but that hasn't helped the problem. It's a 2008-9? MBP running 10.6.? I've order a replacement internal drive. I was hoping to be able to boot to the clone and work in the meantime.
View 1 Replies View RelatedI feel incredibly dumb but can you buy something to put inside an ibook (or any laptop for that matter) to give you more space to save things? or do you have to buy an external drive? I can see lots of info about memory upgrading (which makes your computer more efficient yeah?) but nothing about this, is this because it's so obvious that I should know?
Sorry for this silly question, bit I read a lot of threads where the point is to clone a HD to one another. When doing so, with the applications installed, does it mean that the copy is fully functional, applications are copied and run despite protection codes, etc.. ?? It means that everyone can clone its applications on someone else HD and up and running ?
View 2 Replies View RelatedI used Carbon Copy Cloner to create a bootable backup of my internal hard drive. I was wondering how you initiate the bootable backup if I do have an internal hard drive failure? Do I just plug the drive in and power the computer on? Are there any other steps/precautions I should consider.
View 2 Replies View RelatedI purchased win7 from win741. 1) Is the purchased download a full version or upgrade only version?2) How do I make the downloaded iso into a bootable dvd (i.e. retail dvd)?3) Which program should I burn it with (besides Toast)?
View 11 Replies View RelatedI would like to make my usb memory bootable. Is it any way to get the drive to show up in startup items in sys.prefs? I have tried with fdisk, hdiutil and diskutil but have not been able to select my drive. I thought it was going to happen with fdisk. Typing fdisk /dev/disk1 gives me this.
View 6 Replies View RelatedI have a 13 inch Aluminum Late 2008 MacBook. Processor 2 GHz Intel Core 2 Duo, Memory 4 GB 1067 MHz DDR3, Software Mac OS X Lion 10.7.4 (11E53). Currently I have a 160 GB SATA disk as my hard drive a d 4 GB of memory. (Is it time to upgrade or what?) I recently bought a Western Digital 1 TB internal hard drive to replace my exisiting internal hard drive. I spent a lot of time last night trying to first- connect this new hard drive to my computer so that I can then clone the existing hard drive and then hoping that I would get that done so I could install the new hard drive. No such luck.
My current hard drive is partitioned as follows:
Name: Macintosh HD
Format: Mac OS Extended (journaled)
Size: 132.5 GB
Name: BOOTCAMP
Format: Windows NT File System (NTFS)
Size: 26.69 GB
When I was partitioning the new drive I did so as follows:
Name: Macintosh HD
Format: Mac OS Extended (Journaled)
Size: 973.51 GB
Name: BOOTCAMP
Format: MS-DOS (FAT) --- This was the only option that I was given that I thought would work. I did not have the option of "Windows NT File System (NTFS) to choose from. Question # 1: is that going to be a problem? I only run 1 program on Windows and that is the only reason I have BOOTCAMP on there at all. However, I do HAVE to have that program. Like I said it didn't give me the option to choose Windows so I didn't know where to go with this. Any help with that would be awesome.
Size: 26.34 GB (I just used the same size that was current, or close to it.) I connected the Western Digital 1 TB through an external device, partitioned it as stated above, and then used Carbon Copy Cloner to clone the drives. The first one went through fine. (It took 2 hours and I went to bed before it finished.) This morning I woke to see that it had gone through well. I then started the process with the BOOTCAMP drives. However, before I started it gave me errors stating that I wouldn't be able to run Windows off of the Cloned BOOTCAMP drive. Question #2: Is it because of the Format type I chose when partitioning?
Info:
MacBook (13-inch Aluminum Late 2008), Mac OS X (10.7.3)
I want to make a bootable ram disk for my apple machine.
View 7 Replies View RelatedI want to clone my hard drive to use on my new one. i dont have an external hd enclosure, though, and would be happy if i didnt have to buy one. i was hoping i could make a clone onto my networked time capsule, then replace the hard drives and somehow boot from the clone from my time capsule.
View 6 Replies View RelatedI was installing a software update on my mother's Intel iMac. While installing, the iMac told me that there was a problem and to contact the software manufacturer. When I went to reboot, it would not. All I get is the universal sign for stop (circle with a 45 degree angle line through it). My mother has no backups whatsoever. She needs her information. I am in need of a safe way to retrieve her information.I have tried the basic help from Apple's site--nothing worked. A friend told me that I might be able to boot the computer from a bootable external hard drive and pull the information off that way.
View 3 Replies View RelatedI want to install Windows 7 on a friends' computer, which at present, has no working OS on it. The tricky part is her optical drive is totally kaput. I've been able to find some instructions on how to make live USBs in leopard (like these), but so far, none of them have been bootable by a PC.
When I try to use the disk utility's "restore" function, I get an error message saying "Could not validate source - error 254"
I've googled around for other possible solutions, but haven't turned up anything. Has anybody here been able to figure this out?
I'm trying to install windows 7 on my macbook, i couldn't put the iso disk image on a dvd because my macbook will not read a bank dvd (that's a separate problem)So i was wondering if there was a way to "burn" the iso file on a flash drive and boot it up from through when I'm on Boot camp assistant.
View 1 Replies View RelatedI have purchased a new ssd for my macbook pro, can I connect the new ssd via usb to my macbook pro and use time machine to load only the files i want to keep and the swap the old hd for the new ssd.
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.4)
After Lion's release last summer, I downloaded it and made a bootable Lion flash drive, which works great. Now, I want to burn Lion from the flash drive to a DVD. On the flash drive, when I open Contents of "Install Mac OS X Lion.app," I do not see a Shared Support folder. Can I make a bootable DVD from my bootable Lion USB flash drive?
View 11 Replies View RelatedWhat's the Best Application to make a bootable disk image of your hard drive ?
View 5 Replies View RelatedIf I but Lion as a £20.99 download – how do I make a bootable disc if things go wrong?
Info:iMac, Mac OS X (10.7.1)
i have made a bootable lion hard drive before and it worked fine. But after the 10.7.4 update i am unable to make another one. When i follow the usual steps
1- download lion from app store
2- show package contents
3- contents- shared contens- drag and drop them dmg file into disk utility (something along those lines).
4-restore drive (external hard drive) and drag the lion file to the 'source' area and the external hard drive to the 'destination' area.
5- When i hit restore it does everything but at the end it says something like "failed, invalid argument'?
Info:
MacBook Pro, Mac OS X (10.7.4)
I want to make my external hard drive a bootable drive, how do I do it?
Info:
MacBook Pro, Mac OS X (10.7.3), I want to upgrade my lion.
