I have recently convinced my dad to switch to macs. He has now bought an iMac and a macbook air so I am helping him set them up. He works a lot from home so he uses a scanner called Canon ScanFront 220P, here is a link: [URL] I cannot find a driver so I can install it. I have never used a scanner like this myself so I'm kinda clueless now
View 11 RepliesIs it possible to use printer Canon LBP-810 with Mavericks?
Printer is to old, but i like it.
Info:
iMac, OS X Mountain Lion (10.8.2)
I have an Imac, with CS3. I use Iphoto to import my images straight from my canon 50D camera, which has been very easy for me to do. I've been importing jpegs up until now. Yesterday I attempted to import about 50 RAW images, but an error occurred and would not import them. So i suspect the error is because i am trying to import RAW images.
View 2 Replies View RelatedI have an Intel iMac running OS 10.7.3 and I'm trying to print to a Canon IPF610 wide format printer. I keep getting a garodclfilter error : 3000. I can print to it from my old Mac G5 running 10.5.8 with no problems. I do have the latest driver installed from Canon's website and also tried reinstalling it several times without any luck.
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
How do I scan a document from my Canon MG5250 to my new IMAc?
Info:
iMac, Mac OS X (10.7.3)
I have just upgraded to OS mavericks. My Canon MP550 printer, scanner worked fine on the old Mac. However, with the new Mac the printer works but the scanner doesn't. What should I do to make it work?
Info:
iMac, OS X Mavericks (10.9.3)
I have installed the Canon MP380 printer driver for my new imac but I cannot find it listed under the Canon model name in Printer Setup. All I see are "gimp beta" this or that. When I try to print the text is too small. It's not filling up the standard size piece of paper I am printing on. What am I doing wrong here??? This is very confusing.
View 4 Replies View Relatedi just purchased an iMac 2.66GHz Intel Core 2Duo (Snow Leopard 10.6.2) and I installed Canon Digital-Photo-Professional 3.7.3 (upgraded from Canon's website).I soon had big problems with the Canon Raw sw: after the start up of the application, every command I try to operate (even a simple click in the menu bar) makes the infamous coloured wheel to appear and I have to wait 10-15 seconds, and sometime more, for the command to be operated.I found on the Canon site this "cryptic" statement about the installation of DPP 3.7.3 on Snow Leopard: "Improvements to Mac OS 10.6 Compatibility Issues have been made, to fixes the following problems that occurred with Mac OS 10.6.
***This does not guarantee the software will work correctly in all Mac OS 10.6 environments.***"So what should this mean? Does it work or not?I also tried to go back installing DPP 3.4.1 but it's the same horrible story.I'd like to hear from people who is experiencing similar problems with the same configuration I have (Snow Leo and DPP).
I am trying to print from my iMac to a Canon SELPHY ES 1 using Gutenprint v5.2.3 driver and connected using a USB cable. The printer and Mac recognise each other but it doesn´t work.
Info:
iMac, Mac OS X (10.7.3)
I have a Canon RebelXS digital camera. Do I need to install the specific Canon Software to my IMAC to upload my photos or will IMAC software support this upload?
View 1 Replies View RelatedI would like to use a perfectly good Canon Pixma ip4200 printer with OSX Mountain Lion 10.8.5 and Yosemite 10.10.1 on my 2013 model iMac but Canon say they do not do a driver for these more recent versions of OSX later than 10.7. Is there any way to get this to work?
View 1 Replies View RelatedI have a Canon mp450 multifunction printer attched to my windows machine. I have shared the printer to my wireless network and my other windows machines can print to it with no problem at all but... Both of my macs will not print to it. I have tried to go through the printer setup wizard but it doesnt find my printer under default browser. So I searched for it under my network and found it and added it but the printer still doesnt print. I am brand new to mac but I am loving it other then this one issue.
View 1 Replies View RelatedI have just bought a brand new iMac and this is my first ever mac. Downstairs we have a Windows XP PC that has a canon iP4500 printer connected to it. I am trying to connect to it on my mac over the wireless network in our house. The printer is set up to be shared and works over the network as we can print from our Windows Vista Laptop wirelessly. Our wireless network is set up over a Belkin router. On my mac I am managing to see files on the computer that the printer is connected to. On that PC I can see shared folders on my mac. When I go to print something on my mac i get the error "Error Number : 311 Printer is in use or an error has occured. If an error has occured eliminate the cause of the error." See below - Thumbnail 1] And on the windows pc in the print queue window the print job shows up as a "Remote Downlevel Document" with a file size of 0kb and nothing gets printed. I have visited canons website and tried all OS X drivers including the CUPS version and NON-CUPS version. I do not know what I am doing wrong in my printer setup.
View 13 Replies View RelatedAfter numerous attempts to get this printer to install in snow leopard,i still cant get it to work,has anyone had any luck with this model? or any ideas or what to try?
View 1 Replies View RelatedRunning SL 10.6.1 I have the following two printers: Canon i860 and the Canon S9000 connected to my computer via a USB bridge. I have downloaded the lastest drivers from Canon for both of the above mentioned printers. I have even switched (for the 860) to the driver that was supplied by Apple. Every time I print, the colors are super dark and the colors are also off. IE a bright ruby red will be maroon in color. The color is completely off. I have tried printing from Photoshop CS3, iPhoto 09 and also Canon Easy Photo Print. The colors will come out pretty much the same no matter what I am using. I have changed out my inks. Didn't work. I have tried pretty much every setting under the above programs and nothing is printing correctly. I have never had this problem. I don't know if it is Canon's driver issue under SL or if this is a printer issue for both of my printers. I have sent in a request to Canon but in the mean time, trying to figure this out. I have printed 50 pictures of the same picture trying to get the color down and nothing is working. I have searched google, made sure I had the correct ICC for the printers and printer paper. The only thing I haven't done, which I am just thought about as I am typing this is trying connecting the printer directly to my Mac Pro instead of going through the bridge. Does anybody else have any suggestions on what I should do? I have also been reading this thread:[URL:....] which lead to the following page. [URL:....]
View 2 Replies View RelatedI have purchased a Canon D480 for my office and I am trying to network the multifunction Canon through my Time Capsule. I have a MacBook Pro and the Canon D480 is unable to auto detect the IP address so that I can print. I downloaded the drivers from Canon's website, dropped the Canon folder from the disk that came with the Printer into my Mac HD, added the canon printer and now I get a error message stating that the "recipient not found". I tried to manually add the IP Address, subnet mask and the gateway address and that hasn't worked either. I'm at my wits end and I'm not a technical person. Is there anyone that can help me with this problem?
View 4 Replies View RelatedCan I use my Canon BJC-85 with my MacBook Pro OS X 10.5.6
View 1 Replies View RelatedI have a canon MX870 and a new iMac running Lion. Printer works great, but won't send or receive faxes.
Info:
iMac
I've just moved from Windows 7 to a new iMac, and nearly everything has been smooth with the transfer - except my scanner.
I have a Canon LiDE 30 which works perfectly well with my Windows box but does nothing at all when I plug it into the iMac. I've not loaded anything like the Canon scanner toolbox, and I can't find anything relevant on a search apart fromn some pre-Lion stuff. I don't know enough yet about my iMac to fiddle
I am getting nowhere with installing the Canon LiDE 210 scanner software on my 2010 MBP. All I get when I try to scan is "insufficient memory". I can scan using Image Capture and with the trial VueScan software so the problem looks as if it is something to do with the Canon software or the way that it installs on the MBP.
Info:
Canon LiDE 210, Mac OS X (10.7.4)
I am using a Canon MP620 all in one with my MacPowerbook running Leopard 10.5.8. My Canon software is MP Navigator 1.05. The printer is agonizely slow. Sometimes after I press the print button it can take over a minute to even start. This not only occurs when I first start up but after the printer has been in use. This occurs when printing black and white text or pictures. I have been going through a hub and have not yet tried a direct connect which I will shortly. Anyone got any ideas or is this just a slow printer?
View 2 Replies View RelatedProblem: Canon MP560 printer won't print from 2008 Macbook Pro 10.6.5. It is recognized, I can print a sample page from the printer utility, but InDesign CS5, Acrobat Pro, Word 2011, text edit, Firefox, etc won't print to it. I'm not sure what caused this to start happening, as I've had this printer for almost a year. It is recognized on both USB and WIFI, yet neither connection works.
View 1 Replies View RelatedCanon advertises this printer as having ONLY Windows drivers, however there is a solution if you are interested in buying the printer (I bought one for around AUD150, delivered in Melbourne). As reported in Macosxhints here there is an OSX driver for the Canon LBP3000. Go to the linked Canon page (which is in Japanese) then scroll to near the bottom of the page for links to the driver (MXCAPT160). Download that and install it. Edit: The printer dialogue (when you attach it) is then in English. It doesn't offer all the options available in Windows (mainly output quality & economy modes) but is fine for straightforward printing to A4, letter, legal, A5, A6 and a couple of Japanese envelope sizes (Yougata-4 approximates DL).
View 6 Replies View RelatedI just picked up a Canon mp500 printer. It is Bluetooth enabled. Canon has a Bluetooth adapter (extra purchase) that plugs into the USB port. Is there any reason why a non-Canon Bluetooth adapter won�t work?
View 24 Replies View RelatedI've got several Apple computers in a network. I'm using a Canon multifunctional PM600R for printing. It's connected on a iMac DV with a USB-cable. I'm using a Vigor wireless router. It was alle working perfectly. With my Powerbook I could use the printer wireless. Recently I bought a MacBook with Leopard. Up until today I can't print wireless. When I connect the Canon printer directly (USB), it will print. But that's it. I've downloaded the most recent software from the Canon website. Unfortunately, it won't work. In printer configuration I just can't select the printer because it doesn't show up in the window of the Canon IJ network tool.
View 3 Replies View RelatedOK, it seems that the only alternative to a huge Samsung duplex laser would be one of these printers.
But as it doesn't duplex for fax, the workaround would be to duplex scan and then send the fax from the computer.
Or as a last resort, fax from memory card or USB stick. Is it even possible to do that?
it's been a year I have been using a mac and I am 200% enthusiast about it, I also managed to solve all the problems, until now...
I have a black MacBook dated 2008, a Time capsule also dated 2009 and a Canon multifunctional device model i-Sensys MF 4140.
The MF4140 worked great until now when connected via USB.
Now I want to print wireless with the help of my Time capsule, so I connected the MF4140 to Time capsule but it doesn't work. I can see it in System preferences/Print & fax/add via Bonjour but I cannot find the proper driver in Print using...
I already downloaded the proper driver from the official Canon software/driver download web page or I hope so...
I am going to get a new mac mini tomorow and i have a wonderful canon FS10.
Whenever I use it on my pc it is reading as .mov and i have heard from many that .mov is not read, and my cam is supossed to be reading as mpeg 2.
Has anyone got a work around for the Canon IPF500 printer.
I need to get this working, but waiting for new driver to be released from Canon.
Anyone know any temporary fixes?
So last year i purchased a new mac book, with my laptop I received a Canon iP4500 printer. I have had no need for it until now. I start the software installation, when its complete it asks to align the printer heads, this is where the problem arises. My printer is on, but since the printer doesn't connect via USB. The printer setup program searches via bluetooth, but every time the printer never shows up. Am I doing something wrong with the computer or the printer.
View 3 Replies View Related