I have installed the Canon MP380 printer driver for my new imac but I cannot find it listed under the Canon model name in Printer Setup. All I see are "gimp beta" this or that. When I try to print the text is too small. It's not filling up the standard size piece of paper I am printing on. What am I doing wrong here??? This is very confusing.
View 4 RepliesI would like to use a perfectly good Canon Pixma ip4200 printer with OSX Mountain Lion 10.8.5 and Yosemite 10.10.1 on my 2013 model iMac but Canon say they do not do a driver for these more recent versions of OSX later than 10.7. Is there any way to get this to work?
View 1 Replies View RelatedI was having problems printing from my Canon LBP6000. Print jobs remained held in the queue. I uninstalled and reinstalled the Mac CAPT Ve r340 driver from Canon's website, no improvement. The printer works fine with my Windows laptop. I found an option to remove all printers from the Print preferences section. I can't remember how I did this, but all printers were removed. I reinstalled the above driver, but now in the 'print & scan' - 'add printer' section, I have no printer options. And no idea how to get printer options.
Info:
Mac mini, Mac OS X (10.7.3)
I have a iphone with updated software. I want to print using my Wi-Fi canon pixmas mp640 but it tells me it cannot locate the printer
Info:
iPhone 4, updated operating system
I bought a Canon LBP3000 laser printer and I was told it would work on my iMac but it seems that this printer only works with a Japanese OS X and not on an English system. Does anybody have a driver for an English OS X?
View 1 Replies View RelatedHow to install Canon MP 810 printer driver?
Info:
iMac, Mac OS X (10.6.8)
My Canon MF8380 had been working fine with my MacBook Pro (printing wirelessly), and all of a sudden today I am getting an error that says: "Canon CMFP Printer Driver: Printer is not responding. Check the printer power and connection, and then try sending printing job again."
I have tried the basics - turning off and on the printer, rebooting the MacBook Pro, printing from different applications, making sure Job Accounting is not checked in setup, seeing that the driver seems like it's acknowledged, checking and unchecking sharing prefs.
Info:
Mac OS X (10.7.4)
I am trying to print from my iMac to a Canon SELPHY ES 1 using Gutenprint v5.2.3 driver and connected using a USB cable. The printer and Mac recognise each other but it doesn´t work.
Info:
iMac, Mac OS X (10.7.3)
I can't install a printer on my iMac. When I go through system prefs, add printer, it sees the printer and manages to make it to looking for installable options then that window just hangs. I can use the computer, but the window stays and it never actually installs the drivers, i'm using a wireless connection. The same thing happened before with a previous Epson printer connecting by USB. In the end I managed to connect it to my Macbook.
View 1 Replies View RelatedI had a Dell 1100 laser printer working on my iMac (G4 ball type) using a GIMP printer. I had to reset the queue and lost the driver. I can't remember which GIMP driver I used. Also, although I have loaded the latest GIMP s/w, I can't seem to get to them in Tiger 10.4.6.
View 24 Replies View RelatedI'm an IMac newbie, so please excuse me if this is "old" information. However, I've done a lot of searching and can't find a "simple" solution. Maybe there isn't one. Again, please excuse me if this is dumb...Just got a new 27" IMac. I have a Dell AIO 966. I know now there is no OEM driver. But, I thought there was a Lexmark driver model (that might show up in the OX 10 install process I could substitute, or a Generic driver. So far, no luck. And frankly, some of the things I am reading when I search are either old, old posts or too complex for me.
Is the simple answer, "get a new printer?" Or, is there a usable driver loaded into OS X? Is there a thread or post that I am missing?
I have 2 new I-Mac computers set up on a home network. I have my new Canon D480 Multifunction printer connected to one of the Macs ("Mac #1) by USB and it prints perfectly with the driver recommended in the printer manual downloaded from the Canon site. I have Printer sharing turned on. The printer's name on Mac #1 is Canon D460-490 (UFRII LT) which is the name that was automatically given to the printer when I downloaded the drivers and installed them.
However I am unable to print to the printer from the second new Mac ("Mac #2") although I have downloaded the same printer driver and have added the printer on Mac #2. The printer's name on Mac #2 is Canon D460-490 (UFRII LT) @ Mac #1.I go through the motions of File, Print, but nothing happens.
Canon advertises this printer as having ONLY Windows drivers, however there is a solution if you are interested in buying the printer (I bought one for around AUD150, delivered in Melbourne). As reported in Macosxhints here there is an OSX driver for the Canon LBP3000. Go to the linked Canon page (which is in Japanese) then scroll to near the bottom of the page for links to the driver (MXCAPT160). Download that and install it. Edit: The printer dialogue (when you attach it) is then in English. It doesn't offer all the options available in Windows (mainly output quality & economy modes) but is fine for straightforward printing to A4, letter, legal, A5, A6 and a couple of Japanese envelope sizes (Yougata-4 approximates DL).
View 6 Replies View RelatedI purchased that today, although the clerk knew that I use a mac he gave me no warning. in an older threat I read that it works with a file named cncupslbp2900captk.ppd.
View 7 Replies View RelatedI got a used printer Canon BJC-85 and realise with my very limited knowledge that it does not have the correct/updated version of driver for my iBook G4. It only mentions PowerMac G3 in the installation instructions. A friend told me that you can download the appropriate version for my laptop from the internet, but I don't know how to do this. Could you give me any advice about how to do this?
View 2 Replies View RelatedI recently obtained a 2013 Macbook air 13" and upgraded the os to Yosemite. I plugged in my travel printer, Canon BJC-85 and there is no driver compatible. The mac recognized it as plugged in but under the list of available installed drivers there is nothing that will work with it.
I tried to do a software update but it says my system is already up to date. I went to the canon website and it said mac OS X already has the drivers.
I used this printer on another mac OS X laptop and it had the drivers already like it should.
Info:
MacBook Air (13-inch Mid 2013), OS X Yosemite (10.10.1)
I have Canon CanoScan LIDE 50 and I do not know how to get it work. I have downloaded and installed the latest driver from Canon official webpage, and I also have downloaded and installed CanoScan Toolbox 5.0, but still it wont work.
View 4 Replies View RelatedWhat is the best driver for lion for canon mp530? My scangear goes into rainbow-whirligig action when I try to scan.
Info:
MacBookPro, Mac OS X (10.7.3), canon mp530 printer
I just purchased a Time Capsule for my Mac, and now I am able to hook up a Canon laser printer directly to it. My Mac recognizes the printer connected to the Time Capsule, but keeps aksing me to "Choose a Driver or Printer Model" when I am setting it up. I have downloaded the Canon print driver from the Canon website and I can find the Canon folder on my hard drive. However, it seems that I can't fine the actual driver.
Info:
iMac, Mac OS X (10.7.3)
Am having challenges finding a driver that works on mac (using Mac OS X version 10.7.4)
Info:
MacBook Pro, Mac OS X (10.7.4)
I bought i Canon Selbhy CP800 Printer.There is no running driver also not from the cannon Home Page to find.
Info:iMac, Mac OS X (10.7.4), Canon Homepage driver is not possib
I just downloaded and installed the new Canon drivers from their website that are supposed to support Scanner/Printer functions for my MX870 with Yosemite, but when I go to Settings for Printer/Scanner and try to add the printer from the wireless network, the computer does not detect it.
Info:
iMac (21.5-inch, Late 2013), OS X Yosemite (10.10.1)
I am unable to install a software driver for a Canon film scanner FS4000US. I have downloaded it from Canon then open the package click the install and it asks for a location namely the Applications folder. Then it says it has been installed re -start etc, but still no driver.I am using Mac OS 10.6. Any suggestions greatly received. I have repaired/disk and permissions and it still does not work.
Info:
iMac, Mac OS X (10.6.7)
My MacBook Pro is unable to locate HP Photosmart Premium eAll-in-One on the network... Wirelss printing cannot work.
Info:
MacBook Pro, Mac OS X (10.7.4)
I am using a Canon MP620 all in one with my MacPowerbook running Leopard 10.5.8. My Canon software is MP Navigator 1.05. The printer is agonizely slow. Sometimes after I press the print button it can take over a minute to even start. This not only occurs when I first start up but after the printer has been in use. This occurs when printing black and white text or pictures. I have been going through a hub and have not yet tried a direct connect which I will shortly. Anyone got any ideas or is this just a slow printer?
View 2 Replies View RelatedProblem: Canon MP560 printer won't print from 2008 Macbook Pro 10.6.5. It is recognized, I can print a sample page from the printer utility, but InDesign CS5, Acrobat Pro, Word 2011, text edit, Firefox, etc won't print to it. I'm not sure what caused this to start happening, as I've had this printer for almost a year. It is recognized on both USB and WIFI, yet neither connection works.
View 1 Replies View RelatedHas anyone got a work around for the Canon IPF500 printer.
I need to get this working, but waiting for new driver to be released from Canon.
Anyone know any temporary fixes?
After hours on the phone with Canon support, they told me it was a MAC problem. I have a new Canon Pixma MX860 printer..
First , Downloaded drivers from the Canon website with their support phone person helping set it up. Printer worked wirelessly with the MAC for 2 days. Then gone. Printer no longer on printer list and won't print either by USB or wirelessly. Called Canon support.
He guided me thru reinstalling in different ways, repaired permissions, set up additional acct name, but still the printer in not listed on Printer Browser screen when wireless used (it is listed when USB connected, but cannot print)and not listed at all on Print & Fax screen. My MAC doesn't recognize the printer now. What happened?
Here today , gone tomorrow. And nothing was downloaded , updated, or anything added or done to the computer from one day to the next. It is a huge mystery.
Did a disk utility 1st aid days before...nothing needed repair...Did the 1st aid, due to slowness starting, downloading from cameras very slow, and message "start up disk is almost full", which it is NOT ...46GB available.
I can print wireless but I can not scan wireless. Why? I am connected by wire from the canon 490 direct to my airport so why is it the scanner will not work? Can anyone explain ?
View 4 Replies View RelatedI've downloaded the Canon drivers to my MacBook. Now what? How do I actually install the particular printer so that it shows up on a print menu?
View 5 Replies View Related