I've just moved from Windows 7 to a new iMac, and nearly everything has been smooth with the transfer - except my scanner.Â
I have a Canon LiDE 30 which works perfectly well with my Windows box but does nothing at all when I plug it into the iMac. I've not loaded anything like the Canon scanner toolbox, and I can't find anything relevant on a search apart fromn some pre-Lion stuff. I don't know enough yet about my iMac to fiddle
I am getting nowhere with installing the Canon LiDE 210 scanner software on my 2010 MBP. All I get when I try to scan is "insufficient memory". I can scan using Image Capture and with the trial VueScan software so the problem looks as if it is something to do with the Canon software or the way that it installs on the MBP.
Info:
Canon LiDE 210, Mac OS X (10.7.4)
I have Canon CanoScan LIDE 50 and I do not know how to get it work. I have downloaded and installed the latest driver from Canon official webpage, and I also have downloaded and installed CanoScan Toolbox 5.0, but still it wont work.
View 4 Replies View RelatedMy LiDE 210 scanner which has worked in the past using OSX10.7 but it now says "insufficient memory" each time I launch MP Navigator EX 4.0. open MP Navigator and select 'View and Use', where it says 'Specify the scanned location', select a different scanner location to see if this resolves the issue. I am unable to do this as I get the "insufficient memory" message immediately I double click on the Canon software. If this did not resolve the issue, they recommended uninstalling and re-installing the latest drivers, which I have done but with no solution to the problem. I haved repaired permissions, checked printers in the library and there does not seem to be anything missing or conflicting. I cannot find any reference to TWAIN in the Library and finally the basic scanner functions are available using Image Capture.Â
Info:
MacBook Pro, Mac OS X (10.7.4), Canon LiDE 210
I've downloaded a driver from Canon, and at someone else's suggetsion, a Canon toolbox, but:Â My Canon Scanner LIDE 600f won't work on my Mac Lion.
View 2 Replies View RelatedI have done a search forwith a Canonscan Lide 30, but i haven't found anything. I need to set this unit up to scan some pictures; ect. Can anyone point me in the wright direction, or should i just get a new scanner.
I have an Imac 24 inch with 10.6.2 software, installed. Two gig of ram.
I have my partner's CanoScan LIDE 100 scanner and was wondering if I could download the software onto my MacBook Pro. He was strictly a pc user and I don't know if this scanner only works with pc's. I tried a download from CNET but only got one of those txt downloads rather than the actual software.
View 7 Replies View RelatedI have a canon MX870 and a new iMac running Lion. Printer works great, but won't send or receive faxes.
Info:
iMac
Why won't 10.6.8 recognize the canon xha1 video camera
Info:
iMac, Mac OS X (10.6.8)
My boss inherited an iMac. It connects to his wireless network and will print a test page, but will not print anything else. He is running Snow Leopard.
Info:IMAC, Mac OS X (10.5.4)
I cannot upload photos from my Canon EOS. Are there any downloads or softwares that might help.?
View 1 Replies View RelatedInstalling a new Canon 5350 on a new iMac, I have gone through the routine suggested in Apple support, of not installing the canon driver directly, but letting the iMac find the driver, update etc.  Then tried removing the 5350 from the printer driver pane and putting it back again. The result is that the printer will print wirelessly, but when I ask it to scan (from the iMac,) it suggests that either the printer/scanner is not there, or the USB connection is not working. I am assuming that the scanner driver is not there, or not up to date.
Info:
iMac, Mac OS X (10.7.3)
I bouth upgrade to the CS5 and got CS6 but it looks taht my iMac 10.5.8 cannot install Ps Cs6 since its software is too old ( 10.5.8). Do I need new computer to do so cause I cannot find upgrade to my computer which is not that old ( I bouth it in Jan 2009). What can I do.
Info:
iMac, Mac OS X (10.5.8)
I have a Canon MP460 connected to my iMAC however I am unable to scan. I can print perfectly and would like the scan capability to work. How do I get the scan to work?Â
Info:
iMac
How do you import video/pictures from the Canon vixia to the Mac (Mac OS X 10. 5. 8.)
Info:
iMac, Mac OS X (10.5.8)
I just installed MAC OS LION after snow leopard and now I can't get the iMAC to communicate with my canon printer. I installed the canon drivers again but still no go.
View 2 Replies View RelatedI bought i Canon Selbhy CP800 Printer.There is no running driver also not from the cannon Home Page to find.
Info:iMac, Mac OS X (10.7.4), Canon Homepage driver is not possib
i would like to find a cable to go from my canon 60d camera to the firewire port. i have been to numerous places and they do not have it. i could not find it at canon as well.
Info:
imac, Mac OS X (10.5.8)
Every time I connect my Canon EOS 5D, my iMac, does not recognize it. What can I do to fix this? I will upgrade to OS X Mountain Lion.
Info:iMac, Mac OS X (10.7.4), Core i7, 8GB RAM, 1TB hard drive
I am trying to transfer my photo's from my Canon EOS 550D to my new 21.5" iMac but when I plug my camera into my computer, via USB chord, it just says "No camera found". I have installed the Mac compatible software onto my computer that came with my camera. This software included the following:Camera WindowCanon MOV DecoderCanon MOV EncoderDigital Photo ProfessionalEOS UtilityImage BrowserMovie Uploader for YouTubePhotoStitchPicture Style Editor
I am a Photography student and I am becoming very frustrated with the fact I can't do anything with my photo's as I bought the iMac soley for Photography and Music.Â
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.2)
I have my Canon GL2 connected to my I-Mac OSX version10.7.3 with a Belkin 800/400 9-pin to 4-pin firewire cable and the computer is not acknowledging the camera or firewire cable. Trying to get footage into Final Cut Pro 10 off mini dv tape.
Info:
iMac, Mac OS X (10.7.3), Final Cut Pro 10
I have just upgraded to OS mavericks. My Canon MP550 printer, scanner worked fine on the old Mac. However, with the new Mac the printer works but the scanner doesn't. What should I do to make it work?
Info:
iMac, OS X Mavericks (10.9.3)
i just purchased an iMac 2.66GHz Intel Core 2Duo (Snow Leopard 10.6.2) and I installed Canon Digital-Photo-Professional 3.7.3 (upgraded from Canon's website).I soon had big problems with the Canon Raw sw: after the start up of the application, every command I try to operate (even a simple click in the menu bar) makes the infamous coloured wheel to appear and I have to wait 10-15 seconds, and sometime more, for the command to be operated.I found on the Canon site this "cryptic" statement about the installation of DPP 3.7.3 on Snow Leopard: "Improvements to Mac OS 10.6 Compatibility Issues have been made, to fixes the following problems that occurred with Mac OS 10.6.
***This does not guarantee the software will work correctly in all Mac OS 10.6 environments.***"So what should this mean? Does it work or not?I also tried to go back installing DPP 3.4.1 but it's the same horrible story.I'd like to hear from people who is experiencing similar problems with the same configuration I have (Snow Leo and DPP).
I have installed canon image browser which causes my system to crash.
Info:
iMac, Mac OS X (10.7.3), processor 3.4GHz intel core i7
imac 27 will not go beyond grey screen, since re-installing Canon printer software. Printer was working ok before.
View 1 Replies View RelatedShared canon usb printer on Mac sends a linefeed but no data. I'm using Bonjour on the PC(Windows 7) and the printer shows up in the list. I can use the printer setup window on the PC which shows if the ink is low etc. When I print I hear the Mac's hard drive operate but it just sends a sheet of paper through without any printing on it.
Info:
iMac, Mac OS X (10.5.1), Wireless k'brd and mouse
I have just connected my Canon Pixma MG5270 to my iMac running OSX 10.7.3 via WiFi. Printing works great, and scanning from the desktop "Canon MP Navigator EX - MG 5200 series" V 4.0.3 application works like a dream. When I try to scan via the operations panel on the printer/scanner the following comes up - Set the PC to start scanning". This worked fine when connected directly via USB cable. I have searched the web and believe I have the correct settings, particuliarly in MP Navigator:Â
1. Main Menu -> One-click -> Start scanning by clicking the button (checked)
2. Main Menu -> One-click -> Preferences -> General -> Compress scanned images when transferring (checked) -> Change -> Network Device List (selected Canon MG 5200 series_xxxxxxxxx) -> Scan-from-Operation-Panel Settings -> Network Device List (selected Canon MG5200 series_xxxxxxx)Â I have restarted the iMac and printer and always with the same result.Â
Info:
iMac (21.5-inch Mid 2011)
I am unable to install a software driver for a Canon film scanner FS4000US. I have downloaded it from Canon then open the package click the install and it asks for a location namely the Applications folder. Then it says it has been installed re -start etc, but still no driver.I am using Mac OS 10.6. Any suggestions greatly received. I have repaired/disk and permissions and it still does not work.
Info:
iMac, Mac OS X (10.6.7)
I replaced my hard drive and cant get my canon mp490 printer to work. My timeline backup had old printer drivers but cant seem to find new printer.
Info:
iMac, Mac OS X (10.7.4)
This is not a Canon problem as other computers (PCs) detect the scanner and work fine. This was originally the easiest multi-function printer/scanner setup I ever did.The scanning is easy and worked fine for a couple of months, then several days ago it gave "scanner not available" message,tried deleting the scanner and then adding, now it will not detect the scanner ONLY the printer
Info:
iMac, Mac OS X (10.7.3)
