I can't seem to connect to the internet using my ethernet cable. I messed around with some of the ethernet settings but now forgot what was the default one. The strange thing is, when I go into windows mode, the ethernet cable works. its just in Mac OS mode it doesn't.
View 1 Replies
I'm running OSX 10.5.8 on a Macbook Pro, and today I've been unable to connect to the internet via ethernet or wi-fi, unless I'm in safe mode. Then everything seems to work as it should, which makes me believe that this is a software issue rather than a hardware problem. I've tried making a new account with administrator priveleges, but that doesn't solve my issue. Does anyone have any advice on how I can connect to the internet under my normal user account, rather than in safe mode? I should note that I won't be able to get my hands on my repair CD or perform a clean install of OSX because that stuff is at home, and I'm in college. Also, I'm at a university and don't have a router. I just use the campus-wide wi-fi. Finally, my roommate has no problem accessing the internet in our room via ethernet or wi-fi, but I do. Thanks for the help everyone.
View 5 Replies View RelatedI'm brand new to Mac. I just got a MacBook Pro, and I've been having some troubles connecting to the internet at home. I have a LinkSys WRT54GS router with Firmware Version: v1.50.9. I'm unable to access the internet through both ethernet and wireless. Concerning wireless, I have tried connecting using WEP, and have tried entering passcodes both with and without an "$" and "0x" preceding the 10 digit WEP passcode. I have also tried switching the encryption over to WPA2, and still nothing. I have even disabled the security to see if it's able to connect -- it's not. I had some error regarding not being able to find it's IP or something along those lines.
View 4 Replies View Relatedmy macbook air does not connect to the internet via ethernet anymore. I have changed cables etc but nothing. Wireless is fine.
View 2 Replies View RelatedI have an iMac 10,1 and am unable to connect it to the internet using an ethernet cable.
I have a more recent Mac Book and I just plugged in the ethernet cable to it, clicked the setting in Network settings, and I was connected.Â
On the iMac it keeps saying, diagnostics can't fix it etc..?
On the left panel in Diagnostics, Ethernet has a green light, Network Settings an orange light, and ISP a green light (internet and Server are Red).
I'm using Comcast cable, and they just say the settings should appear automatically on a Mac (which they apparently did on my Mac Book!)Â ...
I'm here at university and the wifi here sucks! it is so slow, it is working.However there is an ethernet port and I did connect to it this morning. But, this evening I tried connecting again and it wouldnt let me!At my university they require you to put in your student ID and pw in order for you to use the internet for both wi-fi and ethernet. But when i tried this evening it dint ask for my student ID or password. I went to settings and it did say that there was a connection and that "Ethernet has a self-assigned IP address and will not be able to connect to the Internet"
i dont understand how come now it isnt working. I aksed my classmate nextdoor if his internet port was working through the ethernet port he said it was.... i am not that tech savy so keep vocabulary to something simple lmaooo.
This has been happening ever since I bought my Mac. I have reset + configured my router SO many times already and nothing is working. Can anyone explain why this is happening and/or what can I do?
The router is a Linksys WRT54G. Mac is running 10.6.2.
I just installed the Home Edition of Windows XP (from 2002) via Boot Camp. I'm having trouble getting online in Windows. Most of the Internet options seem to revolve around modems, which I don't have. I use a router connected to my computer via Ethernet. There's also a wireless function, which I can use in a pinch.How would I get the Windows side to connect to the Internet via Ethernet? I don't intend to spend much time online on the Windows side (due to viruses), but I'd like to be able to go online if necessary.
View 2 Replies View RelatedI don't know what happened, but a connection that I use frequently has suddenly stopped working on my 4-year-old MacBook (10.5.8). I have tried some of the fixes suggested for wireless connection problems, but none have worked. I live in a place where wireless is not always a viable option, so I need my Ethernet connection...
Info:
MacBook, Mac OS X (10.5.8)
My father in law had a power failure at the house, and since then, he cannot connect to the internet via DSL Modem connected via ethernet cable. Being that he is 1000 miles away, I am trying to diagnose via phone. System Info: Imac 17", purchased new around 2006- Intel chip, running Tiger OS
Symptoms:
- Cannot connect via ethernet
- When searching system profiler, "Built-in Ethernet" shows up, but no MAC address
- In Network settings, he can see the various connection ports, but cannot check the box on "Built-in Ethernet" to turn the port on... won't let him.
- Wireless is not an option, I don't want to be 24/7 tech support
Diagnosis? I am thinking that the power surge may have fried the ethernet port on the motherboard.
Repair Solution: Planning on picking up the Apple USB Ethernet adapter. I know it doesn't have the correct drivers to run on Tiger, but found a driver online that claims it allows use of the usb adapter on Panther on up.
Questions - Does this sound like a fried ethernet port? Any other easy diagnostic tests I can do? Does the USB adapter sounds like a decent solution?
i can't connect to the internet via my ethernet cable, but this is a weird case. What's weird about it is that all my settings are O.K. (appletalk on and set to ethernet, tcp/ip set to ethernet, dhcp) and my iMac is recieving a 192 address, but it still can't connect to the internet. The dhcp settings are correct, because they are the same settings used on all my other devices (at least those that use internet anyway), and they all connect to the internet just fine. Whether via an ethernet cable, or Wi-Fi.
Info:
iMac, Mac OS 9.2.x
I have recently had to stop using my wireless router and connect directly from my modem to the WAN port on my computer. However, I can only achieve an internet connection when I direct connect into my PowerBook G4. When I try to connect into my iMac, I get nothing.
View 2 Replies View Relatedi've recently got the Ethernet adapter for MBA and I am still unable to connect to my home internet connection... It continues to give me a "self-assigned IP".
View 3 Replies View RelatedI just bought an airport extreme w/gigabit, and I'm wondering if it's possible to connect an ethernet switch to one of my pro's ethernet ports and have things like my xbox 360 and ps3 run off it, however, my mac pro would be connected to my airport extreme via 802.11n. is that possible?
View 3 Replies View RelatedI've an Internet key (settings requested: phone number/web address/primary DNS): I put only the first 2 because with the third one (needed to speed up the connection) it doesn't works. I put the primary DNS requested on MACUSBmodem (DNS page, on the left).
View 4 Replies View RelatedFor specific reasons, I needed to connect my Synology DS211 NAS to my iMac directly via its ethernet port. I discovered that if I share my wireless internet connection (coming from my cable modem/wireless router) from wireless to ethernet, then the NAS would get the IP stuff it needed to show up. did that, voila, NAS is acting like a glorified external hard drive. BUT, when I did that, I lost all internet connectivity on my iMac. Still have full wireless signal. preferences pane says I'm fully connected to my network with an IP address, but safari always fails to pull up any webpages, saying I'm not connected to the internet.As soon as turn off the ethernet PORT, it all starts working again. And to make it even crazier, I discovered that if I leave sharing my wireless internet via my ethernet port ON, but turn off the ethernet port (in pref pane), I can STILL access the NAS just like before. That makes no sense - I'm sharing my internet via a port I have turned off, but it works? Anyway, why would Iose my airport wireless internet connection when the ethernet port is on - configured manually?
Info:
eMac 1.25GHz & iMac Intel 2.0GHz Intel, Mac OS X (10.5.8), 80GB external FW, 1GB RAM, Superdrive(DL)
Does anyone know how to change the default cd/dvd-rom from the internal drive to an external drive on a Macbook OS X 10.4.11 (Tiger)? If not permanently, then for the time my computer is on (e.g., a button at start up)
My internal drive does not work and I want to install Windows XP on Parallels but it keeps looking for the cd on the internal drive. I tried making an .iso image of it and telling it where it is, but it still keeps looking for the internal cd drive.
It is on my home network which I have been using for months. I have made no changes to my router or network setting. Other devices will still connect to the wifi with no problem and I connect through the ethernet connection with no problem. I have disabled the wifi and restarted my computer with no luck.
Info:MacBook Pro, Mac OS X (10.6.4)
Is there any way to set a default folder view for all folders on the computer? It's a real pain having to change every new folder I create to the list view manually.
View 3 Replies View RelatedA half year ago I did a kind of menu bar mod, so the menu bar was black! Cool but, now I don't know how to set it to default (I already did research on google).
View 4 Replies View RelatedIs there a way to change the default in Text Edit to some thing other than RTF?
View 3 Replies View Relatedone time, i decided to view my documents in "two page continuous." now it always opens up in that mode no matter how many times i put it in single page continuous. how to set it on the mode i want?
View 3 Replies View RelatedBy default mp3 files ar opened by Quicktime so the only I can find to change this to my prefered player is to right click "get info" and change "open with" VLC. But this only changes that one file and not all mp3 files on the system.
View 2 Replies View RelatedI recently used bootcamp to install windows 7 onto my computer. Now whenever i turn on my computer it defaults into windows. How do i change that??
View 3 Replies View RelatedI normally have my MBP on full (or mostly full) volume, but when I plug in headphones, I drop it down to the absolute lowest (or one up from that) level. Anything higher than that is deafening with my headphones. Normally my MBP automatically dropped it down to about that level whenever I plugged in headphones, but recently its only been dropping it down to the halfway point. This causes momentary deafness as I hit play on my iTunes, forgetting its only halfway down, and additional deafness from the clicking as I frantically hit Fn-F4 to lower the volume. Is there a way I can set the default level that OS X drops the volume to when I plug in my headphones?
View 4 Replies View RelatedI want to change to Google as the default search engine in Safari. In terminal, when I input "vi," this is what I get...
None of the 3 comments on the terminal screen make sense, although I did tried all 3.
I have a macbook and a screen plugget to it. Now I use just the new screen and don't use the macbook one. But every time I turn the mac on the macbook screen turns on, and I have to decrease the brightness manually every time. (cause it's a waste of energy to keep it on if I don't use it). So I'd like to know to set the screen brightness to 0 by default, so I don't have to turn the brightness down every time.
View 4 Replies View RelatedSomething recently changed with my system for opening movies.
Quicktime used to be the default player for opening movie files.
For some reason RealPlayer has become the default and I don't really like it.
I can't seem to find anywhere, either in Quicktime itself or System Preferences where i can set this default.
I installed the app Hear and i didnt like the sounds.. now all the sound of my mac seems like over eq..and higher bass etc.. i didnt like and and i couldnt turn to back to default settings..even if i remove the app... anyone has any idea how to turn to default sound setting on mac ??
View 1 Replies View RelatedI've looked all over; the only thing support can tell me is "it depends on what brand you buy." Anyways, I have a color laser printer. Works great, but most of the time I'm just printing materials off the internet and some documents for work. Therefore I do not need it to be printing in full blown color. Especially not for sites where the author decided to use dark purple or blue text (or some other color from which I can't tell from a glance that it's not black). Right now the only way to do this to manually go into the printing preferences each time to choose B&W only. Likewise, I also have to go and check the Duplex box manually. All this is very tedious when you have do it every time. Can anyone provide some insight into making this easier? Maybe how to set the default preferences so they can be used each time?
View 3 Replies View Related
