OS X Yosemite :: How To Connect To Internet Using Ethernet
Dec 7, 2014
I have an iMac 10,1 and am unable to connect it to the internet using an ethernet cable.
I have a more recent Mac Book and I just plugged in the ethernet cable to it, clicked the setting in Network settings, and I was connected.Â
On the iMac it keeps saying, diagnostics can't fix it etc..?
On the left panel in Diagnostics, Ethernet has a green light, Network Settings an orange light, and ISP a green light (internet and Server are Red).
I'm using Comcast cable, and they just say the settings should appear automatically on a Mac (which they apparently did on my Mac Book!)Â ...
View 8 Replies
ADVERTISEMENT
Jan 1, 2010
I'm running OSX 10.5.8 on a Macbook Pro, and today I've been unable to connect to the internet via ethernet or wi-fi, unless I'm in safe mode. Then everything seems to work as it should, which makes me believe that this is a software issue rather than a hardware problem. I've tried making a new account with administrator priveleges, but that doesn't solve my issue. Does anyone have any advice on how I can connect to the internet under my normal user account, rather than in safe mode? I should note that I won't be able to get my hands on my repair CD or perform a clean install of OSX because that stuff is at home, and I'm in college. Also, I'm at a university and don't have a router. I just use the campus-wide wi-fi. Finally, my roommate has no problem accessing the internet in our room via ethernet or wi-fi, but I do. Thanks for the help everyone.
View 5 Replies
View Related
Oct 1, 2009
I'm brand new to Mac. I just got a MacBook Pro, and I've been having some troubles connecting to the internet at home. I have a LinkSys WRT54GS router with Firmware Version: v1.50.9. I'm unable to access the internet through both ethernet and wireless. Concerning wireless, I have tried connecting using WEP, and have tried entering passcodes both with and without an "$" and "0x" preceding the 10 digit WEP passcode. I have also tried switching the encryption over to WPA2, and still nothing. I have even disabled the security to see if it's able to connect -- it's not. I had some error regarding not being able to find it's IP or something along those lines.
View 4 Replies
View Related
Mar 17, 2012
my macbook air does not connect to the internet via ethernet anymore. I have changed cables etc but nothing. Wireless is fine.
View 2 Replies
View Related
Oct 12, 2010
I'm here at university and the wifi here sucks! it is so slow, it is working.However there is an ethernet port and I did connect to it this morning. But, this evening I tried connecting again and it wouldnt let me!At my university they require you to put in your student ID and pw in order for you to use the internet for both wi-fi and ethernet. But when i tried this evening it dint ask for my student ID or password. I went to settings and it did say that there was a connection and that "Ethernet has a self-assigned IP address and will not be able to connect to the Internet"
i dont understand how come now it isnt working. I aksed my classmate nextdoor if his internet port was working through the ethernet port he said it was.... i am not that tech savy so keep vocabulary to something simple lmaooo.
View 4 Replies
View Related
Feb 21, 2010
This has been happening ever since I bought my Mac. I have reset + configured my router SO many times already and nothing is working. Can anyone explain why this is happening and/or what can I do?
The router is a Linksys WRT54G. Mac is running 10.6.2.
View 2 Replies
View Related
Apr 29, 2010
I can't seem to connect to the internet using my ethernet cable. I messed around with some of the ethernet settings but now forgot what was the default one. The strange thing is, when I go into windows mode, the ethernet cable works. its just in Mac OS mode it doesn't.
View 1 Replies
View Related
Aug 13, 2010
I just installed the Home Edition of Windows XP (from 2002) via Boot Camp. I'm having trouble getting online in Windows. Most of the Internet options seem to revolve around modems, which I don't have. I use a router connected to my computer via Ethernet. There's also a wireless function, which I can use in a pinch.How would I get the Windows side to connect to the Internet via Ethernet? I don't intend to spend much time online on the Windows side (due to viruses), but I'd like to be able to go online if necessary.
View 2 Replies
View Related
Jun 4, 2012
I don't know what happened, but a connection that I use frequently has suddenly stopped working on my 4-year-old MacBook (10.5.8). I have tried some of the fixes suggested for wireless connection problems, but none have worked. I live in a place where wireless is not always a viable option, so I need my Ethernet connection...
Info:
MacBook, Mac OS X (10.5.8)
View 1 Replies
View Related
Jun 8, 2010
My father in law had a power failure at the house, and since then, he cannot connect to the internet via DSL Modem connected via ethernet cable. Being that he is 1000 miles away, I am trying to diagnose via phone. System Info: Imac 17", purchased new around 2006- Intel chip, running Tiger OS
Symptoms:
- Cannot connect via ethernet
- When searching system profiler, "Built-in Ethernet" shows up, but no MAC address
- In Network settings, he can see the various connection ports, but cannot check the box on "Built-in Ethernet" to turn the port on... won't let him.
- Wireless is not an option, I don't want to be 24/7 tech support
Diagnosis? I am thinking that the power surge may have fried the ethernet port on the motherboard.
Repair Solution: Planning on picking up the Apple USB Ethernet adapter. I know it doesn't have the correct drivers to run on Tiger, but found a driver online that claims it allows use of the usb adapter on Panther on up.
Questions - Does this sound like a fried ethernet port? Any other easy diagnostic tests I can do? Does the USB adapter sounds like a decent solution?
View 1 Replies
View Related
Apr 6, 2012
i can't connect to the internet via my ethernet cable, but this is a weird case. What's weird about it is that all my settings are O.K. (appletalk on and set to ethernet, tcp/ip set to ethernet, dhcp) and my iMac is recieving a 192 address, but it still can't connect to the internet. The dhcp settings are correct, because they are the same settings used on all my other devices (at least those that use internet anyway), and they all connect to the internet just fine. Whether via an ethernet cable, or Wi-Fi.
Info:
iMac, Mac OS 9.2.x
View 14 Replies
View Related
Sep 8, 2010
I have recently had to stop using my wireless router and connect directly from my modem to the WAN port on my computer. However, I can only achieve an internet connection when I direct connect into my PowerBook G4. When I try to connect into my iMac, I get nothing.
View 2 Replies
View Related
Aug 3, 2008
i've recently got the Ethernet adapter for MBA and I am still unable to connect to my home internet connection... It continues to give me a "self-assigned IP".
View 3 Replies
View Related
Nov 2, 2008
I just bought an airport extreme w/gigabit, and I'm wondering if it's possible to connect an ethernet switch to one of my pro's ethernet ports and have things like my xbox 360 and ps3 run off it, however, my mac pro would be connected to my airport extreme via 802.11n. is that possible?
View 3 Replies
View Related
May 22, 2012
For specific reasons, I needed to connect my Synology DS211 NAS to my iMac directly via its ethernet port. I discovered that if I share my wireless internet connection (coming from my cable modem/wireless router) from wireless to ethernet, then the NAS would get the IP stuff it needed to show up. did that, voila, NAS is acting like a glorified external hard drive. BUT, when I did that, I lost all internet connectivity on my iMac. Still have full wireless signal. preferences pane says I'm fully connected to my network with an IP address, but safari always fails to pull up any webpages, saying I'm not connected to the internet.As soon as turn off the ethernet PORT, it all starts working again. And to make it even crazier, I discovered that if I leave sharing my wireless internet via my ethernet port ON, but turn off the ethernet port (in pref pane), I can STILL access the NAS just like before. That makes no sense - I'm sharing my internet via a port I have turned off, but it works? Anyway, why would Iose my airport wireless internet connection when the ethernet port is on - configured manually?
Info:
eMac 1.25GHz & iMac Intel 2.0GHz Intel, Mac OS X (10.5.8), 80GB external FW, 1GB RAM, Superdrive(DL)
View 1 Replies
View Related
Apr 22, 2012
It is on my home network which I have been using for months. I have made no changes to my router or network setting. Other devices will still connect to the wifi with no problem and I connect through the ethernet connection with no problem. I have disabled the wifi and restarted my computer with no luck.
Info:MacBook Pro, Mac OS X (10.6.4)
View 2 Replies
View Related
Dec 7, 2014
When I updated my mac from OX to Yosemite, I can't use my Ethernet adapter, do you know where I can get the drive for Yosemite?
Info:
MacBook Pro with Retina display, OS X Yosemite (10.10.1)
View 1 Replies
View Related
May 10, 2009
I have a macbook a little over a year old. It's my first mac and I love it. Yesterday though it started acting really weird. I first noticed that it was really, really hot and the fan was running. I turned it off and back on and here's what I found out:
Applications are being deleted from macbook. ITunes, IPhoto, iChat have clear question marks over icon. There are 8-10 blank spaces in the Applications folder where applications have been deleted. However, data is still there (ex. pictures still there, but no iPhoto).
Internet= Says I have internet but wont connect.
Cannot open " System Preferences" or "Internet Preferences".
If connected to home computer will connect to internet and allowed to open internet preferences but still no system preferences.
If shut down....takes a while to come back on and starts up 2-3 times.
Also "Preview" is gone. Now " ColorSync Utility" opens.
Is this my hard drive dying? I'm tech challenged, so any help would be greatly appreciated.
View 6 Replies
View Related
Dec 4, 2014
I have updated my 2009 imac to Yosemite but with my ethernet cable plugged in I cannot access the web. The wireless works when the cable is unplugged but no internet when I plug it in. The ethernet is shown as connected with an IP address etc when I check network preferences.
Info:
iMac, OS X Yosemite (10.10.1)
View 5 Replies
View Related
Dec 7, 2014
My network connection keeps switching to ethernet. When I open Network Utility, it shows the ethernet connected. I switch it to wifi and it keeps going back to ethernet.
Info:
MacBook Pro, OS X Yosemite (10.10)
View 1 Replies
View Related
May 29, 2012
currently I connect to the internet by doing this: Go to System Preferences / Network. Then I select my internet provider name on the left pane and finally click on the Connect button. That's all. This internet profile has a PPoE service name, an account name and a password. My internet connection uses a cable DLink router (it's not wireless).Â
Question:Â
1) Does the password I mentioned above mean that my neighbors can't access my internet, or are they able to do that and, in this case, I need to set another password somewhere else?Â
2) If I need another password, how and where do I set it,
Info:
Mac Book Pro, Mac OS X (10.6.6)
View 8 Replies
View Related
Dec 27, 2007
I have a blackbook (intel core 2 duo) and I can connect to my landlord's wireless network (they have a netgear wgt624) but I can't actually use the web (Safari or Firefox will just "think"). I've tested the diagnostics and it confirms that my mac can connect to the network, but it cannot connect to the internet. The network uses WPA personal and it has a 19-aphanumeric passphrase.
*Also - would it be possible for me to extend the wireless range (and make it possible to browse the web) if I used my own 2wire wireless modem to connect to the netgear wgt624?
View 10 Replies
View Related
Dec 10, 2010
So far I haven't been able to get an airport connected computer to share its connection via ethernet with another. Am I doing something wrong or is this not possible?
View 2 Replies
View Related
Sep 3, 2009
I currently have my mac connecting to a wireless network and have since plugged in a ethernet cable to use because I can get a better connection, but even with it plugged in I still seem to be connected to the wireless network How can I make it so its only using the ethernet connection?
View 1 Replies
View Related
Nov 23, 2009
I am sure this may have been asked before , but I am having a problem finding an answer. I have an iMac (2008) and my wife has a ACER E500 PC (No WiFi connection), running Windows XP Media Edition. The only internet connection we have is to my iMac, so as both my iMac and my wifes PC both have Ethernet connections , I am trying to share my iMac internet connection to my wifes PC via an Ethernet cable, I am having no luck in getting it working.
View 4 Replies
View Related
Apr 5, 2008
my PS3 and Mac are in my room, on the same desk, my wireless router is downstairs. The PS3 is getting a poor connection (40% signal) sometimes cutting out which makes it hard to download PS network stuff. My mac has a solid signal.What I want to do is connect my PS3 directly to my Mac using an ethernet cable. I just want to know how to get the PS3 to connect to the Macs connection through the wire. Apparently the PS3 needs to recognise the mac as a router?
View 13 Replies
View Related
May 11, 2012
I cannot connect to the internet, checked with my internet provider and that is OK, I think that something is wrong with my setting with my airport
View 2 Replies
View Related
Oct 11, 2010
2010 i7 15'' MBP. I've been connected to the internet wireless with my Airport Extreme from day 1, but today I wanted to give the ethernet port a try and it just didn't work. The ethernet cable is recognized, but it says there is no IP. I do not know my IP settings or any of that. What do I do?
View 2 Replies
View Related
Dec 27, 2010
ive successfully done this before with 10.5 and xp and am trying to replicate with 10.6 and win7.
my imac connects to internet via airport. i want to share that internet with a win7 box via ethernet cable. i've turned on internet sharing in sys prefs but to no avail.
View 5 Replies
View Related
Feb 12, 2007
Recently got a Mac pro. However my room only has one network socket going into my router, this goes to ethernet port 1. Internet works fine, no issues. However my old desktop (that the MP replaced) can't get online now - no second network port from the router into the room the computers are in. I have a crossover cable that I've used to connect the 2nd MP ethernet port to the PC ethernet port. However I can't get internet access on the PC. If the PC and port 2 are on their own subnet (not the router/port 1 subnet) I can get file sharing going between the MP & PC, but cannot figure out how to get the router/MP/PC on the same subnet together using both ethernet ports of the MP. I have already tried enabling internet sharing under system prefs etwork, but it doesnt work. Network: Router (connected to internet) at 192.168.1.1 - connected to mac MP port 1 - 192.168.1.2 - works fine in connecting to the net MP port 2 - 192.168.255.1 - works in networking to PC for filesharing PC - 192.168.255.2 - works in networking to Mac for filesharing Any combination of 192.168.1.xxx for the MP port 2 and PC, they can't fileshare anymore and there is still no internet for the PC. Anyone know how to do this?
View 17 Replies
View Related
