The story so far: Using the bluetooth wizard I have connected to my nokia 5800 and am able to browse etc. Now I want to tether the nokia and share my 3g connection with my MBP when on the move, so I went into bluetooth->advanced-> share and I am here:(see screenshot). Now which options do I select to tether it? Unfortunately I don't see my phone model there, does that mean somethings wrong?
View 9 Replies
What not sure what exact term is for the question box... but I'm trying to find out the keyboard shortcut to select the second option in a question box. [URL]. What's the keyboard shortcut to select "Add" rather than the highlighted "Don't Add?" Right arrow doesn't work, pressing "a" doesn't work, Tab doesn't work. What is it?
View 5 Replies View RelatedSo I was trying to install windows on my Imac using bootcamp, and everything seemed to be working fine. I put in my Windows CD and pressed continue, it then loaded me up to the windows installation page and it told me that I could not use the Bootcamp partition to put my windows OP on, because the partition needed to be NSF or something like that, so I highlighted the Bootcamp partition from the menu, and then clicked the partition button, after I had done that, it was then able to install windows on that partition. After the installation was complete, my Imac now only boots up the windows operating system without any option to what operating system to be booted. What do I do?
View 6 Replies View RelatedWith OS X 10.9.5 I do not see the select disk option in time machine. Is this normal ?
Info:
MacBook Pro
on my girlfriends computer when i select the option to allow password to be reset using apple id, it unchecks it self. i dont have this problem.
Info:
MacBook
Pro, Mac OS X (10.7.2)
I use a MacBook Pro and until today the sound worked fine. All of a sudden the sound doesn't work, having checked the sound settings there is no option to select internal speakers the only available option is 'Optical digital out port'.
Info:
MacBook Pro, Mac OS X (10.7.3)
I was wondering how to get the turbo boost option on the 2012 Retina Display Macbook Pro of 3.06ghz for the processer ?
Info:
MacBook Pro with Retina display
Last week I finally upgraded from 10.6 to 10.7, but now my Mac Pro (2008) won't boot properly. It'll start to boot with the gray screen and the Apple logo, but then the entire screen goes gray and it just locks up there. However, if I reboot and hold down the Option key to bring up the list of bootable drives that works fine. I've checked my Startup Drive settings and the proper drive is selected. why it won't boot on it's own anymore? Holding down the Option key is getting old.
Info:
Mac Pro - Octo Core, Mac OS X (10.5.6)
I'm tethering my phone (SE W705a) over USB using Apple's built-in functionality under Network Preferences. If I leave the APN field blank then I can connect and everything works, except for one app which requires a specific APN.
If I go into Advanced and enter the APN (direct.telecom.co.nz), then I'm unable to connect. I press Connect and it goes to Connecting, then after about two seconds swaps to Disconnecting then tells me that there was a modem error. On the phone itself I can see that it didn't even attempt to connect.
This used to work, but there are two things I can think of that may have stopped it: I updated to OS 10.6.2 (from 10.6.1), and I updated the phone firmware to the latest version. I'm not sure exactly when the issue occurred though, as I haven't needed to tether in over a month.
I want to know how to use bluetooth to connect my Gf's MBP to my mini, so that she may have an internet connection. Can't figure out how to get the settings right.
View 1 Replies View RelatedDoes anyone know of a Windows Mobile USB Driver that would allow me to tether my HTC Kaiser to my MacBook Pro via USB? I've been tethering via Bluetooth and that works fine, but doing it this way runs the battery down on my HTC quite fast, especially with HSDPA active. Also, it would allow me to keep the Macbook Pro plugged in and have the phone charged/charging via the USB connection, so that I don't kill the battery on the phone. I'm sure I'm not hte only Windows Mobile user here and I'm hoping someone else has found a solution.
View 10 Replies View RelatedDoes anybody know a way of tethering an LG Shine to a Macbook Pro? They both have Bluetooth and I just know there has to be a way to do it. I am completely lost on finding anything on the internet
View 8 Replies View RelatedI recently bought an iPhone 4S and b4 that I got a 3GS.The problem is I cannot connect my iPhone to my mac for USB tethering.Synchronization is just fine with iTune and I can also tether through wireless as well.Just that i cannot tether through USB.
Info:
iPhone 4S, iOS 5.1
So I have a Samsung Synch A707 on Cingular (personal line) and I have a Blackberry Pearl 8100 on Tmobile (work line).
I have successfully tethered both of them via bluetooth on my Macbook.
However, it seems to be quite a pain to switch between the two.
Unless I am missing something, I have to actually walk through the configuration wizard for configuring/adding a bluetooth device. Granted, all the settings are there, but it still seems like this could be easier.
After I do that, then I open up 'internet connect' where I have created separate configs for each phone/provider.
I also tried to create a separate location in the 'Network' setting (in the system preferences), however, it seems to default to the phone I used last.
I'm having issues connecting to the internet through tethering with my Moto Q and my Macbook that runs 10.5. I haven't had the need for the tethering option for sometime now and not until today I realized that it doesn't seem to work quite the same way it used to with 10.4.
The first time I tried it worked just fine; the phone was recognized by the VZ Connection Manager (for those who are not familiar with it, it's the software that allows you to get on the internet through the phone) and a connection was established correctly. What I didn't realized is that the phone had crashed during the process (the Moto Q runs Windows Mobile and it crashes the same a PC would ), even thou it showed a healthy connection. So, I restart the phone and try again. This time things didn't go as planned: the phone is no longer recognized by the Manager (even after repairing the phone several times with the compy.)
I think I'm missing something but I can't get a good grasp of it. I've checked the config many times and I don't seem to find the problem. Any one else having issues with this as well?
USB Tethering stop working (while WiFi and Bluetooth tethering continue to be ok) on Mac 10.6.8 (Snow Leopard fully updated) after my iPhone device has been updated from iOS 5.0.1 to 5.1.The present issue is not related to the iPhone (Personal Hotspot ok, Carrier/APN settings ok). Moreover, USB layer seems to be ok on Mac also due to the fact that iTunes recognizes it correctly. Network Services on Mac are instead affected. Steps to Reproduce:1. Remove 'iPhone device' from Network Preferences;2. Connect iPhone via USB cable to the Mac;3. A new 'iPhone device' does not appears while the /var/log/kernel.log says:[DGMTP_Drv.cpp][probe()][00103][ERRO] Current vid (0x05ac) and expected vid (0x04e8) is not matched Other interesting information preceding the mentioned above error on kernel.log are:kxld[com.apple.driver.AppleUSBEthernetHost]: The super class vtable '__ZTV20IOEthernetController' for vtable '__ZTV20AppleUSBEthernetHost' is out of date. Make sure your kext has been built against the correct headers.Mar 13 15:08:25 carlo kernel[0]: Can't load kext com.apple.driver.AppleUSBEthernetHost - link failed.Mar 13 15:08:25 carlo kernel[0]: Failed to load executable for kext com.apple.driver.AppleUSBEthernetHost.Mar 13 15:08:25 carlo kernel[0]: Kext com.apple.driver.AppleUSBEthernetHost failed to load (0xdc008016).Mar 13 15:08:25 carlo kernel[0]: Failed to load kext com.apple.driver.AppleUSBEthernetHost (error 0xdc008016).
Info:
Mac Book Pro 15''
After clicking System Preference how do I get SCAN option to appear so documents can be scanned? Currently only the Print option is visible and having no problems with printing. Printer is a HP Laser Jet 300.
View 1 Replies View RelatedI ran my usual check on the mac drive via "Verify Disk" option. It came up with "needs repair"...etc., and told me to repair it. I did a command r during boot so I could do a repair, and the software told me "your mac drive seems to be ok"??? Some kind of glitch, or need I worry about it at all?
Info:
27' iMac 2.7 GHz Intel Core i5, Mac OS X (10.7.2), Sony VPCL116FX Intel Core 2 Quad 2.66GHz 6G Ram 64b Win7
If I select a group of jpegs in finder to open in preview, preview does not allow me to select all.When viewing the images in preview, I cannot selct all either by going to -edit -select all or a.This option is greyed out.when I need to print all the images, I have to p each image individually.Mac OS 10.4.11
-2.7 Ghz power PC G5
-2.5 GB DDR SDRam
Info:
PowerMac
When I download a file it automatically goes to my download folder, I DONT WANT THAT. How can I set it like on a PC to choose which folder it should download to...on a file by file basis?
View 4 Replies View RelatedI cannot tell OS X to boot into Windows, it only shows OS X and Network boot sources. However I can reboot and hold down Option to select Windows that way.
Anyway to get my Windows selection into the OS X Startup Disk?
After purchasing a movie from iTunes, I clicked on the film and it brought me to the movie's DVD menu.However, it will not allow me to select it to play.I can select the "chapters" option, but I cannot select any of the chapters.Essentially, it is stuck on the menu.
Info:
MacBook Pro, Mac OS X (10.7.3)
I have a few hundred books in my iTunes. Everytime I add more books they are by default added to all my devices. Is there a way to do a mass select or un-select in the book selection of iTunes. I normally only keep the current book I am reading on my device. You can select and un-selected in mass for the music just not the books which seems strange.
Info:
iOS 5.1
Track pad won't let me select anything.
Info:
MacBook Pro
I bought a new mac mini in july. The second day I installed a genuine copy of vista 32 bit. To switch to vista I hold down the alt option key when the mac is starting up. In a few seconds a gray screen will show up with two options: Mac and Windows. Now about 5 separate times, the mac froze at this screen after I selected one of the two, usually or all the time I believe I selected windows. I waited but in the end I was forced to force shut down the mac.
Just recently I got rid of vista and installed Windows 7 ultimate 64bit and it just did it again at that screen.
Why is it doing this and is this really bad for my mac, I had no other choice.
Sometimes, my wireless mouse loses all connectivity and its wiped out from the iMac's paired devices.
So I need to re-pair it but I can't do it easily when my mouse is not working.
So how do I get to the bluetooth menu and then click on "Set up New Device" all with the keyboard?
I've learned to move the mouse arrow with my keypad but how do I access the menu and button directly with keyboard shortcuts?
Is it possible to select certain items to empty from the trash? Or do I have to empty the whole can. My trash can is getting up there in size but I really don't want to delete all of the items.
View 18 Replies View RelatedI don't know where post this, but I'm getting since yesterday a weird behavior in OS X Snow Leopard.
I don't know if is related to XCode/iPhone SDK or what. Sometimes, with no apparent reason, the menu of the application become FULL white.
Then in the emulator I get distortions in controls (the edit not show characters when input, but the control are getting it).
Also I lost the Command-Z in the xcode editor. Other glitches are around but I don't remember it right now.
I have a white macbook MacBook2,1.
When I try to make a custom DVD using Toast, I am not able to see scenes to choose from, only file names on the DVD I want to choose from. How do I choose scenes?
View 3 Replies View RelatedIf I want to forward multiple messages from one email account to another in Apple Mail (an old account to a new one), how can I select multiple messages at once, yet send them separately? (As opposed to the default where it forwards it all as one giant message.)
View 6 Replies View Related
