OS X :: Stop Mac Reading Everything Click / Type?
Apr 15, 2009Basically the title... I must have pressed a button and now it reads everything that i read or click out loud. Does anyone know how I can turn it off?
View 2 RepliesBasically the title... I must have pressed a button and now it reads everything that i read or click out loud. Does anyone know how I can turn it off?
View 2 Repliesfor some random reason my computer decided to randomly started speaking everything i click, type, search, everything any one know how to stop this?Never-mind! Somehow i hit the key-bind that i didn't know i had, sorry for the post.
View 6 Replies View RelatedI turned on my uMBP today and took it over to my bed, and when I set it on my lap, there was a loud click noise (louder than the normal motion sensor click) and then a quiet clicking noise started up in the left corner. I took a look at the iStat reading and it said 0 rpm for the fan. I'm assuming that the fan just gave out. I took it in to an authorized service provider and he said that he is "concerned that it could be the hard drive." Does that makes sense to anyone? Regardless, it's well under warranty. But now I'm stuck using a crappy PC until I get it back and i'm already in withdrawal!
View 3 Replies View RelatedIs there a way to stop PDF's from opening inside of Safari? I figure there is some type of solution to this but I can't be bothered to figure it out myself as I have wasted too much too much time on it already.
View 11 Replies View Relatedgot an alert that the batteries were low on the wireless mouse on my 3 month old Imac. First notice, but I changed them immediately. Now, the bluetooth setup assistant is searching for it but can't find the mouse. it is on, batteries are new. just plugged in a usb mouse to get on the forum
View 2 Replies View RelatedI recently bought a Macbook Pro and it starts worrying me that it makes a 'click' sound.
It's done it all the time but now I start worrying whether or not it's normal. It doesn't do it all the time. It comes now and then. It's not loud.
I've tried to record it and you can hear it by clicking here.
how to stop tabs from opening every time you click some where on safari
View 4 Replies View RelatedHow do I stop a new page from opening each time I click on a link?
Info:
MacBook Air, Mac OS X (10.7.5)
I am Having some issues with Safari (I am using 4.0.5), if I open up a website the screen stays white like it normally does for a sec to load a web page but the loading icon keeps spinning and spinning and spinning....... until I click the "X" stop icon and reload the web page. As soon as I click the reload icon the webpage loads up instantly, it is getting really annoying and would be great if anyone has a fix. This doesn't happen all the time, but it does happen frequently and then be fine for a few web pages and then start up again.
View 3 Replies View RelatedI hate Flash. It?s crass, it?s loud, it?s obnoxious, and on a Mac it is a literal drag on the machine, sucking up the CPU and memory as if there?
View 1 Replies View RelatedMy workflow entails repetitive tasks that would be so much easier if I could set Leopard's (Safari's) default double-click functionality to select ALL text within the Google search box instead of having to use a triple-click. Does anyone know how to make this change to Leopard/Safari?
View 3 Replies View RelatedI had to dissassemble my wireless Mighty Mouse to clean it properly, as the trackball was unable to scroll up and down. As I had cleaned the trackball, I attached the two internal cables to their respective "slots" again and assembled the mouse.
Now my right button does the same as the left button (right click = left click). I tried dissassembling the mouse again, but I cannot see what I could have done wrong. After all, there are only two cables to attach and de-attach inside it.
I just bought a mighty mouse, happy as I was, plugged it in and started my ibook running OS X 10.3.9.I know the mighty mouse shouldn't have full functionality (as the software delivered with it is >10.4.2).The problem is that the right click doesn't work right. When I try to right click it sometimes takes the right click, sometimes takes it as a left click (which is extremely annoying in firefox or finder).
I have SteerMouse (I'm a windows/linux user too) installed but when I de�nstalled it the problem remained.
When I plugged the mighty mouse in my pc (at that time running windows) right click just worked.When using a cheap mouse (from pleomax) the right click on the ibook (with Steermouse installed) works all the time.
I find this al really confusing. Seems like it can't be the hardware because it works on windows, but it can't be the software because another mouse does work.
I noticed that when right clicking at the total right side near the "expose-button" (not a position my fingers lay naturally) right click works all the time. I don't hope this is normal?
I'll try and click on a link and nothing, then I click bookmrks in the menu bar, it works, then i can go back and be to click on the link and it'll work.
View 2 Replies View RelatedIs the right click noise supposed to sound different to the left click? Mine does, is that normal?
View 7 Replies View RelatedMy MBP has this issue every once in a while where I have to hold the power button and force shut down. Randomly the volume keys/brightness etc. stop working and i can't open apps or shut it down normally. Everything still works though (can still function in open applications) Anyone know what the problem is? It fixes when I force reset.
View 1 Replies View RelatedI recently installed a VPN.
The performance through the VPN is badly affected by the Airport scanning regularly; often the VPN hangs.
I have deleted the unnecessary wireless networks listed in the Advanced button under Network Preferences. However, the problem persists.
Can you advise how to either stop the scanning or stop it interfering with Internet connection?
so for some reason i cant click on my icons, u know the Macintosh HD and folders on desktop. Basically icant click on anything on the desktop and i cant drag anything to the desktop but i can drag things to the trash. everything else is clickable except anything on the desktop
View 3 Replies View RelatedWhenever I hit the right or up arrow key on my macbook, it does shift either right or up but it also type either the number "8" for the right arrow key or the number "9" for the up key. How do I get this to stop?
Info:
MacBook Pro, OS X Mavericks (10.9.3)
Ever since I ran Onyx last week, mds keeps reading from my harddrive at about 2mb/second.For example I've only had my computer open for a couple of hours and done very little, just some browsing, and Activity Monitor shows 7.52GB read and 6.44GB written
View 4 Replies View RelatedI'm selling my iMac so I bought a new external hard drive today. I formatted it to FAT32 so that I can transfer all my data from my Mac to my PC. So I moved all the stuff onto it and then when I connected the HD to my PC, it wouldn't come up. It comes up on the 'Safely Remove Hardware' thing but not in My Computer.
View 6 Replies View RelatedI just picked up this macbook refurbished that came with 1GB of ram. So I picked up 2 1GB sticks to replace the old ram. When I installed it I got a black screen. So I put one of the old(512MB) sticks back in and it booted up fine and read 1.5GB. So I ran a bunch of different combinations of new and old sticks to make sure that I did not have a bad piece of ram and all of them work fine, just not when I use 2 1GB sticks. I have to have one new and one old for it to work.
Info:
MacBook
Our dvd drive on our Power Mac 2x2.66 GHz Dual Core intel.The drive is an Optiarc dvd rw ad-717a: sometimes will not read inserted discs. These discs work ok when tried on our I mac. Other discs work fine. This has occurred with discs that have bee writen in the drive as well as supplied discs.
Info:
PowerMac, Mac OS X (10.6.8)
Is it possible in any way to read a Windows disk on a Mac...?
And vica-versa...? Any file system that works on both OS...?
I am able to access my PC-external drives via Parallell desktop and Windows XP on my Mac, but if possible I wouldnt like to open the XP at all at my Mac.
Transferring files from my PowerBook G4(1.5ghz/2gb Ram). I was using a flash drive for some stuff but I wanted to put some large video files on my external hard drive. I plugged in the Western Digital HD, 120Gb, but my powerbook would not read it. Is this because I originally used this hd on my pc? Or does the laptop not have enough juice to power the external?
View 2 Replies View RelatedMy macbook pro cd drive seems to be acting up. It doesn't like to read any of my burnt cd/dvd-r, but it reads 'proper' and blank DVDs just fine (by 'proper' i mean like DVD movies, Apple Tiger OSX dvd, and such).. The discs that it refuses to read are fine, no scratches or anything. It takes the disc in, spins and tries to read it for about 3 times and spits it out. I've tried using those DVD lens cleaner discs with brushes on them.. but they didn't help. I've also tried resetting my PRAM (and the other one where you hold the power button for 5 seconds while shut down), and that didn't help either.. If it matters, my superdrive details are: MATSHITA DVD-R UJ-857D: Firmware Revision:KCV9 My machine is bit over 2 years old, so it's no longer on warranty/AppleCare. Has anyone encountered this before?
View 10 Replies View Relatedmy mac keeps crashing and freezing and i was wondering why it does it constantly and its becoming really annoying here at 2 crash reports or panic log im new to mac >.<
View 3 Replies View RelatedJust bought Art Explosion 750,000 It read and installed disc 1, disc 2, 3 work. Won't read/recognize disc 4-5. Anybody tell why? I put the disc in the tray,nothing happens .I may hear a very faint sound like it's trying to start, then nothing. Sometimes it ejects it.
View 1 Replies View RelatedI am able to watch dvds on my Macbook Pro, but when I insert a CD with photos or music on it, it doesn't read it and says "you just inserted a blank CD".
ALSO, I'm not able to burn CD's.
Anyone know what the issue is and how to fix it?
I have Fusion installed on my Mac, and it's all updated and runs fine, and I'm trying to install a program off a Windows-only CD. The problem is the drive in my Mac doesn't seem to accept it. It just ticks a few times and spits the CD back out. Is there a way around this? I've already been high and low on the VMWare site and it appears the virtual machine is communicating with the CD drive just fine.
View 7 Replies View Related