I have Fusion installed on my Mac, and it's all updated and runs fine, and I'm trying to install a program off a Windows-only CD. The problem is the drive in my Mac doesn't seem to accept it. It just ticks a few times and spits the CD back out. Is there a way around this? I've already been high and low on the VMWare site and it appears the virtual machine is communicating with the CD drive just fine.
View 7 RepliesHow do you read a pages file on windows? also, how do you print a pages file in windows.
View 2 Replies View RelatedI have Windows XP installed on my iMac via Bootcamp. When I use the DVD Drive to copy data to my hard drive, the whole computer seems to go into slow motion.
I'm in Device Manager and under the Advanced Settings of my Primary IDE Channel, the Transfer Mode is set to PIO, which I hear it shouldn't be? Should changing this setting to "DMA if available" correct the slow transfer speeds?
I recently bought a MBP 13" and plan to install windows XP SP2 on it via bootcamp. However, I've just read a few articles online about not being able to write onto the HDD while using windows xp since the partition would be formatted in ntfs? Does that mean I wouldn't even be able to install programs on my windows xp in boot camp??
View 1 Replies View RelatedI am in the process of pulling the data off of my collection of floppy disks. A lot of them are the really ancient 800K kind so I am using a Mac Classic II running System 7.0.1 to access them. The process is going well but occasionally I've run across a PC formatted floppy that the Mac won't read. It just says: This disk is not a Macintosh diskette. Do you want to Initialize it? So how do I give my Classic the ability to access these PC format diskettes?
View 3 Replies View RelatedIs it possible in any way to read a Windows disk on a Mac...?
And vica-versa...? Any file system that works on both OS...?
I am able to access my PC-external drives via Parallell desktop and Windows XP on my Mac, but if possible I wouldnt like to open the XP at all at my Mac.
I annotate PDF's with Skim. If I save an annotated file and open it later with Skim on the same Mac, I can read the annotations with no problem. However:
1. If I send the file to my other Mac (same OS, same Skim version) I can no longer read the notes. This works both ways and it's not due to setting "Hide notes".
2. I cannot read the notes with Preview, is this normal?
I have numerous books in iTunes, some PDF files and others ePub files. When I double click on a PDF file book in iTunes, Preview on my MBP will open up allowing me to read it. However, when clicking an ePub file nothing happens. Nothing opens. And of course I'd like for something to open up allowing me to read it on my Mac.
I bring up this thread cause I remember not too long ago Pages allowed for ePub conversion, figuring at the very least Pages could/would open up. Anyone have any recommendations for my wanted outcome of wanting an ePub file from iTunes to open up on my Mac?
I need to convert mpg files to flv and 3gp. I can to the .mpg to .flv with iMovie, but problem is, iMovie doesn't read all my mpg files. Are there any free applications that do this? If not, what's a good one for a reasonable price?
View 4 Replies View RelatedI read e-books from time to time and am kind of tired of using the standard adobe acrobat.. does anyone know of or use a nice ebook reader? (ebooks are usually pdf format)
View 3 Replies View RelatedIs there a way to stop PDF's from opening inside of Safari? I figure there is some type of solution to this but I can't be bothered to figure it out myself as I have wasted too much too much time on it already.
View 11 Replies View RelatedI've recently made the move from a PC to a Mac, and so far, everything gone very smoothly. I got iWork with my Mac, and there is one problem that's bugging me; every time I open a word (docx) document in pages, it asks me if I want to keep the changes or discard them, and that is for when I am just reading them. When I edit them, and I go to save it, it keeps bringing up the save as box instead of overwriting the present docx file.
I've already installed any missing fonts I have in my documents. So, to summarize, my two main problems are: If I read a docx file, Pages acts like I made changes to it, despite the fact that I did not. If I edit a docx file, Pages keeps bringing up the save as dialog box when I try to save, instead of overwriting the original docx file. The same thing happens with Numbers and Keynote. I just need a temporary fix 'til I can get a hold of Office 2011.
When I'm trying to capture on my iMac using FCP7 through a Canon XL1 I get this message: "Capture encountered a problem reading the data on your source tape". Now I know it's not the tape as when I use my iBook to capture (fcp5) it's fine. I know I could use the iBook but I've been having problems with it in other forms so I can't rely on that working forwver and once/when it dies, I'll be stuck. I've tried all the usuals: rebooting, different cam to transfer, different cables, re-instaling FCP and I'm still scratching my head.
View 1 Replies View RelatedEver since I ran Onyx last week, mds keeps reading from my harddrive at about 2mb/second.For example I've only had my computer open for a couple of hours and done very little, just some browsing, and Activity Monitor shows 7.52GB read and 6.44GB written
View 4 Replies View RelatedI'm selling my iMac so I bought a new external hard drive today. I formatted it to FAT32 so that I can transfer all my data from my Mac to my PC. So I moved all the stuff onto it and then when I connected the HD to my PC, it wouldn't come up. It comes up on the 'Safely Remove Hardware' thing but not in My Computer.
View 6 Replies View RelatedI just picked up this macbook refurbished that came with 1GB of ram. So I picked up 2 1GB sticks to replace the old ram. When I installed it I got a black screen. So I put one of the old(512MB) sticks back in and it booted up fine and read 1.5GB. So I ran a bunch of different combinations of new and old sticks to make sure that I did not have a bad piece of ram and all of them work fine, just not when I use 2 1GB sticks. I have to have one new and one old for it to work.Â
Info:
MacBook
Our dvd drive on our Power Mac 2x2.66 GHz Dual Core intel.The drive is an Optiarc dvd rw ad-717a: sometimes will not read inserted discs. These discs work ok when tried on our I mac. Other discs work fine. This has occurred with discs that have bee writen in the drive as well as supplied discs.
Info:
PowerMac, Mac OS X (10.6.8)
Transferring files from my PowerBook G4(1.5ghz/2gb Ram). I was using a flash drive for some stuff but I wanted to put some large video files on my external hard drive. I plugged in the Western Digital HD, 120Gb, but my powerbook would not read it. Is this because I originally used this hd on my pc? Or does the laptop not have enough juice to power the external?
View 2 Replies View RelatedMy macbook pro cd drive seems to be acting up. It doesn't like to read any of my burnt cd/dvd-r, but it reads 'proper' and blank DVDs just fine (by 'proper' i mean like DVD movies, Apple Tiger OSX dvd, and such).. The discs that it refuses to read are fine, no scratches or anything. It takes the disc in, spins and tries to read it for about 3 times and spits it out. I've tried using those DVD lens cleaner discs with brushes on them.. but they didn't help. I've also tried resetting my PRAM (and the other one where you hold the power button for 5 seconds while shut down), and that didn't help either.. If it matters, my superdrive details are: MATSHITA DVD-R UJ-857D: Firmware Revision:KCV9 My machine is bit over 2 years old, so it's no longer on warranty/AppleCare. Has anyone encountered this before?
View 10 Replies View Relatedmy mac keeps crashing and freezing and i was wondering why it does it constantly and its becoming really annoying here at 2 crash reports or panic log im new to mac >.<
View 3 Replies View RelatedJust bought Art Explosion 750,000 It read and installed disc 1, disc 2, 3 work. Won't read/recognize disc 4-5. Anybody tell why? I put the disc in the tray,nothing happens .I may hear a very faint sound like it's trying to start, then nothing. Sometimes it ejects it.
View 1 Replies View RelatedI am able to watch dvds on my Macbook Pro, but when I insert a CD with photos or music on it, it doesn't read it and says "you just inserted a blank CD".
ALSO, I'm not able to burn CD's.
Anyone know what the issue is and how to fix it?
Bought a MacBook about a year and half ago and have had no issues until today. I have been able to burn numerous CD's and DVD's but for some reason today when I tried to burn a CD it keeps spitting the blank CD out. I doesn't seem to recognize any disk. When I put a disk in it makes a quiet noise like it's trying to read it but after a few seconds spits it out. No application seems to recognize any disk either.
View 5 Replies View RelatedI have a bunch of important .xml chatlogs from msn messenger that I need to read, but unfortunately I can't find any programme that will open them for me (nicely). Double clicking on the file opens a blank page in Safari, whereas opening it using TextEdit gives me a whole bunch of code which is really hard to sift through..
I downloaded firefox which lets me read the words in the chatlog without the codings and whatnot, but the words aren't arranged properly and it just appears as one whole chunk of text.
I have a Mac Desktop G5, and it isn't reading burned DVD+R's. The DVD's work fine in our normal DVD player, but it won't even show up on my desktop. I can hear it spinning in there like it's trying to read it, but it just gives up.
View 7 Replies View RelatedI noticed that my 320g macintosh HD is saying I have 298GB capacity, but I have 84GB available on the description on my desktop. If I select get info however in informs me I have 13GB available. I ran disk utility and it comes up that my HD appears to be o.k. Do I have a HD issue? Is there a way to fix this so it will read properly?
View 1 Replies View RelatedI have a 2009 Intel CPU MAC PRO 2.66 Quad Core OSX Lion that will not read a DVD unless I reboot. After a while it will do this again and then I reboot and it reads again.
View 2 Replies View RelatedSafari 5.1.4 running under Lion (10.7.3) and the previous Safari version on Snow Leopard alyway tries to open a pdf file using the Quicktime plugin. This results is a mostly unreadable document. The previous versions didn't do that. If I go to Library/Internet Plugins and remove Quicktime plugin.plugin Safari works as before.
Info:
MacBook Pro, Mac OS X (10.7.3)
My iMac won't read my SD card. Once I ejected the card it stopped reading SD cards. I updated my system and it read the card, but then once I ejected it it stopped reading cards again.
Info:
iMac (21.5-inch Mid 2010), Mac OS X (10.7.4)
Has anyone else had a problem with a DVD+R not reading in the DVD drive on the Mac?
Info:
iMac
