OS X :: Print Over Airport While Receiving Internet Through Ethernet?
Dec 2, 2008
So here is my problem: Originally I had an airport express set up to broadcast a wireless network. I had a printer plugged into the airport express. I also had an ethernet cord going into the airport express. When I was connected to the network, I could surf the internet just fine, and was able to set up the printer just fine as well. I then decided that I was not getting fast enough speeds wirelessly with my b/g airport express network, so I unplugged the ethernet cord from the airport express and connected it directly to my mac. With this setup I was able to surf the internet over ethernet, but even though I was connected to the airport express network I was not able to print. It would always give me errors... I read somewhere about how it looks at one service first or something... so I tried moving Airport to the top of the services in System Preferences, but that just made it so my internet didn't work. How can I print over the airport network and use the internet via ethernet at the same time?
View 2 Replies
ADVERTISEMENT
Dec 23, 2010
I have two comps
1 mac pro
1 mac book pro
the wireless printing to my laser printing is amazing with the MBP but the MP is hooked up to the base station via ethernet. How do I get the MP to see the exact same printer that is hooked up via USB.
View 1 Replies
View Related
Nov 3, 2009
My macbook is not letting internet through from ethernet or airport but when i boot up xp with bootcamp both work so the drivers must be fine, this problem might have something to do with when i turn the computer on it doesnt always start up it go to the gray screen with the spinning loading wheel but also it gets the loading bar which you can see for 30 sec till it gets about 1/32 of the way though the bar so not far at all and sometimes doesnt boot at all. I am running snow leopard and luckily used time mach.
View 2 Replies
View Related
Feb 21, 2010
This has been happening ever since I bought my Mac. I have reset + configured my router SO many times already and nothing is working. Can anyone explain why this is happening and/or what can I do?
The router is a Linksys WRT54G. Mac is running 10.6.2.
View 2 Replies
View Related
Mar 6, 2009
I have a 24" iMac that has completely all of a sudden stopped wanting to connect to the internet. However, my Macbook, connected to the same ethernet cord or wireless network, works flawlessly and has no trouble. The iMac will find the wireless network...show full bars...then drop a bar....then another bar, then another, until only the smallest bar is available. It will transfer data but only for a few seconds until it wont work at all. Now the macbook, sitting right next to the imac will show full bars and stay that way. So i tried a ethernet cable to the iMac and it will not even pull up 1 single page, but the same cable connected to my Macbook will work flawlessly.
View 3 Replies
View Related
Mar 24, 2009
I connect to the internet mainly through an ethernet cable, connected to my own base for ethernet connections (Might be a router, but doesn't connect directly to the internet) which is connected to the main Linksys router on the other side of my house, which even has a wireless connection.
Regardless, this setup has worked without issue for a long time now, but all of a sudden now, I cannot connect to the internet (On my Mac).
I have tried unplugging the routers, for extended periods of time, plugging them back in, but I cannot connect to the internet. Whats awkward, is that when I check the Network settings in the System Preferences, it says clearly is that the Ethernet Cable is connected (Which it is), and as a backup, I have even connected to my Wireless Network through AirPort (Which says it is connected), but I cannot connect to the internet through Firefox, or any instant messaging service.
On the main computer, with the main router, the internet works fine. When I try to load Firefox on my Mac, it sometimes takes a long time loading (On a blank screen), and never loads usually (With occasional loads, but usually does not connect).
View 1 Replies
View Related
Jan 1, 2010
I'm running OSX 10.5.8 on a Macbook Pro, and today I've been unable to connect to the internet via ethernet or wi-fi, unless I'm in safe mode. Then everything seems to work as it should, which makes me believe that this is a software issue rather than a hardware problem. I've tried making a new account with administrator priveleges, but that doesn't solve my issue. Does anyone have any advice on how I can connect to the internet under my normal user account, rather than in safe mode? I should note that I won't be able to get my hands on my repair CD or perform a clean install of OSX because that stuff is at home, and I'm in college. Also, I'm at a university and don't have a router. I just use the campus-wide wi-fi. Finally, my roommate has no problem accessing the internet in our room via ethernet or wi-fi, but I do. Thanks for the help everyone.
View 5 Replies
View Related
May 22, 2012
For specific reasons, I needed to connect my Synology DS211 NAS to my iMac directly via its ethernet port. I discovered that if I share my wireless internet connection (coming from my cable modem/wireless router) from wireless to ethernet, then the NAS would get the IP stuff it needed to show up. did that, voila, NAS is acting like a glorified external hard drive. BUT, when I did that, I lost all internet connectivity on my iMac. Still have full wireless signal. preferences pane says I'm fully connected to my network with an IP address, but safari always fails to pull up any webpages, saying I'm not connected to the internet.As soon as turn off the ethernet PORT, it all starts working again. And to make it even crazier, I discovered that if I leave sharing my wireless internet via my ethernet port ON, but turn off the ethernet port (in pref pane), I can STILL access the NAS just like before. That makes no sense - I'm sharing my internet via a port I have turned off, but it works? Anyway, why would Iose my airport wireless internet connection when the ethernet port is on - configured manually?
Info:
eMac 1.25GHz & iMac Intel 2.0GHz Intel, Mac OS X (10.5.8), 80GB external FW, 1GB RAM, Superdrive(DL)
View 1 Replies
View Related
Feb 6, 2012
Today, for some reason I can't print to our networked printer, a Kyocera FS-6950DN laser. All I am getting now is a 'Network host is busy, will retry in 10/15 secs' and the job just holds.Â
So, what have I tried. To eleminate any printer issues I have successful managed to print direct from my MacBook (also running OSX 10.6.8) without a problem. So the printer seems fine. However, if a connect directly (again via a single ethernet cable) to my MacPro it won't print. I have deleted the printer and created a new one. Actually, I have done this several times. When I go to create a new printer I can see the printer listed a a bonjour printer. I select it, then I use 'generic postcript'. I can choose the my printer here, but I seem to remember that this was a problem when I set it up originally and I was advised to use the generic option. I click add and that used to work. But not now. I have checked that the printer has a static ip address and it does. I have also tried adding the printer as an IP printer and adding the IP address etc maually, but again this doesn't work. I've tried this both with LPD set or IPP set. I get the same busy error message. Â
Trawling the net I have noticed lots of people with Kyocera print issues relating to the latest OSX Snow Leopard 10.6.8 update. Although having succesfully printed from my MacBook that would suggest that 10.6.8 isn't the issue in my case.Â
I should also say that I have done the usual... repaired the permissions and reset the PRAM etc. I have ping tested the connection from my MacPro and there is a response from the printer. It's just not finding the printer when I send the job to print?
Info:
MacBook Pro, Mac OS X (10.6.8), Kyocera FS-6950DN laser printer
View 2 Replies
View Related
Dec 10, 2010
So far I haven't been able to get an airport connected computer to share its connection via ethernet with another. Am I doing something wrong or is this not possible?
View 2 Replies
View Related
Sep 3, 2009
I currently have my mac connecting to a wireless network and have since plugged in a ethernet cable to use because I can get a better connection, but even with it plugged in I still seem to be connected to the wireless network How can I make it so its only using the ethernet connection?
View 1 Replies
View Related
Nov 23, 2009
I am sure this may have been asked before , but I am having a problem finding an answer. I have an iMac (2008) and my wife has a ACER E500 PC (No WiFi connection), running Windows XP Media Edition. The only internet connection we have is to my iMac, so as both my iMac and my wifes PC both have Ethernet connections , I am trying to share my iMac internet connection to my wifes PC via an Ethernet cable, I am having no luck in getting it working.
View 4 Replies
View Related
Oct 11, 2010
2010 i7 15'' MBP. I've been connected to the internet wireless with my Airport Extreme from day 1, but today I wanted to give the ethernet port a try and it just didn't work. The ethernet cable is recognized, but it says there is no IP. I do not know my IP settings or any of that. What do I do?
View 2 Replies
View Related
Dec 27, 2010
ive successfully done this before with 10.5 and xp and am trying to replicate with 10.6 and win7.
my imac connects to internet via airport. i want to share that internet with a win7 box via ethernet cable. i've turned on internet sharing in sys prefs but to no avail.
View 5 Replies
View Related
Feb 12, 2007
Recently got a Mac pro. However my room only has one network socket going into my router, this goes to ethernet port 1. Internet works fine, no issues. However my old desktop (that the MP replaced) can't get online now - no second network port from the router into the room the computers are in. I have a crossover cable that I've used to connect the 2nd MP ethernet port to the PC ethernet port. However I can't get internet access on the PC. If the PC and port 2 are on their own subnet (not the router/port 1 subnet) I can get file sharing going between the MP & PC, but cannot figure out how to get the router/MP/PC on the same subnet together using both ethernet ports of the MP. I have already tried enabling internet sharing under system prefs etwork, but it doesnt work. Network: Router (connected to internet) at 192.168.1.1 - connected to mac MP port 1 - 192.168.1.2 - works fine in connecting to the net MP port 2 - 192.168.255.1 - works in networking to PC for filesharing PC - 192.168.255.2 - works in networking to Mac for filesharing Any combination of 192.168.1.xxx for the MP port 2 and PC, they can't fileshare anymore and there is still no internet for the PC. Anyone know how to do this?
View 17 Replies
View Related
Sep 6, 2008
so basically this powermac g4 quick silver 733mhz is giving me big problems connecting to the internet, its got built in ethernet and modem, also a ethernet card, and wireless usb dlink thing. so i install the driver for the dlink usb thing driver works etc, it says its connected but wont go to a page apple.ca (safari), so then i put the ethernet cord in the ethernet card lights flashing then goess to apple.ca so how can i just get the internet to work using usb only and ethernet only? im assuming the built in thernet isnt working on a case of that theres a card there i might just reinstall tiger off a imac g5 since i rember the internet setup was so much easier, wait nvm about the off a imac g5
View 2 Replies
View Related
Apr 3, 2009
Ive got a pretty fast internet connection at home and I have just realised that when I plug my iBook and desktop pcs into my wireless router ethernet (LAN) ports I get a much faster internet connection speed compared to the wifi.I.e. 12-17mbps when through ethernet and when I connect to the wifi I get 2-4mbps. My computers are all located in the same room no more than 5 metres away from the router.
View 4 Replies
View Related
Oct 1, 2009
I'm brand new to Mac. I just got a MacBook Pro, and I've been having some troubles connecting to the internet at home. I have a LinkSys WRT54GS router with Firmware Version: v1.50.9. I'm unable to access the internet through both ethernet and wireless. Concerning wireless, I have tried connecting using WEP, and have tried entering passcodes both with and without an "$" and "0x" preceding the 10 digit WEP passcode. I have also tried switching the encryption over to WPA2, and still nothing. I have even disabled the security to see if it's able to connect -- it's not. I had some error regarding not being able to find it's IP or something along those lines.
View 4 Replies
View Related
Jan 18, 2010
I know the steps for internet sharing airport card's internet access to another computer via ethernet cable, but how do i set it up to share it with a router via ethernet cable?
View 1 Replies
View Related
Mar 17, 2012
my macbook air does not connect to the internet via ethernet anymore. I have changed cables etc but nothing. Wireless is fine.
View 2 Replies
View Related
Jun 6, 2012
I usually have all my computers, mac or pc, connected over Ethernet and only use Wifi for phones and guests. A while ago i started not to be able to connect to the internet anymore, although i hadn't changed anything on the mac or my router. I tired all possible troubleshooting routines to get to the bottom of it but with no success. Reset network ports in System prefs, Cocktail maintenance, Repairing disk and permissions booted from recovery partition, deleted SystemConfig files, reset the router to factory settings and reconfiguring, checked DHCP settings for ip conflicts, just nothing works.
I can connect to the internet over wifi without problems on the Macbook Pro.I can connect over ethernet to all other shared devices and computers on my network.When i run the Network Diagnostics with Ethernet as primary interface all lights are green and it says my connections are working but i cannot connect to any internet address, all pings time out with any port or protocol (ftp, mail, http, ssh)Other PC's and Macs can connect over ethernet to the internet without problems using the same cable.
Info:
MacBook Pro, Mac OS X (10.7.4), MID-2010 MBP 17"
View 1 Replies
View Related
Dec 7, 2014
I have an iMac 10,1 and am unable to connect it to the internet using an ethernet cable.
I have a more recent Mac Book and I just plugged in the ethernet cable to it, clicked the setting in Network settings, and I was connected.Â
On the iMac it keeps saying, diagnostics can't fix it etc..?
On the left panel in Diagnostics, Ethernet has a green light, Network Settings an orange light, and ISP a green light (internet and Server are Red).
I'm using Comcast cable, and they just say the settings should appear automatically on a Mac (which they apparently did on my Mac Book!)Â ...
View 8 Replies
View Related
Oct 18, 2010
"the AirPort Disk became available. what do you want to do?"
I typed my network and password.
View 2 Replies
View Related
Jun 18, 2009
Is it possible to use my airport connection on my mac to connect another device (xbox 360?) via ethernet?
View 2 Replies
View Related
Jan 7, 2010
I am attempting to set up a wireless network with an AirPort Express in order to access the Internet from my iPod touch. My computer is a 2002 PowerBook G4/667 running OS X 10.4.11 (the latest OS it can run), and according to an Apple Store Genus, either the AirPort card or the AirPort antenna is shot, rendering the PowerBook useless as a wireless device. Adding to the pain, my cable modem has only one Ethernet port. Hence, I have purchased a Belkin F5D5050 USB/Ethernet adapter (and installed USBPegasusEthernet 1.0.9 as a kernel extension to make it work).
Which I plan to use to connect the AirPort Express to the computer (via the Ethernet port on the Express and the USB port on the PowerBook). The modem would be connected via Ethernet directly to the PowerBook's sole Ethernet port. Everything I read on the Internet says that I should be able to configure the AirPort Express over Ethernet via AirPort Admin Utility, but the utility doesn't seem to see the Express, even if I directly connect them to each other (one Ethernet port to the other). How I could make my network operational?
View 3 Replies
View Related
Feb 10, 2010
I apparently have a unique situation. My ethernet connection, if that is what it even is, comes out of the wall. No connection, nothing like that, it just goes into the wall, and disappears. They told me on the phone it's a LAN. I have my IP, Subnet, default gateway, and DNS numbers. When I plug the cord into my computer, using the IP4 thing, it works fine. I have to put the numbers in myself, no big deal.
Then I plug my APE in, and go into the utility to try to set it up. I enter all of those numbers. But run into all kinds of problems. Vista has no probs connecting my comp up to the airport, but airport has probs getting onto the net. I have fiddled around for hours trying to enter the numbers differently, but with no luck.
View 1 Replies
View Related
Feb 17, 2010
you can share your eithernet connection through the airport but can you do it the other way.Basically i have a mac in my room and also a PC, i want to be able to plug a cable from my PC to my iMac and then browse the internet using my iMacs airport connect to my wireless router downstairs.
View 3 Replies
View Related
Apr 21, 2010
I'm trying to setup internet sharing on a 24" intel imac running the latest 10.6.
We are trying to share an ethernet connection over airport, however I cant seem to get airport to appear in the 'to computers using' list.
View 1 Replies
View Related
Oct 12, 2010
I'm here at university and the wifi here sucks! it is so slow, it is working.However there is an ethernet port and I did connect to it this morning. But, this evening I tried connecting again and it wouldnt let me!At my university they require you to put in your student ID and pw in order for you to use the internet for both wi-fi and ethernet. But when i tried this evening it dint ask for my student ID or password. I went to settings and it did say that there was a connection and that "Ethernet has a self-assigned IP address and will not be able to connect to the Internet"
i dont understand how come now it isnt working. I aksed my classmate nextdoor if his internet port was working through the ethernet port he said it was.... i am not that tech savy so keep vocabulary to something simple lmaooo.
View 4 Replies
View Related
Dec 17, 2010
tried using an ethernet to USB adaptor. I saw one at Fry's for $20. I normally do not have need for ethernet but one hotel I have stayed at seems to only have an in room ethernet connection to get on line.Would I notice any difference between an adaptor that supports USB 2 vs USB 1 while surfing the internet?
View 2 Replies
View Related
