I currently have my mac connecting to a wireless network and have since plugged in a ethernet cable to use because I can get a better connection, but even with it plugged in I still seem to be connected to the wireless network How can I make it so its only using the ethernet connection?
View 1 RepliesAt the moment, I have an ADSL modem/router (1 port) connected to my switch (ethernet port 1 on the server and all my clients are also connected into this same switch). ADSL router has IP address 192.168.2.222 (assigned manually - outside my DHCP range). X Serve operates as DHCP for everything else and I put the default gateway as 192.168.2.222. Internet works fine on all computers (including server). But I want the ADSL modem/router to be connected to ethernet port 2 on X-Serve (not straight into the switch). If I just unplug the ADSL router from the switch and plug it into port 2 of the X-Serve, the server can access the internet, but all clients can no longer. Anyone have *any* clue how to fix this?! It doesn't seem that complicated, I feel I have done everything right.
View 4 Replies View RelatedI was just wondering if any other macrumorsmembers have been in the situation where there's no wifi, no decent 3G, but ethernet ports available to use, but you don't have a computer handy? Would it be possible that you could create an ethernet cable one end, dock the other, and literally connect e.g. an iPhone into the ethernet? At my place of work, there's no signal (dodgy GPRS/flakey Edge), some wifi, but in halls of residence, you get 1 ethernet port, and you can't put a wireless router onto it. It would seem that it would be an interesting solution, if it was possible.
View 4 Replies View RelatedI'm running OSX 10.5.8 on a Macbook Pro, and today I've been unable to connect to the internet via ethernet or wi-fi, unless I'm in safe mode. Then everything seems to work as it should, which makes me believe that this is a software issue rather than a hardware problem. I've tried making a new account with administrator priveleges, but that doesn't solve my issue. Does anyone have any advice on how I can connect to the internet under my normal user account, rather than in safe mode? I should note that I won't be able to get my hands on my repair CD or perform a clean install of OSX because that stuff is at home, and I'm in college. Also, I'm at a university and don't have a router. I just use the campus-wide wi-fi. Finally, my roommate has no problem accessing the internet in our room via ethernet or wi-fi, but I do. Thanks for the help everyone.
View 5 Replies View RelatedFor specific reasons, I needed to connect my Synology DS211 NAS to my iMac directly via its ethernet port. I discovered that if I share my wireless internet connection (coming from my cable modem/wireless router) from wireless to ethernet, then the NAS would get the IP stuff it needed to show up. did that, voila, NAS is acting like a glorified external hard drive. BUT, when I did that, I lost all internet connectivity on my iMac. Still have full wireless signal. preferences pane says I'm fully connected to my network with an IP address, but safari always fails to pull up any webpages, saying I'm not connected to the internet.As soon as turn off the ethernet PORT, it all starts working again. And to make it even crazier, I discovered that if I leave sharing my wireless internet via my ethernet port ON, but turn off the ethernet port (in pref pane), I can STILL access the NAS just like before. That makes no sense - I'm sharing my internet via a port I have turned off, but it works? Anyway, why would Iose my airport wireless internet connection when the ethernet port is on - configured manually?
Info:
eMac 1.25GHz & iMac Intel 2.0GHz Intel, Mac OS X (10.5.8), 80GB external FW, 1GB RAM, Superdrive(DL)
I have an iMac and a Mac Pro that I frequently connect with a ethernet cable to transfer movies back and forth, When I do this, it messes up the internet connection between the two Macs as well as Windows computers in the house. The internet connection will just stop every few minutes and it takes several clicks to get links to open. If I click on a link once, I just get the spinning wheel and that will keep spinning all night if I let it, same with the Windows computers. Web pages never load up completly, even now there is a blue bar accross the internet address as I am typing this in Safari.
The problem remains for a long long time, even days after I've removed the ethernet cable from the Macs.
The computers are all using WiFi and an AEBS.
I have a Mac Pro and a Mac Book Pro systems running Lion and I want to connect them via an Ethernet cable.
They can see each other in the Finder window, but when I move files, it uses the wireless connection rather than the afp one which is supposed to be much faster. I have to turn the WIFI off every time I move files which is very inconvenient. Â
Info:
Mac Pro, Mac OS X (10.7.3)
I am currently trying to connect my eMac - to the internet via a stick/dongle and cannot find the appropriate vodafone software to make it work.Software version 10.5 on the mac and have two internet sticks one - a Huawei K3770 and a K3571 both with VodafoneAny idea, please, on where I can download this software and anything else I can do to to make a connection to the internet?The Vodafone software runs yet does not see either device. The connection through ethernet is great.
Info:
eMac Ser:VM50102CQJ8, Mac OS X (10.4), G4 Processor, 1Gig Memory, EMC 2006
Whenever I plug my Time Capsule into my Macbook with an ethernet cable it is not recognised. On the network setting it says that the ethernet is assigned an IP but whenever I try to start a backup session the device is not displayed? I can connect the Time Capsule wirelessly however due to the time it takes to do the initial backup I want to do it via ethernet.
View 5 Replies View RelatedI got my printer connected via usb. Can it be available for the computers that are connected on the same wireless network or I have to connect it via ethernet?
View 3 Replies View RelatedCan I connect a wireless router to the second ethernet port of my MacPro? I have the main ethernet cord from the modem connected to my ethernet port 1, then I connected my router to my computer through ethernet 2, thinking that it would broadcast the internet connection. However, it is not working. The router is broadcasting, but the internet isn't working (and the light indicating internet connection on the router is yellow, not green). Is this something that isn't possible? Or do I need to change settings (not just plug and go)?
View 9 Replies View RelatedI have tried searching for a similar question but have not been able to find an exact match. I have a new MacBook, a PS3, a Virgin Mobile USB and an Ethernet cable and I thought putting them all together so I could use the PS3 online would be easy! Could someone please give me a step by step process of what I am meant to be doing.
View 2 Replies View RelatedI have to connect to the work LAN using an ethernet cable, with the IP address and port number they give me.
I get so far as being able to download my email but can not send email or connect to the internet with safari.
I enter the IP address through System Prefs - Network.
I enter it under DHCP with manual address. I can not find anywhere to enter a port number
I run all the usual diagnostics (through safari when it can't connect)
I am the only mac user on the rig, and as I am only there for 2-3 days at a time I can't seem to find anyone who knows what to do. The are all PC users. I have a MacBook Pro OSX v 10.5.2
I would like to know the various methods for connecting to my Time Capsule Disc via gigabit Ethernet (I do not care to use it for wireless at all — I just want to take large amounts of data off of it the fastest way possible). Â
I used to be able to connect in a way that would give me a green icon (with people) for the disc. That was the fastest method I'd found and I've forgotten how I did. I thought I did it via the "Go" menu somehow but it seems to be different in Lion...Â
What are the various methods? I am not sure I understand the differences between AFP/SMB or even how to properly access the disc these ways. Or even if that is relevent. Â
Are there any specific time capsule settings I may need to change? As of now the wireless is set to off. I am using the latest firmware for the Time Capsule and the newest version of Airport Utility. Â
i am trying to connect my macbook to my ibook with my ethernet cord.
but every time i try to connect, my macbook seems to freeze and i get the spinning beachball..
i know that it is possible to connect a HD to the AE by the usb port but now that manufacturers are offering more and more external HD with ethernet is it possible to connect them to the Airport Express or do i really have to spend more to get the Extreme?
View 9 Replies View RelatedI have a new 1 tb Time capsule that I connected with the macbook pro i7 with a ethernetcable in the ehternet outlet next to the usb on the time capsule.
However, I dont see the time capsule hard drive in the Macintosh HD devices.
Two days ago my iBook G4 1Ghz started to have a big problem in turning it on: when I pushed the power button the fan started to whirl speedier than usual and nothing happened. The monitor stayed turned off and the startup "Boeing" did not sound. I tried to reset the PMU and the PRAM several times and the iBook finally turned on (I still don't know why!). I did a hardware test and no problems were detected.
Then, I connected my connection Ethernet cable and the computer crashed down. Now I am in the same situation that I've just described: I can't turn the computer on anymore and the fan starts wheeling. I also showed this problem to a local Apple center and they told me that the motherboard is dead. I am still not convinced, because one time I have been able to restart the iBook. Is the motherboard really broken?
Airport Express wifi MacBooks and the hard wired ethernet MacMini no simultaneous connection via hub Network consists of Cable Modem; Airport Express (1 ethernet port) 2 x wifi Macbooks; Mac Mini (ethernet )
4 Port ethernet hub connects the network OS X 10.5.8
Configuration
Port 1 on hub cable modem
Port 2 on hub Airport Express (not Airport Base Station)
Port 3 on hub MacMini
Both connect without the other plugged into the hub but not simultaneously The first to connect seems to gain control of the connection
So far I haven't been able to get an airport connected computer to share its connection via ethernet with another. Am I doing something wrong or is this not possible?
View 2 Replies View RelatedI am sure this may have been asked before , but I am having a problem finding an answer. I have an iMac (2008) and my wife has a ACER E500 PC (No WiFi connection), running Windows XP Media Edition. The only internet connection we have is to my iMac, so as both my iMac and my wifes PC both have Ethernet connections , I am trying to share my iMac internet connection to my wifes PC via an Ethernet cable, I am having no luck in getting it working.
View 4 Replies View Related2010 i7 15'' MBP. I've been connected to the internet wireless with my Airport Extreme from day 1, but today I wanted to give the ethernet port a try and it just didn't work. The ethernet cable is recognized, but it says there is no IP. I do not know my IP settings or any of that. What do I do?
View 2 Replies View Relatedive successfully done this before with 10.5 and xp and am trying to replicate with 10.6 and win7.
my imac connects to internet via airport. i want to share that internet with a win7 box via ethernet cable. i've turned on internet sharing in sys prefs but to no avail.
Recently got a Mac pro. However my room only has one network socket going into my router, this goes to ethernet port 1. Internet works fine, no issues. However my old desktop (that the MP replaced) can't get online now - no second network port from the router into the room the computers are in. I have a crossover cable that I've used to connect the 2nd MP ethernet port to the PC ethernet port. However I can't get internet access on the PC. If the PC and port 2 are on their own subnet (not the router/port 1 subnet) I can get file sharing going between the MP & PC, but cannot figure out how to get the router/MP/PC on the same subnet together using both ethernet ports of the MP. I have already tried enabling internet sharing under system prefs etwork, but it doesnt work. Network: Router (connected to internet) at 192.168.1.1 - connected to mac MP port 1 - 192.168.1.2 - works fine in connecting to the net MP port 2 - 192.168.255.1 - works in networking to PC for filesharing PC - 192.168.255.2 - works in networking to Mac for filesharing Any combination of 192.168.1.xxx for the MP port 2 and PC, they can't fileshare anymore and there is still no internet for the PC. Anyone know how to do this?
View 17 Replies View Relatedso basically this powermac g4 quick silver 733mhz is giving me big problems connecting to the internet, its got built in ethernet and modem, also a ethernet card, and wireless usb dlink thing. so i install the driver for the dlink usb thing driver works etc, it says its connected but wont go to a page apple.ca (safari), so then i put the ethernet cord in the ethernet card lights flashing then goess to apple.ca so how can i just get the internet to work using usb only and ethernet only? im assuming the built in thernet isnt working on a case of that theres a card there i might just reinstall tiger off a imac g5 since i rember the internet setup was so much easier, wait nvm about the off a imac g5
View 2 Replies View RelatedIve got a pretty fast internet connection at home and I have just realised that when I plug my iBook and desktop pcs into my wireless router ethernet (LAN) ports I get a much faster internet connection speed compared to the wifi.I.e. 12-17mbps when through ethernet and when I connect to the wifi I get 2-4mbps. My computers are all located in the same room no more than 5 metres away from the router.
View 4 Replies View RelatedI'm brand new to Mac. I just got a MacBook Pro, and I've been having some troubles connecting to the internet at home. I have a LinkSys WRT54GS router with Firmware Version: v1.50.9. I'm unable to access the internet through both ethernet and wireless. Concerning wireless, I have tried connecting using WEP, and have tried entering passcodes both with and without an "$" and "0x" preceding the 10 digit WEP passcode. I have also tried switching the encryption over to WPA2, and still nothing. I have even disabled the security to see if it's able to connect -- it's not. I had some error regarding not being able to find it's IP or something along those lines.
View 4 Replies View RelatedI know the steps for internet sharing airport card's internet access to another computer via ethernet cable, but how do i set it up to share it with a router via ethernet cable?
View 1 Replies View Relatedmy macbook air does not connect to the internet via ethernet anymore. I have changed cables etc but nothing. Wireless is fine.
View 2 Replies View RelatedI usually have all my computers, mac or pc, connected over Ethernet and only use Wifi for phones and guests. A while ago i started not to be able to connect to the internet anymore, although i hadn't changed anything on the mac or my router. I tired all possible troubleshooting routines to get to the bottom of it but with no success. Reset network ports in System prefs, Cocktail maintenance, Repairing disk and permissions booted from recovery partition, deleted SystemConfig files, reset the router to factory settings and reconfiguring, checked DHCP settings for ip conflicts, just nothing works.
I can connect to the internet over wifi without problems on the Macbook Pro.I can connect over ethernet to all other shared devices and computers on my network.When i run the Network Diagnostics with Ethernet as primary interface all lights are green and it says my connections are working but i cannot connect to any internet address, all pings time out with any port or protocol (ftp, mail, http, ssh)Other PC's and Macs can connect over ethernet to the internet without problems using the same cable.
Info:
MacBook Pro, Mac OS X (10.7.4), MID-2010 MBP 17"
