Hardware :: AirPort Express And Ethernet LAN

Feb 10, 2010

I apparently have a unique situation. My ethernet connection, if that is what it even is, comes out of the wall. No connection, nothing like that, it just goes into the wall, and disappears. They told me on the phone it's a LAN. I have my IP, Subnet, default gateway, and DNS numbers. When I plug the cord into my computer, using the IP4 thing, it works fine. I have to put the numbers in myself, no big deal.

Then I plug my APE in, and go into the utility to try to set it up. I enter all of those numbers. But run into all kinds of problems. Vista has no probs connecting my comp up to the airport, but airport has probs getting onto the net. I have fiddled around for hours trying to enter the numbers differently, but with no luck.

View 1 Replies


ADVERTISEMENT

OS X :: Configuring AirPort Express Over Ethernet

Jan 7, 2010

I am attempting to set up a wireless network with an AirPort Express in order to access the Internet from my iPod touch. My computer is a 2002 PowerBook G4/667 running OS X 10.4.11 (the latest OS it can run), and according to an Apple Store Genus, either the AirPort card or the AirPort antenna is shot, rendering the PowerBook useless as a wireless device. Adding to the pain, my cable modem has only one Ethernet port. Hence, I have purchased a Belkin F5D5050 USB/Ethernet adapter (and installed USBPegasusEthernet 1.0.9 as a kernel extension to make it work).

Which I plan to use to connect the AirPort Express to the computer (via the Ethernet port on the Express and the USB port on the PowerBook). The modem would be connected via Ethernet directly to the PowerBook's sole Ethernet port. Everything I read on the Internet says that I should be able to configure the AirPort Express over Ethernet via AirPort Admin Utility, but the utility doesn't seem to see the Express, even if I directly connect them to each other (one Ethernet port to the other). How I could make my network operational?

View 3 Replies View Related

Hardware :: AirPort Express (From WiFi To Ethernet)

Sep 1, 2010

I was just checking if I can set the Airport express to receive my Airport Extreme's WiFi network and connect a non-WiFi device to the Airport Express ?

View 2 Replies View Related

Hardware :: Airport Express - How To Connect To Ethernet

Mar 29, 2008

I have a problem with my Airport Express. I plug it in to the plug and connect the ethernet. When i go to search for the base station on Airport Utility it doesn't show it and it tells me to rescan to see if I can find it but it never does. Any ideas on how to fix ?

View 11 Replies View Related

Hardware :: Airport Express Ethernet Bridge?

Sep 28, 2008

Basically I have a linux machine and I cant get the internet sharing to work either they ping each other however won't let it access the internet so thats a different story but; my dad claimed I could use the airport express as a wireless-to-Ethernet bridge, it's connected to the wireless network however how do I get it to transmit the connection through the Ethernet cable?

View 8 Replies View Related

OS X :: Using Airport Express With Extend Network - Ethernet

Apr 17, 2009

When i try to extend my network with my Airport Express it creates another wireless network, wich is not what i want.

I have a Leve1 router as my main, connected to my modem.

My airport express is connected to the network with a CAT5 ethernet cable.

I use the setup in Aiport Utility and choose:
I Want Airport Express to join my current network ->
I want to connect AirPort Express to my network using Ethernet to extend my current netork or create a second network ->
I choose my network on the list and click continue ->
I want to connect AirPort Express to my network using Ethernet to extend my existing wireless network ->

And then it doenst join my network, but creates a new called Apple Network 00a133..

View 6 Replies View Related

Hardware :: Use AirPort Express Without Ethernet Cable?

Aug 26, 2009

I live in a district where phone lines don't reach, therefore I don't have wire internet: only a 3G modem. Can I use AirPort without a cable? Or could I plug in the USB 3G modem into it instead?

View 2 Replies View Related

Hardware :: Connecting HD To Airport Express Using Ethernet?

Nov 28, 2009

i know that it is possible to connect a HD to the AE by the usb port but now that manufacturers are offering more and more external HD with ethernet is it possible to connect them to the Airport Express or do i really have to spend more to get the Extreme?

View 9 Replies View Related

Hardware :: AirPort Express Without Ethernet Cable?

Mar 26, 2010

I'm planning to buy an AirPort Express. But I have a question. Can I stream my music wireless from iTunes on my Macbook, without connecting the AirPort Express to an Ethernet cable?

View 3 Replies View Related

Hardware :: AirPort Express Units - Ethernet Ports

Nov 8, 2010

I recently found out that the Ethernet ports on the Airport Express Units are 100 MBits only. With a Time Capsule I am able to get 15-18 MB / sec via the WiFi, but the Airport Express, even though it has the same Air-capabilities, is limited to around 11 MB / sec through its Ethernet port. I hope they will get upgraded with Gigabit soon, I will replace all in my household. Is there any info on when it might happen?

View 4 Replies View Related

Hardware :: WiFi To AirPort Express Via Ethernet Connector

Dec 17, 2010

Can the ethernet port on the the airport express be used to plug in a non wifi piece of equipment. Example I have a wireless router: WiFi to airport express (via ethernet connector) to xbox360.

View 3 Replies View Related

Hardware :: AirPort Express Ethernet And Time Capsule

Jan 18, 2009

The Apple site is quite vague on this point but I thought I'd clarify before buying one. I have a Time Capsule as my main router, but I want to move it, but when I do it's out of range of one of my computers. Can I plug the Express in near the computer, and then Ethernet it up to the computer, or is that Ethernet port meant to go into the TC?

View 3 Replies View Related

Hardware :: Possible To Connect Airport Express And Ethernet At The Same Time?

Jan 26, 2009

is it possible to run both a wireless connection with airport express, as well as have a direct ethernet connection to the computer? i have a simple, two-way ethernet splitter than comes from the port in the wall that should technically be able to do this, but i have tried this without success and i am guessing there is a little more to this problem than just having both connections hooked up at the same time.

anyways right now i am running on an airport express wireless connection. at my school there is a campus-based p2p program that can only be accessed through direct ethernet connection, leaving me inaccessible to it when i am on my wireless connection. there is a bunch of registration junk that has to be done when i switch from ethernet to wireless, which is why i would prefer to have both set up at once.

View 3 Replies View Related

Hardware :: Airport Express,extending Network But No Ethernet?

Apr 19, 2009

I have a Airport Extreme and I would like to extend my network with an airport express but not sure if the airport express is only extending the network if it needs to be plugged into a ethernet if it is only bouncing the network on. Or does it have to have a fixed ethernet wire in it.

View 8 Replies View Related

OS X :: Network - Comcast - Ethernet - AirPort Express / Extreme?

Jun 21, 2009

I finally convinced a friend to get a Mac and bragged about how easy everything works. He got a new iMac (loves it!) and signed up for Comcast High Speed Internet. Now there is a new MacBook in the house so I explained that all he would need is the AirPort Express in order to share the internet wirelessly for both Mac's. I went to set it up and I screwed everything up, after hours of work I not only couldn't get the Express working, I had to leave him without even ethernet internet. That's really all the info about his setup I have at the moment. So I came home to examine my own setup which is very similar: we both have the same Comcast modem (Arris TM502G) except I have an AEBS and he has a Express.

So I came home to examine my setup, it has been a while since I set mine up but its been flawless wirelessly (I never used the ethernet before). So, I plugged a ethernet cable in to the AEBS and connected my MBP. Works great. So I want to try to cut out the AEBS and just connect via ethernet from my MBP to the cable modem, that's where I start getting IP address problems. When an ethernet cable is connected to the AEBS my IP address is 10.0.1.12 and works fine. When I cut out the AEBS and try to run ethernet directly from my modem to my computer my IP Address changes to 169.254.181.6 and I get an error message saying that "Ethernet has a self-assigned IP address and may not be able to connect" and sure enough, I can't. Network Diagnostics tells me to configure via DHCP and restart the modem, still no luck. As I was searching tonight I came upon some discussion about Comcast limiting MAC addresses or something?

View 5 Replies View Related

Hardware :: Won't Work With Airport Express / Ethernet Unplugged

Jul 24, 2010

I just got an airport express. airtunes works fine, but for some reason I cant get it to create a wireless network when i plug in the ethernet cable, it just tells me the Ethernet is Unplugged. The cable works, as I am using it to connect now.

The setup is :

Cable Modem - MSI RG60SE Wireless Router - Ethernet Cable to my room

View 4 Replies View Related

Hardware :: Running Ethernet Cable From XBOX 360 To Airport Express

Aug 25, 2008

I have been searching around the forum for this answer and I haven't found anything specific. Here is my network setup.

Bedroom:
Modem --ethernet-- Airport Extreme --ethernet-- iMac
Living Room:
Airport Express (Wirelessly Connected to Airport Extreme) currently setup for AirTunes using a bridged connection.

What I want to know are the specifics of running an ethernet cable from my XBOX 360 to the Airport EXPRESS and using that as my internet hook up to get on Xbox Live.

View 8 Replies View Related

Hardware :: AirPort Express Setup - Connected To Router Via Ethernet

Dec 16, 2008

I'm trying to connect an AE to my PC using XP with a D-Link DIR-655 WiFi router. I've used the airport utility and connected the AE to my router via ethernet. It appears to be setup properly and I can see it on the D-Link software. After disconnecting the ethernet cable and with the AE sitting next to the router it continually shows up and then disappears. The light is green on the AE. Then I disconnected the power and moved the AE into the place where I'm going to use it.

Now it will show up on my D-Link software occasionally but the light won't turn green. It also doesn't show up on the airport utility software. I also have a Touch and ATV that both work fine on the same network and the same location. The AE is about 30 feet from the router with only one wall in between them. Am I missing something here or could there be a problem with the AE?

View 6 Replies View Related

Hardware :: Using Time Capsule To Airport Express Ethernet Bridge?

May 20, 2009

Is it possible to use an Time Capsule to connect to an airport express with a router plugged into it?

I have a small network at home, and would like to have another computer (old PowerMac g4, no wireless card) and my xbox 360 in my basement. I don't want to run cables. Is it possible to connect a router to my airport express and use it to bridge the wired computers wirelessly to the time capsule upstairs? I know it's possible to use the airport express as an extension to the wireless as a WDS but I haven't found anything online about using it as a bridge.

View 2 Replies View Related

Hardware :: Get Airport Express - Connect Directly To 360 With Ethernet Cable?

Mar 13, 2010

I have an Xbox 360 set up in my bedroom which is at the opposite end of the house. I have an airport extreme base station (new model) connected to my modem and PC (PC is not wireless, thus why i have it connected).... I have the wireless adapter connected to my xbox 360. I can play online with no lag (game: modern warfare 2) when nobody is on the pc but when someone is on the pc I get very noticeable lag. I guess I am fighting to split the connection with the pc. What is my best solution? 1) Have my ISP boost the speed of my modem. I didn't know if this would help by giving us more speed to fight over. 2) Get an Airport express and set it up closer to my bedroom/xbox 360. Will the express still fight for the connection with my pc like my wireless adapter on the 360? 3) Get the airport express and connect it directly to my 360 with an ethernet cable. Will i still be fighting for connection with the pc?

View 3 Replies View Related

Hardware :: Connect Both Airport Express And Ethernet Wire To Router?

May 16, 2010

I have a modem (Tilgin Vood 342) that came from the phone company which I use to connect my old desktop PC and my new MacBook Pro to the internet, through two separate ethernet cables. The modem has three ethernet ports and connects to the internet through an ethernet port in the wall. I want to buy an Airport Express in order to get wireless internet to my MacBook, but since my desktop PC can't receive wireless internet, I still need it to be plugged into the modem through a cable (I don't mind that). So my question is, can I use one of the modem ports for the Airport Express and another for the ethernet cable without there being a conflict?

I'm asking because I went to an electronics store and I was told that there might be a conflict and that I should buy an Airport Extreme or another router with ports in order for it to work. I would really prefer the Express because it's and it's the most I can pay for.

View 11 Replies View Related

Hardware :: Airport Express Wifi + Hard Wired Ethernet Not Connecting

Mar 29, 2010

Airport Express wifi MacBooks and the hard wired ethernet MacMini no simultaneous connection via hub Network consists of Cable Modem; Airport Express (1 ethernet port) 2 x wifi Macbooks; Mac Mini (ethernet )
4 Port ethernet hub connects the network OS X 10.5.8

Configuration
Port 1 on hub cable modem
Port 2 on hub Airport Express (not Airport Base Station)
Port 3 on hub MacMini

Both connect without the other plugged into the hub but not simultaneously The first to connect seems to gain control of the connection

View 2 Replies View Related

Hardware :: Just Plug An Airport Express Into Ethernet Point - Second Wifi On Home Network

May 19, 2010

Our wireless router (some standard linksys one) is downstairs. Wireless is mostly used down there so need strongest signal. Then it's plugged into an ethernet point, which goes up to the loft in a box, where it feeds into a 16-port switch, then back out to ethernet points in each room of the house. (recently renovated the house and ran Cat-5e everywhere.)Currently I have to connect via the ethernet point in my room with a network cable as I can't pick up the wireless signal. Which sucks a bit, being tied down when on a macbook pro.Could I just plug an Airport Express into the ethernet point in my room and set it up as a second wireless point, which I can use in my room? Or is that not what it's for?

View 3 Replies View Related

Hardware :: Airport Extreme Not Forwarding Airdisk To Connected Airport Express Network?

Apr 25, 2010

I have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.

Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.

My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.

For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.

The Airport Express is connected to the Airport Extreme in bridged mode.

View 1 Replies View Related

Hardware :: Can Airport Express/Airport Extreme Host More Than One USB Device?

Jan 29, 2009

Just a question for those who have used the Airports. Can a USB hub be used to expand the number of devices the Airport can use? i.e., an external hd, a laserjet, and an inkjet.

View 4 Replies View Related

Hardware :: Can An Airport Express Extend Range Of Airport Extreme?

Oct 11, 2009

Can it? If it can, would Airtunes still work like normal.

In other words, can I be connected to my Airport EXTREME and Airtunes would still work since the Airport EXTREME and EXPRESS are using the same network wifi-name (the Express is just extending the Extreme's range).

View 4 Replies View Related

OS X Mavericks :: Old Airport Express Running 10.9.4 - Cannot Install 5.6 Airport Utility

Sep 7, 2014

I have an old Airport Express (A1088).I am running OSX 10.9.4 - I have downloaded Airport Utility 5.6 and yet cannot install - I am getting "This version of Mac OS X  on this volume is not supported".Unfortunately no PC or old Mac available. I used to be able set up on IOS but cannot do that anymore either.Any clues how to re-setup this old airport that works ok.

Info:
MacBook Air (13-inch Mid 2012), OS X Mavericks (10.9.4)

View 2 Replies View Related

Hardware :: Airport Express Disappears From Airport Utility?

Apr 18, 2010

After configuring wireless security on my Airport Extreme base station, the Airport Express I use to stream iTunes music to my whole-house stereo system has disappeared. Airport Utility can't see it. Yes, I checked connections. All I get is a blinking yellow light on the Express. The base station works as its supposed to.

I have a 17" Powerbook G4 with a 1.33 GHz Power PC processor. I'm running MacOS 10.5.8

View 9 Replies View Related

Hardware :: Airport Express + WD HDD - Unrecognized Airport Disk

Jan 11, 2009

MBP 2.2; OSX 10.4.11; Airport Express 802.11n (version 7.3.2); WD MyBook 320GB (format Mac OS Extended) I'm trying to get the WD HDD setup as a wireless hard drive, but it's not showing up at all in Airport Utility (I don't even have a 'disk' tab in the 'manual setup' menu). Airport Disk Utility just says "no airport disks found." Of course the HDD works fine when plugged in directly to the MBP. I've searched apple support and these forums, but haven't found anything that works yet. All help I have found says use the 'disk tab' in AE manual setup window. What do I do without a 'disk' tab? (or how do I get one?) is this a firmware/software issue with the AE?

View 4 Replies View Related

Hardware :: Setting Up Airport Express Through Airport Extreme?

Mar 9, 2010

I currently have the apple extreme as my wireless router. It works great. I absolutely love it. I have two macbook pro's (wife and I both have one) and use it for my PS3 and Xbox 360. I started a new job and was given a free HP desktop (not my choice, but hey, it's free, so what can I say). The desktop is not wireless and I am not able to put my computer near the airport extreme because my TV already owns that territory. Today I bought the Airport express to use as a bridge (and other things in the future). I have plugged it in. I opened the airport utility using my macbook. It finds my extreme and my express. I select that I want to set up the express. I select that I want to set it up using an existing wireless network. I select my airport extreme. It tells me that it has to restart the express. I wait approximately 3 minutes. It then tells me that the settings to the express have been changed but it's not able to find it.

My main goal is to use the express as a bridge. I have the express plugged in beside the desktop and want to run an ethernet cable from the express to the desktop to allow for wireless capability.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved