OS X :: Macbook Airport And Ethernet Not Allowing Internet Through?
Nov 3, 2009
My macbook is not letting internet through from ethernet or airport but when i boot up xp with bootcamp both work so the drivers must be fine, this problem might have something to do with when i turn the computer on it doesnt always start up it go to the gray screen with the spinning loading wheel but also it gets the loading bar which you can see for 30 sec till it gets about 1/32 of the way though the bar so not far at all and sometimes doesnt boot at all. I am running snow leopard and luckily used time mach.
View 2 Replies
ADVERTISEMENT
Dec 2, 2008
So here is my problem: Originally I had an airport express set up to broadcast a wireless network. I had a printer plugged into the airport express. I also had an ethernet cord going into the airport express. When I was connected to the network, I could surf the internet just fine, and was able to set up the printer just fine as well. I then decided that I was not getting fast enough speeds wirelessly with my b/g airport express network, so I unplugged the ethernet cord from the airport express and connected it directly to my mac. With this setup I was able to surf the internet over ethernet, but even though I was connected to the airport express network I was not able to print. It would always give me errors... I read somewhere about how it looks at one service first or something... so I tried moving Airport to the top of the services in System Preferences, but that just made it so my internet didn't work. How can I print over the airport network and use the internet via ethernet at the same time?
View 2 Replies
View Related
Feb 21, 2010
This has been happening ever since I bought my Mac. I have reset + configured my router SO many times already and nothing is working. Can anyone explain why this is happening and/or what can I do?
The router is a Linksys WRT54G. Mac is running 10.6.2.
View 2 Replies
View Related
Mar 6, 2009
I have a 24" iMac that has completely all of a sudden stopped wanting to connect to the internet. However, my Macbook, connected to the same ethernet cord or wireless network, works flawlessly and has no trouble. The iMac will find the wireless network...show full bars...then drop a bar....then another bar, then another, until only the smallest bar is available. It will transfer data but only for a few seconds until it wont work at all. Now the macbook, sitting right next to the imac will show full bars and stay that way. So i tried a ethernet cable to the iMac and it will not even pull up 1 single page, but the same cable connected to my Macbook will work flawlessly.
View 3 Replies
View Related
Mar 24, 2009
I connect to the internet mainly through an ethernet cable, connected to my own base for ethernet connections (Might be a router, but doesn't connect directly to the internet) which is connected to the main Linksys router on the other side of my house, which even has a wireless connection.
Regardless, this setup has worked without issue for a long time now, but all of a sudden now, I cannot connect to the internet (On my Mac).
I have tried unplugging the routers, for extended periods of time, plugging them back in, but I cannot connect to the internet. Whats awkward, is that when I check the Network settings in the System Preferences, it says clearly is that the Ethernet Cable is connected (Which it is), and as a backup, I have even connected to my Wireless Network through AirPort (Which says it is connected), but I cannot connect to the internet through Firefox, or any instant messaging service.
On the main computer, with the main router, the internet works fine. When I try to load Firefox on my Mac, it sometimes takes a long time loading (On a blank screen), and never loads usually (With occasional loads, but usually does not connect).
View 1 Replies
View Related
Jan 1, 2010
I'm running OSX 10.5.8 on a Macbook Pro, and today I've been unable to connect to the internet via ethernet or wi-fi, unless I'm in safe mode. Then everything seems to work as it should, which makes me believe that this is a software issue rather than a hardware problem. I've tried making a new account with administrator priveleges, but that doesn't solve my issue. Does anyone have any advice on how I can connect to the internet under my normal user account, rather than in safe mode? I should note that I won't be able to get my hands on my repair CD or perform a clean install of OSX because that stuff is at home, and I'm in college. Also, I'm at a university and don't have a router. I just use the campus-wide wi-fi. Finally, my roommate has no problem accessing the internet in our room via ethernet or wi-fi, but I do. Thanks for the help everyone.
View 5 Replies
View Related
Jun 13, 2012
Sometimes when I am on the internet I see a colored wheel that spins and I am unable to go the the next page. I also noticed that sometimes the computer is slow. Csn this happen because I upgraded to Mac OS X? Never saw this before.
Info:
iMac (24-inch Early 2009), Mac OS X (10.7.4)
View 1 Replies
View Related
May 22, 2012
For specific reasons, I needed to connect my Synology DS211 NAS to my iMac directly via its ethernet port. I discovered that if I share my wireless internet connection (coming from my cable modem/wireless router) from wireless to ethernet, then the NAS would get the IP stuff it needed to show up. did that, voila, NAS is acting like a glorified external hard drive. BUT, when I did that, I lost all internet connectivity on my iMac. Still have full wireless signal. preferences pane says I'm fully connected to my network with an IP address, but safari always fails to pull up any webpages, saying I'm not connected to the internet.As soon as turn off the ethernet PORT, it all starts working again. And to make it even crazier, I discovered that if I leave sharing my wireless internet via my ethernet port ON, but turn off the ethernet port (in pref pane), I can STILL access the NAS just like before. That makes no sense - I'm sharing my internet via a port I have turned off, but it works? Anyway, why would Iose my airport wireless internet connection when the ethernet port is on - configured manually?
Info:
eMac 1.25GHz & iMac Intel 2.0GHz Intel, Mac OS X (10.5.8), 80GB external FW, 1GB RAM, Superdrive(DL)
View 1 Replies
View Related
Oct 11, 2010
2010 i7 15'' MBP. I've been connected to the internet wireless with my Airport Extreme from day 1, but today I wanted to give the ethernet port a try and it just didn't work. The ethernet cable is recognized, but it says there is no IP. I do not know my IP settings or any of that. What do I do?
View 2 Replies
View Related
Mar 17, 2012
my macbook air does not connect to the internet via ethernet anymore. I have changed cables etc but nothing. Wireless is fine.
View 2 Replies
View Related
Jun 6, 2012
I usually have all my computers, mac or pc, connected over Ethernet and only use Wifi for phones and guests. A while ago i started not to be able to connect to the internet anymore, although i hadn't changed anything on the mac or my router. I tired all possible troubleshooting routines to get to the bottom of it but with no success. Reset network ports in System prefs, Cocktail maintenance, Repairing disk and permissions booted from recovery partition, deleted SystemConfig files, reset the router to factory settings and reconfiguring, checked DHCP settings for ip conflicts, just nothing works.
I can connect to the internet over wifi without problems on the Macbook Pro.I can connect over ethernet to all other shared devices and computers on my network.When i run the Network Diagnostics with Ethernet as primary interface all lights are green and it says my connections are working but i cannot connect to any internet address, all pings time out with any port or protocol (ftp, mail, http, ssh)Other PC's and Macs can connect over ethernet to the internet without problems using the same cable.
Info:
MacBook Pro, Mac OS X (10.7.4), MID-2010 MBP 17"
View 1 Replies
View Related
Oct 12, 2010
I'm here at university and the wifi here sucks! it is so slow, it is working.However there is an ethernet port and I did connect to it this morning. But, this evening I tried connecting again and it wouldnt let me!At my university they require you to put in your student ID and pw in order for you to use the internet for both wi-fi and ethernet. But when i tried this evening it dint ask for my student ID or password. I went to settings and it did say that there was a connection and that "Ethernet has a self-assigned IP address and will not be able to connect to the Internet"
i dont understand how come now it isnt working. I aksed my classmate nextdoor if his internet port was working through the ethernet port he said it was.... i am not that tech savy so keep vocabulary to something simple lmaooo.
View 4 Replies
View Related
Dec 17, 2010
tried using an ethernet to USB adaptor. I saw one at Fry's for $20. I normally do not have need for ethernet but one hotel I have stayed at seems to only have an in room ethernet connection to get on line.Would I notice any difference between an adaptor that supports USB 2 vs USB 1 while surfing the internet?
View 2 Replies
View Related
Apr 26, 2008
I have an ibook with Leopard installed and its connected to the internet through airport. What I'm trying to do is share the internet connection to my xbox via an internet cable but i cant find any settings in system preferences to do that.
View 5 Replies
View Related
Mar 19, 2012
I've been trying to connect over internet sharing from my Macbook pro to my i-pad 2 and am having some issues I hope someone can adress. I go to Settings>Sharing from ethernet then to wifi. I name the network choose a channel then add a password from there I get this error message.Â
Are you sure you want to turn on Internet sharing? Â
If your computer is connected to a network, turning on Internet sharing may affect the network settings of other computers and disrupt the network. Contact your system administrator before turning on Internet sharing.Â
Info:
MacBook Pro
View 1 Replies
View Related
May 28, 2012
I'm trying to use my Wi-Fi to surf the internet and the Ethernet to log to my LAN Network. Both networks have access to the inernet through different ISP's and both have Wi-Fi modems. I set up the Wi-Fi as my preferred network followed by the Ehternet connection. That way I can surf the web through the ISP that I want and I can see the other computers on the LAN Network. However, when I try to use any of the Network printers of log to the server I can't connect. Can anyone tell me if I have to set up the connections in any particular way? I'm using Mac OS X Lion on a Macbook Pro 13". The server controlling the LAN is a Windows Server 2008 R2.Â
Info:
Mac Pro, Mac OS X (10.7.4), CPU i5 2.4 ghz
View 2 Replies
View Related
Jul 7, 2009
Moved thread to the help forum
(URL)
View 7 Replies
View Related
Mar 11, 2010
I was wondering if anyone knows if its possible to share my LAN internet to an XBOX 360 using the Apple USB ethernet cable (for the Macbook Air) on my Macbook Pro 13"? I've tried several routers, and all have them have failed me giving me massive timeouts and sudden disconnects. I think this should be a good solution.
View 2 Replies
View Related
Jun 8, 2012
My macbook wont load any web pages. It is connected to my wifi network and it says my Internet connection is good under my network settings. All my other devices on the network have no issues (ipad2, 2-iPhone 4's and 2-PS3s). Also when I connect my MacBook to my router with an Ethernet cable it loads any and all web pages instantly. I also tried installing Firefox thinking it may have been an issue with safari. No luck there. The issue was intermittent at first and would require I restart my computer/router and then issue would be corrected. Now the internet wont load any pages at all. I also tried zapping the PRAM, flushing the DNS cache, removing files from the system config folder under Library/Preferences/system configuration and a few other things I can't exactly remember. My MacBook is up to date, my routers firmware is up to date. I even tried tethering my MacBook to my iPhone via wireless Internet and still could not load any websites.
Info:
MacBook (13-inch Early 2008), Mac OS X (10.7.4)
View 3 Replies
View Related
Nov 4, 2010
I've got an ethernet cable and i thought i'd share my internet connection through 'sharing' under network preferences, to allow the windows 7 computer to get online as well.
the windows laptop cannot connect to the internet. I've managed to do this before with no problems when i was sharing a USB 3G dongle's connection over wifi.
View 5 Replies
View Related
Aug 3, 2008
i've recently got the Ethernet adapter for MBA and I am still unable to connect to my home internet connection... It continues to give me a "self-assigned IP".
View 3 Replies
View Related
Dec 10, 2010
So far I haven't been able to get an airport connected computer to share its connection via ethernet with another. Am I doing something wrong or is this not possible?
View 2 Replies
View Related
Sep 3, 2009
I currently have my mac connecting to a wireless network and have since plugged in a ethernet cable to use because I can get a better connection, but even with it plugged in I still seem to be connected to the wireless network How can I make it so its only using the ethernet connection?
View 1 Replies
View Related
Nov 23, 2009
I am sure this may have been asked before , but I am having a problem finding an answer. I have an iMac (2008) and my wife has a ACER E500 PC (No WiFi connection), running Windows XP Media Edition. The only internet connection we have is to my iMac, so as both my iMac and my wifes PC both have Ethernet connections , I am trying to share my iMac internet connection to my wifes PC via an Ethernet cable, I am having no luck in getting it working.
View 4 Replies
View Related
Dec 27, 2010
ive successfully done this before with 10.5 and xp and am trying to replicate with 10.6 and win7.
my imac connects to internet via airport. i want to share that internet with a win7 box via ethernet cable. i've turned on internet sharing in sys prefs but to no avail.
View 5 Replies
View Related
Feb 12, 2007
Recently got a Mac pro. However my room only has one network socket going into my router, this goes to ethernet port 1. Internet works fine, no issues. However my old desktop (that the MP replaced) can't get online now - no second network port from the router into the room the computers are in. I have a crossover cable that I've used to connect the 2nd MP ethernet port to the PC ethernet port. However I can't get internet access on the PC. If the PC and port 2 are on their own subnet (not the router/port 1 subnet) I can get file sharing going between the MP & PC, but cannot figure out how to get the router/MP/PC on the same subnet together using both ethernet ports of the MP. I have already tried enabling internet sharing under system prefs etwork, but it doesnt work. Network: Router (connected to internet) at 192.168.1.1 - connected to mac MP port 1 - 192.168.1.2 - works fine in connecting to the net MP port 2 - 192.168.255.1 - works in networking to PC for filesharing PC - 192.168.255.2 - works in networking to Mac for filesharing Any combination of 192.168.1.xxx for the MP port 2 and PC, they can't fileshare anymore and there is still no internet for the PC. Anyone know how to do this?
View 17 Replies
View Related
Sep 6, 2008
so basically this powermac g4 quick silver 733mhz is giving me big problems connecting to the internet, its got built in ethernet and modem, also a ethernet card, and wireless usb dlink thing. so i install the driver for the dlink usb thing driver works etc, it says its connected but wont go to a page apple.ca (safari), so then i put the ethernet cord in the ethernet card lights flashing then goess to apple.ca so how can i just get the internet to work using usb only and ethernet only? im assuming the built in thernet isnt working on a case of that theres a card there i might just reinstall tiger off a imac g5 since i rember the internet setup was so much easier, wait nvm about the off a imac g5
View 2 Replies
View Related
Apr 3, 2009
Ive got a pretty fast internet connection at home and I have just realised that when I plug my iBook and desktop pcs into my wireless router ethernet (LAN) ports I get a much faster internet connection speed compared to the wifi.I.e. 12-17mbps when through ethernet and when I connect to the wifi I get 2-4mbps. My computers are all located in the same room no more than 5 metres away from the router.
View 4 Replies
View Related
Oct 1, 2009
I'm brand new to Mac. I just got a MacBook Pro, and I've been having some troubles connecting to the internet at home. I have a LinkSys WRT54GS router with Firmware Version: v1.50.9. I'm unable to access the internet through both ethernet and wireless. Concerning wireless, I have tried connecting using WEP, and have tried entering passcodes both with and without an "$" and "0x" preceding the 10 digit WEP passcode. I have also tried switching the encryption over to WPA2, and still nothing. I have even disabled the security to see if it's able to connect -- it's not. I had some error regarding not being able to find it's IP or something along those lines.
View 4 Replies
View Related
Jan 18, 2010
I know the steps for internet sharing airport card's internet access to another computer via ethernet cable, but how do i set it up to share it with a router via ethernet cable?
View 1 Replies
View Related
