I want to merge two OS X partition into one. In both of them it's installed OS X Mavericks but I don't need anymore the first partition.
Here's a screenshot of the partition table
I need to merge the 123.3 GB partition with the 34.9GB. Using Disk utility, if I erase the partition number 2, then can i merge the empty space (formatted with Mac OS X journaled) into the partition number 1, without loosing any file?
I have a new iMac using OS 10.9.4. I got an external HD for backup purposes and successfully formatted it. Now I want to create partitions; however, my Disk Utilities app does not contain any tab or command for creating partitions. Where should I be looking?
View 4 Replies View Relatedhow do I merge two partitions into one; all areas are greyed out on iMac (late 2013 model i7 3 TB 8 gb RAM).Created a second partition on iMac (Mavericks). After a few days I decided to delete that newly created partition and have been trying to merge it to create only ONE partition as it was in the original setup. However, disc utility shows everything greyed out and there is NO option to change anything. I have erased everything on that partition and thought "that should do it" -
Info:
iMac, OS X Mavericks (10.9.3), i7, 3 TB HD, 8 gb RAM
After I erase the hard disk it shows 74.5gb free, almost. It says there is 42.3mb of space being used by 2 files which I understand are used for read write or partitioning or whatever.
When I then leave disk utility and go to the actual installer, the destination disk (untitled - 74.5gb) shows only 73.9gb free space. What is taking up an additional 500mb of space on the hard drive?
Apple support told me that somehow the disk has been altered and I lost space on the disk or I am now using a seperate partition that isn't showing up. Disk utility shows only one partition with 74.5gb free space. He told me I can find information about how to 'merge' the disk on the apple support section under troubleshooting articles for disk utility. I have been unable to locate this information.
I have just had a new MBP delivered, its come through a company that provides machines for dyslexic students (myself). Its a replacement for my previous mac that I owned, suffice to say the other got destroyed. The company for some unknown reason put 2 partitions on the hard drive, its really annoying as I need to use the migrate assistant to put my old system on it and the 2 partitions are to small to accommodate it. My question.
1. Is it possible to combine these 2 partitions and if so how would I go about doing this from within the disk utility?
2. Is it also possible to transfer my partition over which held my bootcamp partition from my previous machine?
I am trying to make a single partition with Mac OS Journaled but Disk Utility won't let me. I currently have 2 partitions: MacHD with 80Gb and partition B with 3,35Gb (Partition where I used to have XP with BootCamp). I finished with XP and erased that partition to become Mac OS Journaled. Now I try to have a single partition but I couldn't. On the Partition tab of Disk Utility, when I select the whole machine (FUJISTSU MHW2120BH) the option Partition is dimmed and won't work.
I also tried iPartition, but it tells me: To make changes to this disk you should either boot from an external drive, use Target Disk Mode with another Mac, or create a bootable CD/DVD. You can create a bootable CD/DVD by running Coriolis CDMaker, which should be available from you distributor. I thought my instalation DVDs would work as bootable, but: I tried with the Tiger instalation DVDs but it makes me chose one of the partitions to format and won't let me do both at once.
I've a lot of files in Mac and my time machine back up drive now. Since most of my files are spreadsheet, doc, MP3 files and they can inter use in my Mac and Windows 7 PC. There are 4 Mac partitions and one PC partition in Mac Disk utility I can use. Do you know which partition I can use and Windows 7 PC will see them. In this case, I can just use that partition transfer the files form Mac to PC?
View 2 Replies View RelatedSeems that I have messed up my Macbook Pro hark disk. Opening disk utility on macosx 10.5.8 shows that my disk in partitioned as this:
1)Macintosh HD
2)Apple_HFS disk0s3
3)Linux Swap
All of them appear to formatted as Mac OS extended (journaled) although the Linux Swap partition appears as Unmounted and cant be mounted nor use first aid on it. the others 2 appear to ok on verify disk test. What I want to do is remove partition 2 and 3. As I mention disk utility fails both under macosx and also when i use it booting from Mac OS X install disk. Should I use something like g-parted to boot from and re arrange my partitions or will this further mess up my disk? will MBR be affected?
I'm using OS X 10.9.5, with Disk Utility version 13.
One of my internal drives has two partitions of 1 TB each.
Can I use Disk Utility to RESIZE one of the partitions to 1.75 TB?
Looking at the DU interface instructions, it says "To resize a partition on the selected disk, drag its resize control and click Apply."
However, Disk Utility says "To enlarge a partition, you must delete the partition that comes after it on the disk, then move the partition’s end point into the freed space. You can’t enlarge the last partition on a disk."
So, all I want to do is Reduce the size of the bottom / last partition; then, Increase the size of the top / first partition.
Can I safely do this by first dragging the last partition's "resize control" then dragging the first partition's "resize control"?
I am thinking of doing a triple boot (SL, Debian and Win7). However because I am really doing this because I can (or at least attempt), it strikes me at some point I might decide I want to go back to all Snow Leopard. Now here's the thing; is it easy to increase the space of the SL install again if I decide to trash Win7. I'll build the space for Debian at the end as I am positive I won't be trashing that partition.
So something like:
Snow Leopard - 250GB
Windows 7 - 125GB
Shared Partition (probably NTFS) - 50GB
Debian - 75GB
The most likely partition to go is the Win7 one and I would like to either add it to Snow Leopard or the Shared Partiition. That is, I would like to increase the size of one of them.
I recently replaced Leopard 10.5 with a clean installation (not an upgrade) of Snow Leopard 10A432 (SL) on my Intel Core 2 Duo MacBook (aluminum, 2GB RAM). Under Leopard 10.5 I was able to use Disk Utility (DU) to dynamically re-size existing volumes on USB hard drives. But under SL I am unable to do so. While I am able to replace all existing partitions on a USB drive with a new set of partitions and resize them prior to their creation by dragging the slider bars, once created, DU will not let me dynamically resize the new partitions. Doing so was easy with DU under 10.5. For example, after I re-partitioned a USB drive with DU under SL and created 2 partitions, I was able to make the top partition smaller by dragging the bottom edge upward from the lower right corner, but there seems to be no way (and no slider bars) to adjust the size of the lower partition to use the space freed by having made the upper partition smaller. In fact, although the upper partition reports a smaller size, when clicked on, the border around the upper partition still includes the range defined by its initial, larger size. There also seems to be now way (no slider bars) at the top edge of partitions that would allow them to be expanded/contracted from the top down. Has anyone else encountered these issues? Any thoughts/suggestions as to how to resolve them? Are these known issues? I have searched but not come across it as yet.
View 5 Replies View RelatedI need an AppleScript to restore a bunch of partitions from a master drive to a stack of external target drives. I don't mind partitioning them 1st, if necessary.The master drive has 16 partitions, all equally sized, and I'd like a script to run that will have Disk Utility to just go down the list restoring each partition to the matching 16 partitions on one of the target drives.
Info:
Mac OS X (10.7.3)
i need to merge partitions on external drive. one is empty, one is not. i tried with ipartition demo, but demo to them means you can just take a look at options and not actually demo them.
i do not want to pay for software since i will only be using it once FFS.any recommendations please?
Macbook Pro running on OSX Mavericks is having problems.
Today I turned my Mac on, and it started up with a loading wheel and a loading bar. When the loading bar finished, the Mac turned itself off. I tried many times, same happened every time. I then went into OSX Recovery, started repairing Macintosh HD, but the error message saying "Disk Utility can't repair Macintosh HD" came up and now I don't now what to do.
Is there any way I can back up my files in this situation? Is there any way I can repair the disk without having to erase all data and reinstalling OSX? Or do I really need to bring it to a Apple Store for repair?
Info:
MacBook Pro, OS X Mavericks (10.9.4)
i need to merge partitions on external drive. one is empty, one is not. i tried with ipartition demo, but demo to them means you can just take a look at options and not actually demo them.i do not want to pay for software since i will only be using it once FFS.
View 2 Replies View RelatedI have a MacBook Pro running Mavericks.
Recently I noticed that if I run Check Disk in Disk Utility, all the process works correctly but at the end it doesn't tell me that everything is correct (in green).
On the contrary, if I run it in recovery mode, (reboot w cmd-r), it works correctly to the end with the correct green result at the end.
Is it possible to merge two partitions at Mac hard drive without re-installing the OS.
View 4 Replies View RelatedBasically, I have 2 mac partitions and a windows 7 partition. The problem is the partitions are in order of OSX, Windows 7, OSX Partition 2. I keep trying to format the final partition which is osx partition 2 and join it with my main installation partition OSX but it wont let me. I really want to add that extra space over and not have it as a separate partition but I dont know how.
View 4 Replies View RelatedThis is what get when I go into Disk Utility and I want to delete the partition Macintosh 2. I see these 3 things. The "Logical Volume Group" and the 2 partitions. Where is my main hard drive? How do I get rid of the Macintosh 2.
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
I was in the recovery hd, and i was partitioning my main drive into to partitions. while it was pertitioning, i accidently quit the disk utility. i saw that now the hd was in one partition and was nearly full (it was half filled before). i did a disk repair and it came back to half filled. now that i retry to partition it it gives me error
" Partition failed with the error: Couldn’t modify partition map because file system verification failed."
Is there anything I can do except from reinstalling everything?
Info:
MacBook Pro, OS X Mavericks (10.9.1)
I use Disk Utility (stand alone, on a USB key) to make backups of my system disk to an external disk and then transfer it from my home system to a MacBook and vice-versa when I need to travel.
Recently, I upgraded from 10.9.2 to 10.9.3 and, not long later, to 10.9.4. In the same period, I also had an increase (not a very big one, just a few GB, less than 15) in the occupied space of that system disk. The current amount of data on it is 164.64 GB.
I'm not sure if my problem comes from the sub-version upgrade, from the increase in data size, from both, or from something else. The home computer is an iMac with a 318.88 GB internal disk. The MacBook has a 500 GB internal disk. The partitions used on the external disk to make bootable backups are 400 GB big.
I can backup both internal disks to the external partitions (and boot on the resulting external disk when I check that it is usable). I can also copy the external backups to the MacBook system disk and boot on the result without problem.
But, recently, Disk Utility has started to refuse copying the content of the external backup partitions to the internal disk of the home system. It says there is insufficient space on the target volume. If the error message is correct, it means that I cannot backup 164.64 GB of data on a 318.88 GB volume!
For the record, the external backup partitions are OK when verified with SOS.
Info:
iMac, OS X Mavericks (10.9.4), 4 GB memory
I just used Disk Utility to make a backup of a MBA (65GB) onto a 500GB external drive (Restore from internal HDD to external HDD). I then reformatted the internal hard disk and proceeded to restore my backup (external HDD to internal HDD). I soon received an error message stating "Restore Failure - not enough space". I guess that means Disk Utility backups are a one-way operation, since you can't restore from a larger drive to a smaller one? Is there something I am overlooking? I ended up using Carbon Copy Cloner to do the job, but I'm wondering how (if?) restoring from a larger backup drive is possible using Disk Utility?
View 1 Replies View RelatedI have a 3 TB disk that I used for video files that I now want to use for backup. So I wanted to erase and partition the drive to wipe it clean. So after going into Disk Utility and "trying" to erase and partition the drive, it now only shows the drive and no volumes.I cannot create or partition volumes. I tried verifying and repairing the disc but that didn't do anything. The only buttons available are Verify, Info and Burn. What do I do to use the drive again?
View 2 Replies View RelatedTried to create a bootable clone using Disk Utility & got this:“Restore Failure, Recovery partition restores can only be done on GPT partition maps.”I may need to purchase Carbon Copy Cloner ($40) or Super Duper ($28).I had been using my free CCC v. 3.4.7 to make clones of OS X 10.6.8 but now I upgraded to OS X 10.9.4 & got message that CCC not compatible with Mavericks unless I buy the CCC v. 3.5.6.I read several places that DU can do back up clones same as CCC or SD!I launched DU from recovery system, selected Mac HD as source & my XHD as destination. Both are formatted Max OS Extended (Journaled)So, what am I doing wrong?Also, what advantages, if any, are there in using CCC or SD instead of the free DU?
Info:
iMac, OS X Mavericks (10.9.4), 4 GB RAM, Win XP Pro-Boot Camp
Having trouble with my backup drive. It's a 1TB WD My Passport Ultra.
The drive mounts in Finder, but is extremely slow. In Disk Utility, the drive shows the correct disk space usage and number of files; but in Finder it only shows the folders/files at the root level of the drive, and each has a size of zero bytes with no items:
What is happening? How can I access the data (it's obviously still there if DU shows the files) and (possibly) fix this?
Info:
MacBook Air (13-inch Mid 2013), OS X Mavericks (10.9.4)
I wish to change partition scheme, sizes, in an external drive. All the partitions are MacOS extended (Journaled) and they map, according to the layout in Disk Utility, as follows: Partion 1, 2, 3,4 where 1 is at the top and 4, the bottom. I want to make partition 2 larger, so I decreased partition 1 by half. Now the layout is 1 a, 1b, 2,3,4., where 1b is now free space. Disk Utility will not allow me to increase the size of partition 2 by dragging the corner. Which of the following options (if any) will allow me to increase the size of partition 2, without erasing the data, using Disk Utility:Select partition 2 and manually writing a new value in the size box, equal to the present partition’s size plus the free space?If I delete partition 1 completely, will I then be able to increase the size of partition 2?If I delete partitions 1, 3, and 4, will I then be allowed to increase the size of partion 2?Is there another option?
(Actually, partition 3 is an eDrive, a data recovery utility created by TechTool Pro 7, so I don’t really know how it’s formatted.)
SeagateHD 1.5TB USB drive.
Info:
Time Capsule 802.11n (2nd Gen), OS X Mountain Lion (10.8.2), MacBook Pro, iBook Dual USB
When launching in the Recovery HD mode, my click on the trackpad does not work and I am unable to select a Disk Utility. Product data: Macbook, Late 2008 running OS Mavericks 10.9.4.
Info:
MacBook, OS X Mavericks (10.9.4)
Did a fresh Bootcamp install of Windows 7 on my MBA running 10.9.4, switched back and forth a few times and now the BOOTCAMP partition doesn't show up in the left pane in Finder. I hopped into Disk Utility to see what was going on and it was there, just not mounted, so I clicked mount, was told it couldn't be mounted, and it suggested I run first aid on it. I clicked Verify, nothing useful to me, then Repair, and got quite a lot of feedback that I do not understand, and then after that it was still unmountable.
I tried to copy everything it said into a pastebin because it was very long with lots of starting and stopping and counting percents inbetween, but it was over 500kb and that's the limit for free users on pastebin, so here's a trimmed version. [URL] .... I tried booting into Windows after that, and it jumped into System Repair. Apparently, according to Windows, my Boot Manager is missing or corrupt... and since I still can't access it from the Mac side of things, I thought I'd just wipe the partition in BootCamp Utility and start over.
Except instead, I get this error: "Your disk could not be restored to a single partition.An error occurred while restoring the disk to a single partition."
Disk Utility let me wipe it but I still can't mount it, either, again suggesting I run first aid on it (this does nothing). I can't boot into the Mac's Recovery mode either. It just jumps straight to Internet Recovery. When I hold option upon boot, all three partitions show up (Mac, Recovery, Windows), but when I click the recovery one it loads for a bit and then the laptop just instantly shuts off.... Have I corrupted my internal harddrive perchance?
Info:
MacBook Air (13-inch Mid 2012), Windows 7
I am contemplating an upgrade from my 5400 RPM 500GB HDD to a 7200RPM 500GB Seagate Momentus XT.
The problem is I have a 400GB Mac OS X partition along with a 100GB Windows 7 partition.
SuperDuper and CCC seem to only support AFS+ partitions so I can move over Mac OS X easily, but neither can copy both partitions.
Is there some kind of boot utility that will clone the hard drive pretty much exactly? I'd prefer to not have to reinstall W7 on the new drive as I have an upgrade copy and it is a pain to get a clean install activated.
I am trying to check my Harddidk by doing a Verify. So I went to Utilities, select the Harddisk, and then click VERIFY.
Then I the following message pops out: "Disk Utility stopped verifying "Ryan ManUtd" (note: Ryan Utd is the name of my harddisk)
Then it the window panel, there is a message which says: "Error: Live file System repair is not supported"
What does this mean ? Other than that, I can still access the contents in my harddisk ...
Info:
15.4, Mac OS X (10.6.8), 27" iMac - 4GB RAM, 1TB HDD, 1GB ATI Radeon HD, i5 QuadCore
