OS X Mavericks :: Change Partition Of External Drive Using Disk Utility?
Aug 25, 2014
I wish to change partition scheme, sizes, in an external drive. All the partitions are MacOS extended (Journaled) and they map, according to the layout in Disk Utility, as follows: Partion 1, 2, 3,4 where 1 is at the top and 4, the bottom. I want to make partition 2 larger, so I decreased partition 1 by half. Now the layout is 1 a, 1b, 2,3,4., where 1b is now free space. Disk Utility will not allow me to increase the size of partition 2 by dragging the corner. Which of the following options (if any) will allow me to increase the size of partition 2, without erasing the data, using Disk Utility:Select partition 2 and manually writing a new value in the size box, equal to the present partition’s size plus the free space?If I delete partition 1 completely, will I then be able to increase the size of partition 2?If I delete partitions 1, 3, and 4, will I then be allowed to increase the size of partion 2?Is there another option?
(Actually, partition 3 is an eDrive, a data recovery utility created by TechTool Pro 7, so I don’t really know how it’s formatted.)
SeagateHD 1.5TB USB drive.
Info:
Time Capsule 802.11n (2nd Gen), OS X Mountain Lion (10.8.2), MacBook Pro, iBook Dual USB
View 2 Replies
ADVERTISEMENT
Apr 24, 2012
I have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Info:
iMac, Mac OS X (10.7.3)
View 3 Replies
View Related
Sep 2, 2014
I've been running a Toshiba 1TB external drive on my Mac Pro tower and it's been working fine. But yesterday it wouldn't mount. I could see the drive in Disc Utility, but the partition wouldn't mount. I brought it into work where I'm running an iMac and it mounted just fine. Why would it stop working on one computer (where it was previously fine) yet work okay on another? And how do I get it working on the tower?
Info:
Mac Pro, iOS 7.1.2
View 1 Replies
View Related
Jan 7, 2011
I have an external 750GB hard drive that I previously formatted as FAT 32 because I wanted to be able to plug it into Windows computers as well. I was not very thoughtful at the beginning and I just created one big 750GB partition. I currently have 450GB used and about 300GB free.
I would like to create a new partition in the free space without losing the data I have in the disk, and format the new partition as Mac OS Extended to use it for Time Machine backups. Presumably Disk Utility can do it, but when I go to the "Partition" tab it says "This partition cannot be modified" and the "+" sign below it is grayed.
View 3 Replies
View Related
Apr 18, 2010
The hard drive is a 1TB Western Digital my book I bought it in January I think. I tried to format it to Mac OS Extended (Journaled) when I got it but for some reason every time I try to erase the part thats named disk3s2 or partition the main one it stops a little before half way through. I don't think its the hard drives fault so I called apple about it one day and they helped a little but it didn't work. Thanks in advance if you can help me. Also a few times I waited about seven hours for it while I was at school and when I came home it didn't move.
View 8 Replies
View Related
Apr 28, 2010
I have a Lacie 1TB external drive. I'm trying to create another partition on it using Disk Utility so that I can use one of the partitions for Time Machine. When I go to add another partition, or even just resize the existing one, I get an error saying drive must be HPFS+ with Journaling enabled. It is. I've seen reference to this error in searches, but have not found a solution. Is there a fix for this, or another tool that I can use to re-partition my drive without wiping out existing partition? I have about 450GB worth of data on the drive that I might be able to store somewhere else temporarily, I would just prefer not to have to go through that....
View 1 Replies
View Related
Jan 29, 2010
I have a 1/3 full external drive that is currently formatted for MAC OS External.
I want to partition the drive in half and use the 2nd partition for Windows FAT32.
However, when I try to do this with Disk Utility it does not give me the FAT32 option.
View 5 Replies
View Related
Jun 3, 2014
Disk Utility Crashed whilst creating a Partition, and I now have ~100GB missing, which was the amount I had allocated to the new partition.
The new partition didn't get created, and I now have 100GB missing from the Hard drive. I have a 1TB hard drive, and when I go to Disk Utility, it says: Capacity : 999.35 GB (999,345,127,424 Bytes)Available : 586.1 GB (586,103,844,864 Bytes)Used : 310.52 GB (310,524,317,696 Bytes)
Which adds up to about ~900GB.
I tried Repairing Disk in Disk Utility, booting into Recovery Mode and Repairing Disk there, but neither made a difference.
Info:
MacBook Pro (15-inch Mid 2012), OS X Mavericks (10.9.3)
View 4 Replies
View Related
Sep 7, 2009
Anyone knows why my external HD (USB disk connected to Airport extreme) does not show up in disk utility? (It sits on my desktop just fine and is fully functional) I' want to erase a partition but now i don't know how.
View 4 Replies
View Related
Aug 22, 2014
This is what get when I go into Disk Utility and I want to delete the partition Macintosh 2. I see these 3 things. The "Logical Volume Group" and the 2 partitions. Where is my main hard drive? How do I get rid of the Macintosh 2.
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
View 13 Replies
View Related
Jun 23, 2014
I have a 3 TB disk that I used for video files that I now want to use for backup. So I wanted to erase and partition the drive to wipe it clean. So after going into Disk Utility and "trying" to erase and partition the drive, it now only shows the drive and no volumes.I cannot create or partition volumes. I tried verifying and repairing the disc but that didn't do anything. The only buttons available are Verify, Info and Burn. What do I do to use the drive again?
View 2 Replies
View Related
Sep 3, 2014
Did a fresh Bootcamp install of Windows 7 on my MBA running 10.9.4, switched back and forth a few times and now the BOOTCAMP partition doesn't show up in the left pane in Finder. I hopped into Disk Utility to see what was going on and it was there, just not mounted, so I clicked mount, was told it couldn't be mounted, and it suggested I run first aid on it. I clicked Verify, nothing useful to me, then Repair, and got quite a lot of feedback that I do not understand, and then after that it was still unmountable.
I tried to copy everything it said into a pastebin because it was very long with lots of starting and stopping and counting percents inbetween, but it was over 500kb and that's the limit for free users on pastebin, so here's a trimmed version. [URL] .... I tried booting into Windows after that, and it jumped into System Repair. Apparently, according to Windows, my Boot Manager is missing or corrupt... and since I still can't access it from the Mac side of things, I thought I'd just wipe the partition in BootCamp Utility and start over.
Except instead, I get this error: "Your disk could not be restored to a single partition.An error occurred while restoring the disk to a single partition."
Disk Utility let me wipe it but I still can't mount it, either, again suggesting I run first aid on it (this does nothing). I can't boot into the Mac's Recovery mode either. It just jumps straight to Internet Recovery. When I hold option upon boot, all three partitions show up (Mac, Recovery, Windows), but when I click the recovery one it loads for a bit and then the laptop just instantly shuts off.... Have I corrupted my internal harddrive perchance?
Info:
MacBook Air (13-inch Mid 2012), Windows 7
View 4 Replies
View Related
Mar 24, 2009
I'm trying to use my 500 GB external HD as solely a storage drive now whereas it used to be storage and backup, with separate partitions for each. I have deleted the backup partition (the first partition) successfully with Disk Utility, but how can I resize the remaining partition into the free space before it on the disk? I can't drag it or enter the desired size in the text box, it doesn't seem to want to get any larger. Is there any way to do this without purchasing ipartition? I have an old version from Tiger, but I'm not sure if that will work safely on leopard, and I do not want to lose my rather larger collection of ripped dvds on this external drive. Here's a screen shot of what i now see in disk utility.
View 5 Replies
View Related
Jul 18, 2010
I deleted my Boot Camp partition in Disk Utility (as usual, Windows wasn't working and wouldn't fix). I resized my Macintosh HD partition to cover the whole drive and repartitioned. Now Disk Utility says that the partition's capacity is 160 GB and that I've used 40 GB and that 70 GB is available. My Boot Camp partition was 50 GB. I've read that to fix it I have to boot from my install DVD, go to Disk Utility, set the number of partitions to one, and delete the entire drive so that there's zero data left. Then I'd reinstall OS X and restore from a Time Machine backup. As of now, I have no external hard drive.
View 2 Replies
View Related
Mar 31, 2009
I've been backing up my Powerbook G4 for a few months using Time Machine to an external firewire drive with two partitions; one for the backups, and a much larger one for all my music, video, pictures, etc. I got a new mac mini over the weekend and I want to format the Time Machine partition without erasing the one with all my other files so I can start backing up the Mini.
Is this possible using Disk Utility? If so, how?
Both computers are running Leopard.
View 1 Replies
View Related
Nov 12, 2009
I was making a partition on my USB external drive in order to put a disk image of Snow Leopard on it, so I could boot off of it.
I added a 10GB partition to the drive, and clicked Apply. The following dialogue box came up:
Partitioning this disk will change some of the volumes. No volumes will be erased.
This volume will be added:
"Snow Leopard"
This volume will be resized:
"XXX HDD"
I clicked Partition, and it finished very quickly. I checked Finder, and the entire drive, BOTH partitions are completely empty.
View 2 Replies
View Related
Jun 27, 2014
I have a Seagate 1 TB Backup Plus Drive which was working perfectly fine until I plugged it into a USB hub. It detected it while in the hub and I was able to get files off of it, but when I ejected it from the hub and put it back into the USB slot on the computer it was not detected by finder. It shows up in the disk utility and I clicked verify and repair and it says:
Verify and Repair volume “Seagate Backup Plus Drive”
Checking file system
Volume repair complete.
Updating boot support partitions for the volume as required.
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Is there any way to get this to work properly again? Or if not is there a way for me to recover my files on the external hard drive?
I have a Macbook PRO late 2011 running OS X Mavericks.
View 1 Replies
View Related
Aug 20, 2014
I have a new iMac using OS 10.9.4. I got an external HD for backup purposes and successfully formatted it. Now I want to create partitions; however, my Disk Utilities app does not contain any tab or command for creating partitions. Where should I be looking?
View 4 Replies
View Related
Nov 7, 2009
i just erased my external hard drive through disk utility my accident. I had VERY important files and the 1tb was full.
View 3 Replies
View Related
Jan 12, 2010
First some background info. I recently purchased a 1TB hard drive for my 13" MBP, and I am about to do a clean install of OSX 10.6 and Win7 64bit on separate partitions.
And I want to setup the partitions before I install using Disk Utility. The reason for this is because I'm under the assumption that when creating a NTFS partition its better for the disk to be blank so it can put the MFT(Master file table) and MFT Mirror wherever it wants instead of some random spot on the disk (that way disk writes will be faster). The MFT thing was true when converting a FAT32 disk to NTFS. Nativity formatted NTFS disks were always faster then ones converted from FAT32, because the MFT was spread out instead of at the start of the disk.
I'm worried that installing OSX and then using the bootcamp utility will cause the MFT on my NTFS partition to end up in a un-optimal place and disk Reads/Writes will be slower.
Ok, so here's my questions.
1.) Should I be using a GUID Partition Table or Master Boot Record(Remember OSX 10.6 and Win7)?
2.) Should I use Disk Utility to Create a the OSX partition and then leave the second partition as Free Space? / Or should I use a third party utility and make the OSX partition and the NTFS partition at the same time?
3.) If I do create the partitions Manualy, will bootcamp still work correctly?
4.) Should I Use Journaled or Case-Sensitive Journaled on my OSX partition?
I know all of the questions were stupid, but there isn't any info on the web about it.
View 6 Replies
View Related
Mar 11, 2010
My PowerBook G4 crashed and I need data from it. I already had bought an external drive and had begun loading some fotos and music. Now I'm at a friend's Mac, firewired and all, and the external drive (visible in the disk utility) isn't to be found.
I don't want to erase and reformat, obviously, ... can I drag it onto the desktop from the disk utility?
View 9 Replies
View Related
Oct 17, 2010
I have an external hard drive that was used on a PC. I want to use it on a Mac. I went into disk utility and did an erase. (Extended Journaled and in security options changed it to zero out data). I can now use it on the Mac how ever it is telling me that there is 54.1 MB of used space. I want to have access to this. How do I do it?
View 4 Replies
View Related
Aug 29, 2014
I've recently converted to the Mac-side:
I'm having difficulty with my external hard-drive, here's the info on that one:
Disk Utility won't allow me to mount the drive, I've tried using a number of softwares to read it (working under the assumption that it's an NTFS drive), including Tuxera and Paragon. I have too much stored on the hard drive to empty it back onto my old computer, and so I'm not able order to re-format it.
Info:
MacBook Air, OS X Mavericks (10.9.4)
View 1 Replies
View Related
Feb 8, 2010
Disks I put in the Superdrive, external hard drives, or anything in the USB or Firewire (thumbdrive, etc) -- nothing shows up on the desktop. All are visible in Disk Utility. USB thumbdrives and external hard drives are visible in the sidebar in Finder, but disks are not (only disk utility).
Because of this I can't burn a disk because the disk is not being recognized. In Disk Utility, the external hard drives appear mounted and can be opened in Finder, but why aren't they appearing on my desktop (they used to)?
View 1 Replies
View Related
Dec 23, 2007
Will running the 'repair disk' disk utility on an external drive screw up any of the files on my external hard drive? I only want to run it because I can't transfer a file from my HD to the external...it's a 6 gig video file in quicktime format, and I'm getting 'error 1309', which I understand is related to file size on FAT32 format. I know it's a huge file, but I've moved others to the external that are over 20 gigs with no problems (iMovie projects, etc). Anything I can do to get this file moved to the external?
View 6 Replies
View Related
Jun 10, 2012
I had downloaded some files to add to an external hard drive, the hard drive was assigned to a pc before adding these files so it wouldn't let me add files from my MacBook..
Had a look around online and made some changes (well thats what I thought) and I was able to transfer files form my MacBook onto the external hard drive.
What I then figured out was that there was nothing left on the hard drive except for the two file sI just transferred..
It turns out I deleted everyting without noticing.
The stpes I followed was to go to disk utility then select the hard drive and click erase (not knowing this would erase evrything).
So now I have two files on my hard drive and no idea how to recover the 'delted' files.
I tried using Disk Drill, which found the files but then it said I need to buy the full version to recover them.
I am wondering if there is any free methods to recover these files at all
Info:
MacBook Pro (13-inch Early 2011)
View 3 Replies
View Related
Oct 9, 2010
I had windows vista installed but suddenly the audio decided to become faulty, after spending a day trying to fix it i realized I have a windows 7 install disc so i might as well just replace vista with windows 7. I didnt take care of vista or ever register it so it became quite a task to upgrade so i just deleted the partition and went to create a new one and just do a full install of windows 7.
I made the partition but the wrong format, so i removed it through boot camp assistant and created another, except now it keeps giving me the "back up the disk and use disk utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using boot camp assistant again" Now, I'd love to do this, except I have no idea what I'm doing and WHY this error has occured. After becoming frustrated I switched from my imac to my macbook pro and received the same error when trying to create a partition. So any help on exactly what I need to do would be a HUGE help. I only use windows for music production (I know, seems backwards, but I use Sony Acid and FL Studio so I'm stuck with Windows)
View 8 Replies
View Related
Apr 6, 2012
I have run the Disk Utility verify function against my system partition. It tells me there are minor issues that need fixing up and I should run the repair disk function, by booting using Command-R and using the Disk Utility to repair the drive.Problem is, when I boot using Command-R and select Disk Utility the partition is shown greyed out and the Verify and Repair options do not work.I think this could be because the partition is encrypted. The utility does not offer me the chance to unlock the partition with my passphrase.How can I repair the filesystem errors on this partition?
View 2 Replies
View Related
Sep 8, 2010
My new 2010 hexacore Mac will have 24G memory, an OWC Extreme Pro 120G SSD (positioned in the lower optical bay) and four 2TB WD RE4 drives. I'll use my old Synology 209 NAS (two 1TB WD Green Raid 1 drives) for TM backups over 1000Mbps Ethernet. Yes, I'll need to upgrade to a larger NAS very soon. This will be my first Mac Pro (have MBPs and iMac) and will be used for web design and development (mostly Adobe CS5 products).
The SSD will be used for boot and application files. I plan to use Disk Utility to create a 1+0 Raid array for data files. For a Scratch disk, should I:
1) create a partition on the 1+0 Raid Array for Scratch
2) partition a chunk of the SSD for Scratch
3) attach a spare external 2.5" WD drive via Firewire 800 for Scratch
Based on my reading, it seems that option 1 makes the most sense but I'm not entirely sure if you can partition a 1+0 array with Disk Utility. I'm pretty sure option 3 is quite silly but wanted to toss out the idea. Lastly, are there any generic recommendations on scratch volume sizing?
View 14 Replies
View Related
Nov 20, 2009
I have a 640GB external USB hard drive that I use for time machine currently. I would like to go in and add a partition to load movies to and plug it into my PS3. Can I use disk utility to create a new partition without erasing the stuff already on the disk?
And then is it possible to format a partition larger than 32GB as FAT?
View 3 Replies
View Related
