I've a lot of files in Mac and my time machine back up drive now. Since most of my files are spreadsheet, doc, MP3 files and they can inter use in my Mac and Windows 7 PC. There are 4 Mac partitions and one PC partition in Mac Disk utility I can use. Do you know which partition I can use and Windows 7 PC will see them. In this case, I can just use that partition transfer the files form Mac to PC?
View 2 RepliesI have just had a new MBP delivered, its come through a company that provides machines for dyslexic students (myself). Its a replacement for my previous mac that I owned, suffice to say the other got destroyed. The company for some unknown reason put 2 partitions on the hard drive, its really annoying as I need to use the migrate assistant to put my old system on it and the 2 partitions are to small to accommodate it. My question.
1. Is it possible to combine these 2 partitions and if so how would I go about doing this from within the disk utility?
2. Is it also possible to transfer my partition over which held my bootcamp partition from my previous machine?
I am trying to make a single partition with Mac OS Journaled but Disk Utility won't let me. I currently have 2 partitions: MacHD with 80Gb and partition B with 3,35Gb (Partition where I used to have XP with BootCamp). I finished with XP and erased that partition to become Mac OS Journaled. Now I try to have a single partition but I couldn't. On the Partition tab of Disk Utility, when I select the whole machine (FUJISTSU MHW2120BH) the option Partition is dimmed and won't work.
I also tried iPartition, but it tells me: To make changes to this disk you should either boot from an external drive, use Target Disk Mode with another Mac, or create a bootable CD/DVD. You can create a bootable CD/DVD by running Coriolis CDMaker, which should be available from you distributor. I thought my instalation DVDs would work as bootable, but: I tried with the Tiger instalation DVDs but it makes me chose one of the partitions to format and won't let me do both at once.
Seems that I have messed up my Macbook Pro hark disk. Opening disk utility on macosx 10.5.8 shows that my disk in partitioned as this:
1)Macintosh HD
2)Apple_HFS disk0s3
3)Linux Swap
All of them appear to formatted as Mac OS extended (journaled) although the Linux Swap partition appears as Unmounted and cant be mounted nor use first aid on it. the others 2 appear to ok on verify disk test. What I want to do is remove partition 2 and 3. As I mention disk utility fails both under macosx and also when i use it booting from Mac OS X install disk. Should I use something like g-parted to boot from and re arrange my partitions or will this further mess up my disk? will MBR be affected?
I want to merge two OS X partition into one. In both of them it's installed OS X Mavericks but I don't need anymore the first partition.
Here's a screenshot of the partition table
I need to merge the 123.3 GB partition with the 34.9GB. Using Disk utility, if I erase the partition number 2, then can i merge the empty space (formatted with Mac OS X journaled) into the partition number 1, without loosing any file?
I'm using OS X 10.9.5, with Disk Utility version 13.
One of my internal drives has two partitions of 1 TB each.
Can I use Disk Utility to RESIZE one of the partitions to 1.75 TB?
Looking at the DU interface instructions, it says "To resize a partition on the selected disk, drag its resize control and click Apply."
However, Disk Utility says "To enlarge a partition, you must delete the partition that comes after it on the disk, then move the partition’s end point into the freed space. You can’t enlarge the last partition on a disk."
So, all I want to do is Reduce the size of the bottom / last partition; then, Increase the size of the top / first partition.
Can I safely do this by first dragging the last partition's "resize control" then dragging the first partition's "resize control"?
I am thinking of doing a triple boot (SL, Debian and Win7). However because I am really doing this because I can (or at least attempt), it strikes me at some point I might decide I want to go back to all Snow Leopard. Now here's the thing; is it easy to increase the space of the SL install again if I decide to trash Win7. I'll build the space for Debian at the end as I am positive I won't be trashing that partition.
So something like:
Snow Leopard - 250GB
Windows 7 - 125GB
Shared Partition (probably NTFS) - 50GB
Debian - 75GB
The most likely partition to go is the Win7 one and I would like to either add it to Snow Leopard or the Shared Partiition. That is, I would like to increase the size of one of them.
I recently replaced Leopard 10.5 with a clean installation (not an upgrade) of Snow Leopard 10A432 (SL) on my Intel Core 2 Duo MacBook (aluminum, 2GB RAM). Under Leopard 10.5 I was able to use Disk Utility (DU) to dynamically re-size existing volumes on USB hard drives. But under SL I am unable to do so. While I am able to replace all existing partitions on a USB drive with a new set of partitions and resize them prior to their creation by dragging the slider bars, once created, DU will not let me dynamically resize the new partitions. Doing so was easy with DU under 10.5. For example, after I re-partitioned a USB drive with DU under SL and created 2 partitions, I was able to make the top partition smaller by dragging the bottom edge upward from the lower right corner, but there seems to be no way (and no slider bars) to adjust the size of the lower partition to use the space freed by having made the upper partition smaller. In fact, although the upper partition reports a smaller size, when clicked on, the border around the upper partition still includes the range defined by its initial, larger size. There also seems to be now way (no slider bars) at the top edge of partitions that would allow them to be expanded/contracted from the top down. Has anyone else encountered these issues? Any thoughts/suggestions as to how to resolve them? Are these known issues? I have searched but not come across it as yet.
View 5 Replies View RelatedI need an AppleScript to restore a bunch of partitions from a master drive to a stack of external target drives. I don't mind partitioning them 1st, if necessary.The master drive has 16 partitions, all equally sized, and I'd like a script to run that will have Disk Utility to just go down the list restoring each partition to the matching 16 partitions on one of the target drives.
Info:
Mac OS X (10.7.3)
I have a new iMac using OS 10.9.4. I got an external HD for backup purposes and successfully formatted it. Now I want to create partitions; however, my Disk Utilities app does not contain any tab or command for creating partitions. Where should I be looking?
View 4 Replies View RelatedI have a Windows Ultimate DVD. I want to make a back up of it and use this DVD when I need to install Windows on my machine. If I make a disk image of this DVD and then burn the image back to a DVD will it function or do I need another tools? ( like toast )
View 1 Replies View RelatedI had windows vista installed but suddenly the audio decided to become faulty, after spending a day trying to fix it i realized I have a windows 7 install disc so i might as well just replace vista with windows 7. I didnt take care of vista or ever register it so it became quite a task to upgrade so i just deleted the partition and went to create a new one and just do a full install of windows 7.
I made the partition but the wrong format, so i removed it through boot camp assistant and created another, except now it keeps giving me the "back up the disk and use disk utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using boot camp assistant again" Now, I'd love to do this, except I have no idea what I'm doing and WHY this error has occured. After becoming frustrated I switched from my imac to my macbook pro and received the same error when trying to create a partition. So any help on exactly what I need to do would be a HUGE help. I only use windows for music production (I know, seems backwards, but I use Sony Acid and FL Studio so I'm stuck with Windows)
I am having an issue Partitioning my Internal HDD because some files cannot be moved it was able to Partition a while back when Installed Vista but I deleted that Partition as I needed a bigger one for Windows 7 Beta It says I need to "Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume." does that mean I have to reformat my entire HDD? as I don't want to do that.
View 1 Replies View RelatedI'm currently in the process of trying to install Win7 on my Macbook Pro (purchased July '07) using an ISO burned to a DVD with Disk Utility. Unfortunately, the DVD isn't bootable, and while the symptoms match what's in this blog post, the author's solution involved using a Windows-only program.
I'd like to know if it's possible to re-burn the ISO without the version number in the filenames as in the original solution, but with Disk Utility or something else that a Mac can use.
so i got this message "Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again." what do I do
View 3 Replies View RelatedI have used bootcamp to partition my disk and install windows vista onto my uMB. Now I want to partition the disk again to create a tri boot setup where I can either install ubuntu or the dev preview of snow leopard (I haven't decided yet). Can I just do this with disk utility and shrink my OS X partition in order to create a new partition or will this cause problems with the disk? I would really like to not do a fresh install of OS X because I have had to do this twice to fix disk problems relating to bootcamp.
View 12 Replies View RelatedI'm a serious photographer and do my post processing in Capture NX2 (2.2.4). Sometimes, especially when saving files, it drags on interminably. I have read that one way to speed up NX2 is to create a scratch disk. I'm currently upgrading my HD on my iMac G5 (Leopard) to a 1TB HD. Would it be wise (and efficient) to create a partition on the new HD and use it as a scratch disk? I understand you can't use the boot drive as a scratch disk, but if I partition will I be able toname the new partition something other than Macintosh HD, thus permitting use of a scratch disk?
View 6 Replies View RelatedAny 1 time free partition program that can create 2 partitions, one for Windows and 2nd for OS X in one USB HDD?
View 2 Replies View Relatedthe burning disk is maxwell dvd+r
an error appearing when burning ''failed to calibrate the laser power level''
i have mbp (late 2008)
how to fix it ?
I recently got a new hard drive and I want to install Mac OS X 10.5 and Windows XP on it.
Is it possible to format one partition with the Mac GUID for OS X and the other partition as a Master Record for Windows XP?
Or does Mac OS X/Windows XP dual-booting has to be done through the bootcamp?
I just recently bought my first macbook pro. I had a 500 GB WD elite passport drive. I partitioned it to Mac os extended (journaled)- for time machine and FAT for windows and mac file transfer and storage. I used disk utility to partition the drive. These two drives are detected in my mac, however when I plug in the external drive into my windows- no pop up appears telling me to open files. So I go into my computer and click on the (F) drive in my case. Windows vista then proceeds to tell me the drive must be formatted before it can be used. What problem do I have. All I want is 2 partitions one for time machine and another that will allow for data transfer and storage. I have looked but cannot seem to find and answer. I have a 160 gb hard drive, what amount of space do you recommend for the time machine partition.
View 4 Replies View RelatedI was burning an ISO to a dvd in Disk Utility, and it gave me the message "Verification of the burn failed" So, I tried running the dvd, and I didn't get any error messages. Do you think the disk/iso/whatever is good to use?
View 5 Replies View RelatedI am contemplating an upgrade from my 5400 RPM 500GB HDD to a 7200RPM 500GB Seagate Momentus XT.
The problem is I have a 400GB Mac OS X partition along with a 100GB Windows 7 partition.
SuperDuper and CCC seem to only support AFS+ partitions so I can move over Mac OS X easily, but neither can copy both partitions.
Is there some kind of boot utility that will clone the hard drive pretty much exactly? I'd prefer to not have to reinstall W7 on the new drive as I have an upgrade copy and it is a pain to get a clean install activated.
I noticed in disc utility that under the erase tab it has the option to format a drive to fat32. If I create a windows partition using bootcamp and then go into disk utility and erase to fat32 will this allow a boot into the xp drive? My xp disc keeps restarting before it gives me the opportunity to format the drive to either a ntfs or a fat so I need a way around this?
View 4 Replies View RelatedMy Computer: 2.8 GHz intel Core 2 Duo Mac, running OS X Ver. 10.5.8. I've partitioned my hard drive before, but in order to get more space on my Windows partition I have made a disk image using a program called Winclone. I also backed up important files to my external hard drive, and then used disk utility to erase and make a new partition so I could restore the Winclone disk image I made and have everything back. What I'm concerned about is I've been waiting for this new partition (65 GB) to finish being made and its taking a while. I read that if you stop the process it could damage the OS X side and you could lose all your files.
I started to run time machine about 10 minutes ago and set the destination to my external drive for backup (Its a huge drive, it can hold 650+ GB so I'm not worried about running out of space.) Do I stop Disk Utility and risk it? Do I let it run? Do I kiss my computer goodbye and pray that Time Machine backed everything up right onto my external hard drive? I don't know if Time Machine is working correctly because I started it after I began to partition my hard drive. What to do. Should I let Time Machine back everything up, the disconnect my external and end Disk Utility?
I am planning to upgrade my Windows 7 32 bit bootcamp partition to Windows 7 64 bit. I know I have to do a clean install to do this, so I am planning to wipe my Windows partition and start from scratch. I am trying to figure out how to remove my bootcamp partition though. If I use the bootcamp assistant, it seems like it will only give me 231gb of space back for Mac OSX. I have a 250gb HD, so where is the extra space going since my Windows partition is 42gb? Can I just delete it with Disk Utility to recover the space back? Could I possibly screw this up by using Disk Utility?
View 5 Replies View RelatedI created a DVD of files then put the DVD in my Mac, created an image from it with Disk Utility, then burned multiple copies to DVD using the image.
The DVD's burned from the image are unreadable under Windows. Why? What must I do to make them readable on PC's?
I can boot into bootcamp with no problems. I have been wanting to be able to open the bootcamp in Parallels. Here is the issue:
1. The partition 'disk0s3' is greyed out in Disk Utility. It is not mounted. Mounting does nothing.
2. For reference, the Windows 7 is formatted as NTFS. It is a Windows 7 64-bit install
3. Verify disk does the following:
Verifying volume "disk0s3" ** /dev/disk0s3
Invalid BS_jmpBoot in boot block: efbbbf
Error: This disk needs to be repaired. Click Repair Disk.
4. repairing does the following:
Verify and Repair volume "disk0s3" ** /dev/disk0s3
Invalid BS_jmpBoot in boot block: efbbbf
Volume repair complete.Updating boot support partitions for the volume as required.Error: Disk Utility can"t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
I have stuff on the Windows partition that I don't want deleted. I'm really stuck on this -obviously, I can just continue to boot into bootcamp, I just would rather open it from Parallels. I'm not sure what or if I made some mistake in setting up Bootcamp, I thought I followed the directions to that. I do know I formatted the partition as NTFS during the install - as I think Windows 7 requires it. I have tried installing NTFS-3G - it is installed, but didn't do any good when trying to mount the drive.
I can't find my windows partition it just shows as Macintosh HD. Although when I go into bootcamp it shows there is still 20gb assigned to windows but I screwed it up as I tried to extend the amount of GB I allowed to windows without reinstalling it. However I don't know what to do in Disk Utility now?
Model Name:MacBook Pro Model Identifier:MacBookPro7,1 Processor Name:Intel Core 2 Duo Processor Speed:2.4 GHz Number Of Processors:1 Total Number Of Cores: 2 L2 Cache:3 MB Memory:4 GB Bus Speed:1.07 GHz Boot ROM Version:MBP71.0039.B0B SMC Version (system):1.62f6
Info:
MacBook Pro
I would like to "Back-up", "Clone" or create an "Image" or whatever else people call it of my bootcamp installation. I know I can create an "Image" of bootcamp via disk utility but how would I restore it?
Would I first delete the bootcamp partition and then re-create a bootcamp partition and then restore? Or would I just restore? Will the end result be what I am expecting, i.e., my Win 7 install right back to the perfect state of when I created the image?
Right now, let's say my Windows 7 install got smoked one day for whatever reason (it is windows...) and I needed to re-install. Me personally, I would just go into Bootcamp Assistant, delete the Windows partition then create a new one and then get installing. Unfortunately installing and updating takes hours and that is what I am trying to avoid.
